シャーク HD101

Shark HyperAIR HD101 Fast-Drying Hair Blow Dryer

ユーザーマニュアル

重要な安全上の注意事項

電気製品を使用する場合、特に子供がいる場合は、次のような基本的な安全上の注意事項を常に従う必要があります。

  • 危険 – ほとんどの電気製品と同様に、スイッチがオフの場合でも電気部品は通電しています。感電による死亡のリスクを減らすために、次の点に注意してください。
    • 使用後は必ずこのアプライアンスのプラグを抜いてください。
    • 入浴中やシャワー中は使用しないでください。
    • 機器が浴槽やシンクに落ちたり引き込まれたりするような場所に置いたり保管したりしないでください。
    • 水やその他の液体の中に入れたり落としたりしないでください。
    • 電化製品が水の中に落ちた場合は、すぐにプラグを抜いてください。水の中に手を伸ばさないでください。
  • 警告 – 火傷、感電、火災、または人への傷害のリスクを軽減するために:
    • 電気製品は、プラグを差し込んだ状態では絶対に放置しないでください。
    • この機器を子供や特定の障害を持つ人が使用したり、子供や特定の障害を持つ人の上や近くで使用する場合は、厳重な監視が必要です。
    • この機器は、このマニュアルに記載されている本来の用途にのみ使用してください。製造元が推奨していない付属品は使用しないでください。
    • コードやプラグが損傷している場合、正常に機能していない場合、または水に落としたり、損傷したり、水に落としたりした場合は、このアプライアンスを絶対に操作しないでください。
    • コードを加熱面から離し、器具に巻き付けないでください。
    • 機器の通気口を絶対に塞がないでください。また、通気口が塞がれる可能性のあるベッドやソファなどの柔らかい表面の上に機器を置かないでください。通気口に糸くずや髪の毛などが入らないようにしてください。
    • 就寝中は絶対に使用しないでください。
    • 開口部に物を落としたり挿入したりしないでください。
    • 屋外で使用したり、エアゾール(スプレー)製品が使用されている場所や酸素が投与されている場所で操作しないでください。
    • この機器には延長コードを使用しないでください。
    • 目やその他の熱に敏感な部分に熱風を当てないでください。
    • アタッチメントは使用中に熱くなることがあります。取り扱う前に冷ましてください。
    • 動作中は機器を表面に置かないでください。

箱の中身

Your Shark HyperAIR HD101 package includes the following components:

  • Shark HyperAIR HD101 Hair Blow Dryer Unit
  • IQ Styling Concentrator Attachment
  • ディフューザーアタッチメント
Shark HyperAIR HD101 Hair Blow Dryer with IQ Styling Concentrator and Diffuser attachments

Image: The Shark HyperAIR HD101 hair blow dryer shown with its two primary attachments, the IQ Styling Concentrator and the Diffuser. The main unit is silver, and the attachments are black.

設定

  1. ユニットを開梱します: すべての部品をパッケージから慎重に取り出してください。梱包材は、将来の保管や輸送のために保管しておいてください。
  2. Attach Styling Accessories:
    • To attach the IQ Styling Concentrator or Diffuser, align the attachment with the nozzle of the hair dryer.
    • Push the attachment firmly onto the nozzle until it clicks into place. The magnetic connection ensures a secure fit.
    • To remove, simply pull the attachment away from the nozzle.
  3. 電源に接続: Plug the power cord into a standard 120-volt electrical outlet. Ensure your hands are dry before plugging in the appliance.

操作手順

The Shark HyperAIR HD101 features HyperAIR IQ Technology for intelligent styling. The dryer automatically adjusts heat and airflow settings when certain IQ attachments are used.

  1. 電源オン/オフ: ハンドルにある電源ボタンを押して、乾燥機の電源をオンまたはオフにします。
  2. 設定の調整:
    • The dryer has 4 distinct settings for heat and airflow.
    • Use the dedicated buttons on the handle to cycle through the available heat and airflow options.
    • When an IQ attachment (Concentrator or Diffuser) is connected, the dryer may automatically optimize settings for that attachment.
  3. Using the IQ Styling Concentrator:
    • Attach the concentrator for precise drying and styling.
    • Direct the airflow to specific sections of hair for smoothing or shaping.
    • Ideal for straight and wavy hair types to achieve sleek results.
  4. ディフューザーアタッチメントの使用:
    • Attach the diffuser for gentle drying and enhancing natural curls または波。
    • Place sections of hair into the diffuser bowl and lift towards the scalp.
    • Use a low heat and speed setting for best results to minimize frizz.
  5. クールショット機能: Press and hold the cool shot button to set your style with a burst of cool air.

メンテナンス

Regular maintenance ensures optimal performance and extends the life of your Shark HyperAIR HD101.

  1. エアフィルターのクリーニング:
    • Ensure the dryer is unplugged and completely cool before cleaning.
    • Locate the air intake filter at the rear of the dryer.
    • Gently twist or pull to remove the filter cover (refer to diagrams in a full manual if available).
    • 柔らかいブラシまたは布を使用して、フィルター スクリーンに蓄積した糸くず、ほこり、または髪の毛を取り除きます。
    • フィルターカバーをしっかりと取り付けます。
    • Clean the filter regularly, especially if you notice reduced airflow.
  2. Cleaning the Dryer Body and Attachments:
    • Wipe the exterior of the dryer and attachments with a soft, damp 布。
    • 研磨剤や溶剤は使用しないでください。
    • 保管または再使用する前に、すべての部品が完全に乾いていることを確認してください。
  3. ストレージ:
    • アプライアンスのプラグを抜き、完全に冷まします。
    • Store the dryer and its attachments in a dry, safe place, away from moisture and direct sunlight.
    • 電源コードを機器にきつく巻き付けないでください。コードが損傷する可能性があります。

トラブルシューティング

If you encounter issues with your Shark HyperAIR HD101, refer to the following common problems and solutions:

問題考えられる原因解決
乾燥機が作動しません。Not plugged in; power outlet issue; internal safety shut-off activated.Ensure the power cord is securely plugged into a working outlet. Check your circuit breaker. Unplug the dryer, wait 5 minutes, then plug it back in.
Low airflow or reduced drying power.吸気フィルターが糸くずや髪の毛で詰まっています。Unplug the dryer and clean the air intake filter as described in the Maintenance section.
乾燥機が過熱して停止します。Blocked air intake/outlet; prolonged use; internal safety mechanism.This unit has an auto shut-off and heat protection feature. Unplug the dryer and allow it to cool down for at least 30 minutes. Clean the air filter. Ensure air vents are not blocked during use.
乾いた後、髪が縮れてしまいます。Incorrect heat/speed setting; improper technique; lack of ionic benefit.Ensure you are using appropriate heat and speed settings for your hair type. For curly hair, use the diffuser on a low heat setting. The ionic feature helps reduce frizz; ensure the dryer is functioning correctly.

仕様

特徴詳細
モデル名ハイパーエア
モデル番号型番
ブランドサメ
メーカーシャークニンジャ オペレーションズ LLC
電源コード式電気
巻tage120ボルト
設定数4
製品寸法(奥行き×幅×高さ)奥行き4.92インチ x 幅2.95インチ x 高さ11.02インチ
重さ3.37 ポンド
含まれるコンポーネント濃縮器、拡散器
髪質の相性Curly, Frizzy (also suitable for Straight, Wavy)

保証とサポート

For detailed warranty information, please refer to the warranty card included with your product or visit the official Shark webサイトでご確認ください。購入証明として購入レシートを保管してください。

If you require further assistance, have questions about your product, or need to claim warranty service, please contact Shark customer support. Contact details can typically be found on the manufacturer's webサイトまたは製品のパッケージ内。

オンラインリソース: For additional tips, styling guides, and FAQs, visit the official Shark webサイト: www.sharkclean.com

© 2024 SharkNinja Operating LLC. 無断複写・転載を禁じます。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.