GAMEMAX Master M905 Full Tower PC Chassis User Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your GAMEMAX Master M905 Full Tower PC Chassis. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and longevity of your product.

The GAMEMAX Master M905 is a full tower chassis designed for high airflow and extensive hardware compatibility, supporting E-ATX, ATX, and M-ATX motherboards. It features ample storage options, efficient cooling with pre-installed LED fans, and a user-friendly design for system builders.

パッケージ内容

インストールを続行する前に、すべてのコンポーネントが存在していることを確認してください。

• GAMEMAX Master M905 Full Tower Chassis
• 3 x 12cm 32 LEDs Blue Cooling Fans (pre-installed)
• Accessory Kit (screws, standoffs, cable ties, etc.)
• ユーザーマニュアル（このドキュメント）

セットアップとインストール

初期セットアップとコンポーネントのインストールについては、次の手順に従ってください。

1. シャーシの準備

Carefully remove the chassis from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the chassis and sliding the panels backward.

画像： 内部 view of the GAMEMAX Master M905 chassis with the side panel removed, illustrating the spacious interior and drive bays.

2. マザーボードの取り付け

Install the I/O shield into the rear opening of the chassis. Align your E-ATX, ATX, or M-ATX motherboard with the pre-installed standoffs. Secure the motherboard using the provided screws from the accessory kit.

画像： Diagram illustrating the internal layout and compatibility for E-ATX/ATX/M-ATX motherboards, maximum VGA card length, and CPU cooler height.

3. 電源ユニット（PSU）の取り付け

The Master M905 features a bottom-mounted PSU design. Install your power supply into the designated compartment at the bottom rear of the chassis. Secure it with screws from the outside rear of the case.

画像： Illustration of the bottom-mounted PSU design, highlighting the hidden compartment and cable management options for a cleaner build.

4. ストレージドライブのインストール

The chassis supports multiple storage configurations:

• 5.25" ODDs: Install up to three 5.25" optical disk drives in the front bays.
• 3.5" HDDs / 2.5" SSDs: Utilize the eight 3.5" HDD bays or eight 2.5" SSD bays. Note: Installing longer VGA cards may require removing the middle HDD bracket.

画像： 詳細図はasing the extensive storage capabilities, including 8 HDD bays and 2 SSD positions, along with cable management features.

5. グラフィックカードと拡張カード

Install your graphics card and other expansion cards into the appropriate PCIe slots on your motherboard. Ensure they are securely fastened. The chassis supports VGA cards up to 450mm in length.

6.ケーブル管理

Utilize the cable routing options behind the motherboard tray to organize and hide cables. This improves airflow and aesthetics.

7. フロントパネルI/Oの接続

Connect the front panel cables (USB 3.0, USB 2.0, audio, power, reset, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for specific header locations.

画像： クローズアップ view of the top panel, showing the USB 3.0, USB 2.0, audio ports, power button, reset button, and fan controller switches.

操作手順

電源のオン/オフ

Press the power button located on the top panel to turn your system on or off. A short press typically initiates power on, while a longer press (usually 4-5 seconds) will force a shutdown.

ファンコントロール

The top panel includes a fan controller. Use the switches to adjust the speed of the connected fans, allowing you to balance cooling performance and noise levels according to your preference.

フロントパネルの接続

Utilize the front panel USB 3.0 and USB 2.0 ports for connecting peripherals and external storage devices. The audio jacks provide convenient access for headphones and microphones.

メンテナンス

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC chassis.

ダストフィルターの清掃

The Master M905 features filtered front, top, and base air intakes with pull-out dust filters. Regularly remove and clean these filters to prevent dust buildup inside the chassis, which can impede airflow and component cooling.

画像： リアとボトム view of the chassis, highlighting the easily accessible, pull-out dust filters for convenient cleaning.

内装クリーニング

定期的にサイドパネルを開け、圧縮空気を使って内部コンポーネント、特にファンブレードやヒートシンクの埃を除去してください。清掃を行う前に、システムの電源をオフにし、プラグを抜いてください。

トラブルシューティング

If you encounter issues with your chassis, refer to the following common problems and solutions:

• システムが電源オンにならない:
  • Ensure the power supply is properly connected to the wall outlet and the motherboard.
  • Verify all front panel power switch cables are correctly connected to the motherboard headers.
  • Check if the power supply unit (PSU) switch is in the "ON" position.
• Fans are not spinning or LEDs are off:
  • ファン電源ケーブルがマザーボードまたはファン コントローラーにしっかりと接続されていることを確認します。
  • Check the fan controller settings on the top panel.
  • Ensure LED power cables are connected if applicable.
• Front panel USB/Audio ports not working:
  • フロント パネルの USB ケーブルとオーディオ ケーブルがマザーボード上の対応するヘッダーに正しく接続されていることを確認します。
  • Check your motherboard's BIOS/UEFI settings to ensure USB/audio ports are enabled.
• Excessive dust buildup:
  • Regularly clean the pull-out dust filters as described in the Maintenance section.
  • Ensure proper airflow direction with intake and exhaust fans.

仕様

画像： A diagram illustrating the key dimensions of the GAMEMAX Master M905 chassis.

保証とサポート

GAMEMAX products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official GAMEMAX webサイトをご覧いただくか、お近くの販売店にお問い合わせください。

さらに詳しいサポートについては、 AmazonのGAMEMAXストア または、製造元の公式サポート チャネルにお問い合わせください。