ATTOP W10 Camera Drone Battery Instruction Manual

1. はじめに

This instruction manual provides essential information for the safe and effective use of your ATTOP W10 Camera Drone Battery. Please read this manual thoroughly before using the battery to ensure proper operation, extend battery life, and prevent damage or injury. Keep this manual for future reference.

2. 安全情報

Always prioritize safety when handling and using batteries. Failure to follow these guidelines may result in fire, personal injury, or property damage.

• 充電： Use only the original or manufacturer-approved charger designed for the ATTOP W10 drone battery. Do not charge unattended.
• ストレージ： Store the battery in a cool, dry place away from direct sunlight, heat sources, and flammable materials. Keep out of reach of children and pets.
• 取り扱い： Do not puncture, impact, or disassemble the battery. Avoid exposing the battery to water or extreme temperatures.
• 廃棄： 使用済みの電池は、地域の条例に従って責任を持って廃棄してください。家庭ごみとして廃棄しないでください。
• ダメージ： If the battery appears damaged, swollen, or leaks, discontinue use immediately and dispose of it safely.

3. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• 1 x ATTOP W10 Camera Drone Battery

4.製品オーバーview

The ATTOP W10 Camera Drone Battery is a rechargeable power source specifically designed for the ATTOP W10 camera drone. It provides the necessary power for drone flight and camera operation. This battery is compact and lightweight, ensuring optimal performance for your drone.

Image showing the ATTOP W10 Camera Drone Battery, a rectangular black battery with a connector.

5. セットアップ

5.1 バッテリーの充電

1. Connect the battery to the designated charging cable provided with your ATTOP W10 drone.
2. Plug the charging cable into a suitable USB power adapter (e.g., 5V/1A) or a USB port on a computer.
3. Observe the charging indicator on the charger or drone (refer to your drone's manual for specific indicator behavior).
4. Once fully charged, disconnect the battery from the charger. Avoid overcharging.

5.2 バッテリーの取り付け

1. Ensure the ATTOP W10 drone is powered off before installation.
2. Locate the battery compartment on your ATTOP W10 drone (refer to your drone's manual for exact location).
3. Carefully insert the battery into the compartment, ensuring the connectors align correctly.
4. Secure the battery in place and close the battery compartment cover.

6. 操作手順

Once the battery is charged and installed, you can power on your ATTOP W10 drone according to its specific operating instructions. The battery provides power for flight and camera functions. Monitor the drone's battery indicator during operation to avoid sudden power loss during flight.

7. メンテナンス

7.1バッテリーケア

• 通常充電: 使用する前に毎回バッテリーを完全に充電してください。
• 長期保存庫： If storing the battery for an extended period, charge it to approximately 50-60% capacity. Recharge every 3 months to prevent deep discharge.
• クリーニング： バッテリーの接点を清潔に保ち、ほこりやゴミが付かないようにしてください。清掃には乾いた柔らかい布をご使用ください。
• 温度： Avoid operating or storing the battery in extreme hot or cold conditions, as this can degrade performance and lifespan.

8。 トラブルシューティング

If you encounter issues with your ATTOP W10 Camera Drone Battery, consider the following:

• バッテリーが充電されていません: Ensure the charging cable and adapter are functioning correctly. Check for proper connection between the battery and charger.
• 短い飛行時間: This could indicate an aging battery or improper charging. Ensure the battery is fully charged before use. If the issue persists, the battery may need replacement.
• ドローンの電源が入らない: Verify the battery is correctly installed and fully charged. Check the drone's power button and connections.

For further assistance, refer to your ATTOP W10 drone's main instruction manual or contact ATTOP customer support.

9. 仕様

10. 保証とサポート

For warranty information and customer support regarding your ATTOP W10 Camera Drone Battery, please refer to the documentation included with your ATTOP W10 drone or visit the official ATTOP webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

ATTOP Official Webサイト： Visit the ATTOP Store on Amazon