PEDAL COMMANDER スロットルレスポンスコントローラー ユーザーマニュアル

導入

The PEDAL COMMANDER is an advanced throttle response controller designed to enhance your vehicle's driving experience by eliminating throttle lag. This compact device connects seamlessly to your car's gas pedal, offering effortless installation and immediate improvements in responsiveness. With 4 distinct modes and 36 fine-tunable presets, the Pedal Commander allows you to personalize your throttle response to match diverse driving preferences and conditions. It is engineered to provide a more responsive and engaging journey without affecting your vehicle's ECU or voiding its warranty.

Image: The Pedal Commander unit, its protective case, and packaging, showcasinコンパクトなデザインとブランディング。

箱の中身

Upon opening your PEDAL COMMANDER package, you will find the following components:

• Pedal Commander Unit
• ユーザーマニュアル
• ジップタイ
• 接着剤の取り付け
• ウェットワイプ
• Harness with OEM Plug
• ブラケット

主な特徴

• より速い加速: Tunes the delay from your electronic gas pedal, allowing your vehicle to accelerate faster and providing a noticeable difference in performance.
• 36 調整可能な設定: Equipped with 4 different modes (Eco, City, Sport, and Sport+), each offering an additional 36 adjustable settings for fine-tuning to your specific driving preferences.
• エコモード： Significantly slows throttle response to improve fuel efficiency, ideal for long trips or fuel conservation.
• 素早く簡単なインストール: A simple plug-and-play device that typically takes about 10 minutes to install.
• Bluetooth互換： Control the unit conveniently using the free Pedal Commander mobile application.
• Will Not Void Your Warranty: The Pedal Commander does not interfere with your vehicle's ECU and will not void your manufacturer's warranty.

Image: Visual representation of key features: no throttle lag, easy plug-and-play installation, full customization, improved fuel economy, and mobile app control.

セットアップとインストール

The Pedal Commander is designed for a straightforward, plug-and-play installation that requires no special tools. Follow these steps for proper setup:

1. ステップ1: Turn off the vehicle ignition completely.
2. ステップ2: Keep the key fob at least 35 feet away from the vehicle.
3. ステップ3: Leave the driver's door open and wait for 15 minutes to allow the vehicle's ECU to shut down completely. This is crucial for proper installation.
4. ステップ4: Locate and disconnect the accelerator pedal plug. This is typically found above the accelerator pedal.
5. ステップ5: Connect the Pedal Commander harness to both the accelerator pedal and the vehicle's wiring until you hear a distinct "click" sound, confirming a secure connection.
6. ステップ6: Tuck the cables neatly to prevent interference with pedal operation.
7. ステップ7: Mount the Pedal Commander unit using the included hook and loop bracket in a convenient location within the cabin.

Confirm a secure connection by hearing a "click" sound while plugging in the harness. Following these instructions carefully will help avoid potential issues.

Image: A user demonstrating the simple plug-and-play installation of the Pedal Commander unit into the vehicle's accelerator gas pedal connection.

Image: A visual guide outlining the seven easy steps for installing the Pedal Commander, from turning off ignition to mounting the device.

インストール終了view ビデオ

ビデオ: このビデオでは、view of the Pedal Commander, demonstrating its compact size, the plug-and-play installation process, and how it connects to the vehicle's electronic throttle. It also briefly touches upon the mobile app control.

Operating the Pedal Commander

The Pedal Commander offers four main modes, each with 9 sub-levels (+4 to -4) for precise customization, totaling 36 adjustable settings. You can switch between modes using the buttons on the device or via the Bluetooth-enabled mobile app.

• 1.ECOモード

  Designed for fuel efficiency, ECO mode significantly slows down the throttle response. This is ideal for long highway drives, towing, or situations where maximum fuel economy is desired. It can help reduce fuel consumption by up to 20%.

• 2. CITY Mode

  Provides an active and responsive throttle feel, making it suitable for daily driving and urban traffic. It enhances vehicle responsiveness beyond factory settings, offering a smoother yet more immediate acceleration.

• 3. SPORT Mode

  Offers a heightened performance response, making your vehicle feel much more spirited. This mode is recommended for enthusiastic driving on public roads where increased acceleration and responsiveness are desired.

• 4. SPORT+ Mode

  This is the most extreme response mode, providing instant acceleration. It is primarily intended for off-road use or track driving where maximum throttle sensitivity is required. Use with caution due to its aggressive response.

Each mode can be further adjusted with 9 sub-levels (from -4 to +4) to fine-tune the throttle sensitivity to your exact preference. The mobile app provides a visual interface for easy adjustment and mode selection.

Image: An illustration of the Pedal Commander unit displaying its four modes (Eco, City, Sport, Sport+) and the adjustable levels for each, highlighting its customization capabilities.

Understanding Pedal Commander Modes Video

Video: This video features a representative explaining each of the four driving modes (Eco, City, Sport, Sport+) available on the Pedal Commander, detailing their intended use and benefits for different driving scenarios.

メンテナンス

The Pedal Commander is a low-maintenance device. Once installed, it generally requires no ongoing maintenance. Ensure the unit and its connections remain secure and free from debris. Periodically check the wiring to ensure it has not become loose or damaged. Keep the unit clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

トラブルシューティング

If you encounter any issues with your Pedal Commander, consider the following troubleshooting steps:

• No Power/Unit Not Lighting Up:
  • Ensure all connections are firmly seated and clicked into place.
  • Verify the vehicle's ignition is on (or in accessory mode, depending on vehicle).
  • Check for any visible damage to the cables or the unit itself.
• Incorrect Response/No Change in Throttle:
  • Confirm the unit is powered on and a mode is selected.
  • Ensure the Pedal Commander app is correctly paired via Bluetooth and the settings are being applied.
  • Disconnect and reconnect the unit, ensuring the 15-minute ECU reset procedure (Step 3 of installation) is followed.
• アプリの接続の問題:
  • モバイルデバイスでBluetoothが有効になっていることを確認します。
  • Restart the Pedal Commander app.
  • モバイルデバイスを再起動してみてください。
  • 問題が解決しない場合は、アプリの設定でデバイスのペアリングを解除してから再度ペアリングしてみてください。

これらの手順で問題が解決しない場合は、サポート セクションを参照してさらにサポートを受けてください。

仕様

免責事項

The Pedal Commander throttle response controller is intended to boost your vehicle’s performance, including its acceleration capabilities. Pedal Commander shall not be liable for any decisions made by the driver while operating any on or off-road vehicle. Please read the full description and this instruction manual before installing and operating the device.

保証とサポート

The Pedal Commander comes with a 2-year warranty. For any technical support, warranty claims, or further inquiries, please contact Pedal Commander customer service. You can find contact information on the official Pedal Commander webサイトまたは購入場所を通じてご購入いただけます。

追加のリソースとよくある質問については、 PEDAL COMMANDER Store on Amazon.