Autel MaxiVideo MV108S USB Endoscope Instruction Manual

1. はじめに

The Autel MaxiVideo MV108S USB Endoscope is a digital inspection camera designed to work with compatible Autel diagnostic tablets and personal computers. It allows users to inspect difficult-to-reach areas that are typically hidden from view. This device is capable of recording high-definition digital still images and videos, providing an efficient solution for inspecting machinery, facilities, and infrastructure.

Key features of the MV108S include:

• 高解像度イメージング: Equipped with a 2MP camera, offering 1920x1080 HD resolution for clear images and videos.
• 広い View 角度： Features an 81° view angle for broader inspection coverage.
• Extended Depth of Field: Provides a depth of field from 3cm to 8cm, allowing for detailed close-up inspections.
• IP67 Waterproof Imager Head: The 8.5mm small diameter imager head is IP67 rated, ensuring functionality in wet environments.
• 調整可能なLED照明: Integrated with 8 bright LED beads to ensure clear visibility in various lighting conditions.
• プラグアンドプレイ接続: Connects via USB to compatible Autel tablets or PCs without requiring internet or Bluetooth.

2. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• Autel MaxiVideo MV108S USB Endoscope
• ユーザーマニュアル
• Accessories: Mirror, Hook, Magnet

Image: Autel MV108S Endoscope and its three practical accessories.

3. セットアップと接続

Follow these steps to connect your Autel MaxiVideo MV108S Endoscope to a compatible device:

1. Connect Imager Head Cable: Connect the removable imager head cable to the host handgrip. Ensure the connection is secure by screwing the knurled knob firmly in place.
2. デバイスに接続します: Insert the USB cable from the handgrip into a USB port on your compatible Autel tablet scanner or PC.
3. アプリケーションを起動:
   • For Autel Tablet: After USB connection, tap the "Digital Inspection" app icon on your tablet. You can then select image or video modes.
   • PCの場合: The device should be recognized as a USB camera. You may need to open a camera application (e.g., Windows Camera app) and select the Autel camera as the input source.

Image: Connection steps for the MV108S to an Autel scanner and a PC.

4. 操作手順

Once connected, the MV108S allows for visual inspection in various environments:

• 一般検査: Carefully insert the imager head into the area you wish to inspect. The flexible cable allows navigation through confined spaces.
• 照明の調整: The integrated LED lights can be adjusted to provide optimal brightness for clear viewing in dark areas.
• キャプチャメディア: Use the connected Autel tablet or PC software to capture still images (JPEG) or record videos (MP4) of your inspection.
• Waterproof Applications: Due to its IP67 rating, the imager head can be submerged in water for inspecting pipes or other wet areas. Ensure the connection point to the handgrip remains dry.
• 自動車検査: The small diameter design is ideal for inspecting engine components, wiring harnesses, and other tight spaces within a vehicle.

Image: Wide application scenarios for the MV108S, demonstrating its use in automotive and industrial settings.

5. アクセサリの使用

The MV108S comes with three practical accessories to enhance its functionality:

• 鏡： Attaches to the imager head to provide a side view, useful for looking around corners or inspecting surfaces not directly in front of the camera.
• フック: Can be attached to retrieve small objects from inaccessible areas, such as dropped screws or wires.
• 磁石： Useful for picking up small ferrous metal objects that have fallen into tight spaces.

6. メンテナンス

To ensure the longevity and optimal performance of your MV108S Endoscope:

• クリーニング： After use, especially in dirty or wet environments, gently wipe the imager head and cable with a soft, damp 布。刺激の強い化学物質は避けてください。
• 乾燥: If the imager head has been submerged, ensure it is thoroughly dried before storage.
• ストレージ： Store the endoscope in a clean, dry place, away from extreme temperatures and direct sunlight. Coil the cable loosely to prevent damage.
• Connection Care: Always ensure the knurled knob is properly tightened when connecting the imager head cable to the handgrip to maintain a secure and waterproof seal for the imager head.

7。 トラブルシューティング

If you encounter issues with your MV108S Endoscope, consider the following:

• "Camera Not Found" Error:
  • Ensure the USB cable is securely plugged into both the endoscope handgrip and the host device (Autel tablet or PC).
  • デバイスの別の USB ポートを試してください。
  • Restart the application or your host device.
  • On a PC, check Device Manager to confirm the camera is recognized. You may need to select the Autel camera within your camera application settings.
• 画質が悪い:
  • Adjust the LED brightness using the controls on the handgrip or within the software.
  • Ensure the imager head lens is clean and free from debris.
  • Verify the object being inspected is within the optimal depth of field (3-8cm).
• 電源なし/LEDが点灯しない:
  • Confirm the USB connection is firm and the host device is powered on.
  • Test with a different USB port or host device if possible.

8. 仕様

The following table outlines the technical specifications of the Autel MaxiVideo MV108S USB Endoscope:

Image: Comparison of MV108S specifications with the previous MV108 model.

9. 保証とサポート

For warranty information, technical support, or service inquiries, please refer to the official Autel website or contact Autel customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.