1. セットアップと組み立て
The LEQISMART S11 Electric Scooter comes mostly pre-assembled, requiring minimal setup before its first use. Follow these steps to prepare your scooter for riding.
1.1 開梱と初期検査
Carefully remove all components from the packaging. Ensure all parts are present and undamaged. The main components include the folded scooter body, handlebars (left and right), charger, and hex keys for assembly.
Image: The LEQISMART S11 Electric Scooter in its initial state, partially assembled within its packaging.
1.2 スクーターの展開
Locate the folding mechanism at the base of the handlebar stem. Lift the buckle lock and pull the stem upwards until it clicks securely into the upright position. Ensure the locking lever is fully engaged for safety.
1.3 ハンドルバーの取り付け
The handlebars are labeled 'L' for left and 'R' for right. Carefully screw each handlebar into its corresponding side of the stem. Use the provided hex keys to tighten them securely. Ensure the brake lever (left side) and throttle (right side) are positioned comfortably for easy access.
Image: The scooter in its folded state, highlighting its compact design for portability.
1.4 初期充電
Before your first ride, fully charge the scooter's battery. Connect the charger to the charging port located on the scooter's deck. The charging indicator on the charger will show the charging status. A full charge typically takes approximately 4.5 hours.
Video: An unboxing and test video of the LEQISMART S11 Electric Scooter, demonstrating assembly and initial features.
2. 操作手順
Familiarize yourself with the scooter's controls and operating modes for a safe and enjoyable ride.
2.1 Powering On/Off and Headlight Control
Press and hold the power button (located on the display unit) to turn the scooter on or off. Double-press the power button to toggle the LED headlight on or off. The headlight is adjustable to direct illumination as needed.
Image: The scooter's display panel illustrating the three available speed modes (10km/h, 20km/h, 25km/h).
2.2つのスピードモード
The scooter features three distinct speed modes, which can be cycled through by pressing the 'M' (Mode) button on the display unit:
- モード1（低速）: Approximately 6 MPH (10 km/h). Ideal for beginners or crowded areas.
- Mode 2 (Medium Speed): Approximately 12 MPH (20 km/h). Suitable for general riding.
- モード3（高速）: Approximately 15.5 MPH (25 km/h). For experienced riders on open paths.
The current speed and battery level are displayed on the LED screen.
2.3 スロットルとブレーキ
The scooter uses a non-zero start mechanism for safety. To engage the motor, push off with your foot to gain a slight initial speed, then press the thumb throttle on the right handlebar. The scooter is equipped with a dual braking system for effective stopping:
- 電子ブレーキ: 左ハンドルのブレーキレバーで作動します。
- ドラムブレーキ: A mechanical brake located on the rear wheel, also activated by the left brake lever.
Image: Close-up of the scooter's 8.5-inch pneumatic tires and the dual braking system for enhanced stability and safety.
Video: A detailed instructional video on operating the LEQISMART Electric Scooter, including controls and riding tips.
3. メンテナンス
Regular maintenance ensures the longevity and optimal performance of your LEQISMART S11 Electric Scooter.
3.1バッテリーケア
The scooter is equipped with a 270Wh lithium-ion battery. To maximize battery life:
- 最初に使用する前に完全に充電してください。
- バッテリーを完全に使い切らないようにしてください。バッテリー残量が少ない場合は、充電してください。
- Store the scooter in a cool, dry place when not in use, and ensure it has some charge.
画像: 詳細 view of the scooter's integrated battery system.
3.2 タイヤのメンテナンス
The 8.5-inch pneumatic tires require regular pressure checks. Maintain appropriate tire pressure for optimal ride comfort and range. Refer to the tire sidewall for recommended PSI. Regularly inspect tires for wear and tear or punctures.
3.3 一般的な清掃と保管
スクーターを広告で拭くamp cloth after use. Avoid using excessive water or high-pressure sprays. Store the scooter in a dry environment, away from direct sunlight and extreme temperatures. The foldable design allows for easy storage.
4。 トラブルシューティング
このセクションでは、スクーターで発生する可能性のある一般的な問題について説明します。
4.1 Scooter Not Powering On
- Ensure the battery is charged. Connect the charger and check the indicator light.
- 電源ボタンが正しく押し続けられていることを確認します。
4.2 航続距離または速度の低下
- タイヤの空気圧を確認してください。空気圧が低いタイヤは、航続距離と速度を大幅に低下させる可能性があります。
- Riding habits and terrain (e.g., frequent uphill climbs, heavy rider weight) can affect performance.
- バッテリーが完全に充電されていることを確認します。
4.3 エラーコード
If an error code appears on the display, consult the full user manual for specific code meanings and troubleshooting steps. Common codes may indicate motor, battery, or sensor issues.
5. 仕様
| 特徴 | 仕様 |
|---|---|
| ブランド | レクイスマート |
| モデル名 | S11 |
| モーター出力 | 350W ブラシレスモーター |
| 最高速度 | 時速 15.5 マイル (25 km/h) |
| バッテリー容量 | 270Wh Lithium-ion |
| 最大距離範囲 | 12-17 Miles (depending on riding habits and terrain) |
| 充電時間 | 4.5時間 |
| タイヤの種類 | 8.5" Pneumatic Tires |
| ブレーキシステム | Dual Brake System (Electronic & Drum Brake) |
| 重量制限 | 220 ポンド |
| アイテム重量 | 29.32 ポンド |
| フレーム素材 | アルミニウム |
| 特集 | Foldable & Portable, Bright Headlight & Rear Light, Three Gear Modes |
Image: The LEQISMART S11 Electric Scooter with its core specifications highlighted.
6. 保証とサポート
6.1 保証情報
The LEQISMART S11 Electric Scooter comes with a 2-year manufacturer's limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the full user manual or contact customer support.
6.2 カスタマーサポート
For technical support, troubleshooting assistance, or warranty inquiries, please contact LEQISMART customer service. Contact information can typically be found in the full user manual or on the official LEQISMART webサイト。