EverBrite 充電式LEDヘッドライトamp モーションセンサー付き - ユーザーマニュアル

1.製品オーバーview

The EverBrite Rechargeable LED Headlamp is a versatile lighting device designed for various activities such as hiking, running, camping, and general tasks. It features multiple lighting modes, a motion sensor for hands-free operation, and a rechargeable battery.

Image 1.1: The EverBrite headlamp, illustrating its main features including the light, headband, USB charging cable, and motion sensor functionality.

2. パッケージ内容

• 1 x EverBrite Rechargeable LED Headlamp
• マイクロUSB充電ケーブル x 1
• 1 x Lithium Ion Battery (pre-installed)

3. 主な特徴

• 充電式バッテリー: Equipped with a 1200mAh lithium battery and Micro-USB charging.
• 9つの照明モード： Includes XPE, COB, XPE+COB, Red Beam, and SOS Red Strobe in key light mode, plus XPE, COB, XPE+COB, and Red Beam in motion sensor mode.
• モーションセンサー: 手をかざすだけでライトのオン/オフが可能なハンズフリー操作が可能です。
• 軽量で耐久性があります: Constructed from ABS hard rubber, weighing approximately 0.17 lbs (80g).
• 調節可能なヘッドバンド: Elastic headband fits head circumferences from 15.7" (40cm) to 31.5" (80cm).
• 調整可能な角度: ヘッドルamp can be tilted up to 45 degrees.
• 耐熱性: Operates effectively in temperatures from -4℉ (-20℃) to 140℉ (60℃).

4. セットアップ

4.1 ヘッドライトの充電amp

1. ヘッドライトのMicro-USB充電ポートを見つけますamp.
2. Connect the provided Micro-USB cable to the headlamp and the other end to a 5V 1A USB charger (not included), power bank, or computer USB socket.
3. The power indicator lights will show the charging status. One light flashing indicates charging, and four solid lights indicate a full charge.
4. ヘッドを抜くamp promptly after charging is complete to preserve battery life.

重要： Do not turn on the light while the headlamp 充電中です。

画像4.1: ヘッドのイラストamp's Micro-USB charging port and battery indicator lights, demonstrating connection to a power source.

4.2 ヘッドバンドの調整

1. ヘッドルを置きますamp あなたの頭の上に。
2. Adjust the elastic headband to a comfortable fit. The band is designed to adapt to various head sizes (15.7"-31.5" / 40-80cm).
3. ヘッドルを確認してくださいamp is secure but not too tight to avoid discomfort during prolonged use.

Image 4.2: The adjustable and breathable headband of the EverBrite headlamp, shown being worn by individuals.

5. 操作手順

5.1 電源のオン/オフとモードの選択（キーライトモード）

1. 電源ボタンを1回押してヘッドライトをオンにしますamp.
2. Within 5 seconds of turning on, press the power button repeatedly to cycle through the following modes: XPE Mode (300 Lm) > COB Mode (300 Lm) > XPE+COB Mode (500 Lm) > レッドビーム > SOSレッドストロボ.
3. If the light has been on for more than 5 seconds in any mode, a single press of the power button will turn the light off directly, without cycling through all modes.

図5.1: ヘッドの視覚的表現amp's various lighting modes and their respective lumen outputs.

5.2 モーションセンサーモード

1. To activate motion sensor mode, press the dedicated motion sensor button (usually indicated by a wave icon or distinct from the main power button). A red indicator light will illuminate.
2. Once activated, wave your hand within approximately 15 cm (6 inches) of the sensor to turn the light ON or OFF.
3. In motion sensor mode, you can cycle through XPE, コブ, XPE+COB、 そして レッドビーム by pressing the main power button.
4. モーションセンサーモードを終了するには、モーションセンサーボタンをもう一度押します。

Image 5.2: Demonstration of the motion sensor feature, showing how to activate it and use hand gestures to control the light.

5.3 角度調整

ヘッドルamp unit can be tilted up to 45 degrees to direct the light precisely where needed. Gently push or pull the light housing to adjust its angle.

画像5.3: ヘッドamp's adjustable angle mechanism, allowing users to direct the light beam.

6. メンテナンス

6.1 クリーニング

• ヘッドを拭くamp 柔らかく、dのボディamp 布で拭いてください。研磨剤や溶剤は使用しないでください。
• The headband is removable for easy washing. Hand wash with mild soap and water, then air dry completely before reattaching.

6.2 ストレージ

• ヘッドルを保管するamp 直射日光を避け、涼しく乾燥した場所に保管してください。
• For long-term storage, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.

7。 トラブルシューティング

• ヘッドルamp オンにならない：
  - Ensure the battery is charged. Connect to a power source and check the charging indicator lights.
  - Verify the power button is pressed correctly.
• 短いバッテリー寿命：
  - Ensure the headlamp is fully charged before use. Charging time is typically 2-3 hours.
  - Battery performance can decrease over time with repeated charge cycles.
• 光のちらつき:
  - This could indicate a low battery. Recharge the headlamp.
  - If flickering persists after charging, contact customer support.
• モーションセンサーが応答しません:
  - Ensure motion sensor mode is activated (red indicator light is on).
  - Wave your hand within the optimal sensing distance (approx. 15 cm).
  - Clean the sensor area to remove any obstructions.

8. 仕様

9. 保証とサポート

9.1 保証情報

This EverBrite headlamp 付属 2年間保証 ご購入日から1年間有効です。本保証は、通常の使用における製造上の欠陥および仕上がりの品質を保証するものであり、誤用、事故、不正な改造、または通常の摩耗や損耗による損傷は保証の対象外となります。

9.2 カスタマーサポート

For technical assistance, warranty claims, or any questions regarding your EverBrite headlamp, please contact our customer support team:

• メールアドレス: support@everbrite.com (Example）
• 電話： 1-800-XXX-XXXX (例:ample）
• Webサイト： Visit the EverBrite Store on Amazon

Please have your model number (E021047AU) and proof of purchase ready when contacting support.