導入
This instruction manual provides essential information for the safe and efficient use of your tectake Electric Height Adjustable Desk Stand, Model 404315. This versatile desk stand is designed to offer a smooth transition between sitting and standing positions, promoting a healthier work environment. It features a sturdy metal frame, an electric height adjustment mechanism, and an intelligent anti-collision system for enhanced safety.
Please read this manual thoroughly before assembly and operation to ensure proper installation and to maximize the lifespan of your product.
安全上の警告
これらの安全指示に従わなかった場合、怪我をしたり製品が損傷する可能性があります。
- Ensure the desk stand is properly assembled according to the provided instructions.
- Do not exceed the maximum weight limit of 100 kg (220 lbs) on the desk stand.
- Exercise caution with sharp edges during assembly and handling.
- Properly adjust the height-adjustable plastic feet to ensure the desk's stability on uneven surfaces.
- Avoid touching electrical components or motors during operation.
- Ensure the desktop is firmly grounded to prevent electrical hazards.
- 高さ調整中は、子供やペットをデスクから遠ざけてください。
パッケージ内容
組み立てを始める前に、すべての部品が揃っていることを確認してください。部品が不足または破損している場合は、カスタマーサポートまでご連絡ください。
- Electric Height Adjustable Desk Stand Frame
- Mounting Material (screws, tools, etc.)
- 組み立て手順
Note: A tabletop is not included with this desk stand and must be purchased separately.
セットアップと組み立て
Follow the detailed assembly instructions provided in the package. The general steps are outlined below:
- コンポーネントを解凍します: すべての部品をパッケージから慎重に取り出し、傷がつかないように清潔で柔らかい表面の上に広げます。
- フレームを組み立てる: Connect the lifting columns, crossbars, and feet according to the assembly manual. Ensure all screws are tightened securely.
- テーブルトップを取り付ける: Place your chosen tabletop onto the assembled frame. Secure the tabletop to the frame using the provided mounting hardware. Ensure the tabletop is centered and stable.
- 接続電源： Plug the power cable into the control box, and then plug the control box into a standard electrical outlet. Ensure the cable is routed safely to avoid tripping hazards.
- 足の調整: Level the desk by adjusting the plastic feet at the bottom of the stand. This ensures stability and prevents wobbling.
Image: An assembled tectake electric height adjustable desk stand in grey, ready for use. This image illustrates the sturdy metal frame and the overall structure of the product.
操作手順
Your tectake Electric Height Adjustable Desk Stand is designed for intuitive operation.
- 高さ調整: Use the control panel (usually located on the front edge of the tabletop) to raise or lower the desk. Typically, there are 'Up' and 'Down' buttons. Press and hold the desired button until the desk reaches your preferred height. The electric motor operates quietly and smoothly.
- 衝突防止システム: The desk stand is equipped with an intelligent anti-collision system. If the desk encounters an obstacle (e.g., a chair, cabinet, or wall) during height adjustment, the motor will automatically stop and slightly reverse direction to prevent damage.
- Memory Presets (if applicable): Some models may include memory preset buttons. Refer to your specific control panel instructions for programming and using these presets to save your favorite sitting and standing heights.
Regularly changing between sitting and standing positions can help reduce strain and improve comfort during long working hours.
メンテナンス
Proper maintenance ensures the longevity and optimal performance of your desk stand.
- クリーニング： Wipe the metal frame and tabletop (if applicable) with a soft, damp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤の使用は避けてください。
- 接続を確認してください: すべてのネジとボルトがしっかりと締まっているか定期的に点検してください。必要に応じて締め直してください。
- ケーブル管理 Ensure all power cables are neatly organized and not pinched or strained.
- 重量制限： Always adhere to the maximum load capacity of 100 kg. Overloading can damage the motor and frame.
トラブルシューティング
If you encounter any issues with your desk stand, refer to the following common solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 机は動きません。 | Power cable disconnected, motor overload, control panel issue. | Check power connections. Unplug and replug the power cord. Reduce load if overloaded. Contact support if problem persists. |
| 衝突防止システムが頻繁に作動します。 | 障害物、敏感な設定。 | Ensure no objects are in the path of the desk. Refer to control panel manual for sensitivity adjustment (if available). |
| 動作中に異常な音がする。 | 緩んだコンポーネント、モーターの問題。 | Check all screws and bolts for tightness. Ensure the desk is level. If noise persists, contact customer support. |
| 机がぐらつきます。 | 床が平らでない、接続が緩い。 | Adjust the leveling feet at the bottom of the stand. Ensure all frame connections are tight. |
仕様
Key technical details for the tectake Electric Height Adjustable Desk Stand, Model 404315:
- モデル番号: 404315
- Maximum Total Dimensions (WxDxH): 約168×60×125cm
- Minimum Total Dimensions (WxDxH): 約110×60×60cm
- Suitable for Table Tops (WxD): Approximately 120 x 60 cm to 180 x 80 cm
- Lifting Columns per Side: 3
- Main Column (WxD): 約5 x 8 cm
- Table Top Support (WxD): 約3 x 58 cm
- Adjustable Area of Plastic Feet: 約1.2cm
- Sound from Electric Motors: <50dB
- 持ち上げ速度: 25mm/秒
- Power per Motor: 52.2ワット
- 入力ボリュームtage: 100-240V
- ケーブル長さ: 約150cm
- 耐荷重: 100キロ
- 重さ： 約23kg
- 材料： Powder-coated steel, ABS plastic
保証とサポート
For warranty information, please refer to the documentation included with your purchase or visit the official tectake website. If you require technical assistance, have questions about assembly, or need to report a missing/damaged part, please contact tectake customer support directly. Contact details can typically be found on the manufacturer's webサイトまたは購入書類に記載されています。
サポートにお問い合わせの際は、モデル番号 (404315) と購入日をご用意ください。