JAMARA AX8 Lipo Battery User Manual

導入

This manual provides essential information for the safe and effective use of your JAMARA AX8 Lipo Battery. This lithium-polymer battery is designed to deliver high energy content with low self-discharge, making it suitable for various model applications such as quadcopters, drones, helicopters, and model cars. Please read these instructions carefully before use to ensure optimal performance and longevity of your battery.

安全情報

Warning: This product is not a toy.

リチウムポリマー（LiPo）バッテリーは慎重な取り扱いが必要です。安全ガイドラインに従わないと、火災、人身傷害、または物的損害につながる可能性があります。

• Do not puncture, drop, short-circuit, or disassemble the battery.
• バッテリーを極端な温度、直射日光、湿気にさらさないでください。
• Always use a LiPo-compatible charger and follow its instructions.
• 充電中のバッテリーを放置しないでください。
• 電池は可燃物から離れた涼しく乾燥した場所に保管してください。
• 電池が膨張したり、液漏れしたり、損傷の兆候が見られる場合は、直ちに使用を中止し、適切に廃棄してください。

パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• 1 x JAMARA AX8 Lipo Battery (3.7V, 300mAh)

設定

The JAMARA AX8 Lipo Battery is designed for quick integration into compatible models.

1. 初期費用： Before first use, fully charge the battery using a compatible LiPo charger. Refer to your charger's manual for specific charging procedures.
2. Connecting to Model: Carefully align the battery connector with the corresponding port on your model (e.g., quadcopter, drone). Ensure a secure connection. Do not force the connector.

Image: Close-up of the battery's connector. This white two-pin connector ensures a secure and reliable power supply to your model.

Image: The JAMARA AX8 Lipo battery with indicated dimensions. The battery measures approximately 3.5 cm in length, 2 cm in width, and 0.8 cm in height, making it compact for various model applications.

手術

Once the battery is charged and securely connected to your model, you can begin operation.

• Ensure your model's power switch is in the OFF position before connecting the battery.
• After connecting the battery, turn on your model's power switch.
• Monitor battery performance during use. If you notice a significant drop in power or performance, it indicates the battery is nearing depletion.
• Avoid completely discharging the battery, as this can damage LiPo cells. The integrated Battery Management System (BMS) helps protect against deep discharge.
• Disconnect the battery from the model after each use.

メンテナンス

適切なメンテナンスを行うと、LiPo バッテリーの寿命とパフォーマンスが向上します。

• 充電： Always use a charger specifically designed for LiPo batteries. Follow the charger's instructions for correct voltage と現在の設定。
• ストレージ： For long-term storage, charge the battery to a 'storage voltage' (typically around 3.8V per cell). Store in a cool, dry place, ideally in a fire-resistant LiPo bag.
• 検査： Regularly inspect the battery for any signs of damage, swelling, or connector wear. Do not use a damaged battery.
• 廃棄： Dispose of old or damaged LiPo batteries responsibly according to local regulations. Never throw them in household waste.

トラブルシューティング

If you encounter issues with your JAMARA AX8 Lipo Battery, consider the following:

• バッテリーが充電されない:
  • Ensure the charger is properly connected and functioning.
  • Verify the battery connector is clean and securely attached to the charger.
  • Check if the charger settings are correct for a 3.7V LiPo battery.
• Low power or short run time:
  • 使用する前にバッテリーが完全に充電されていることを確認してください。
  • The battery may be old or degraded. LiPo batteries have a finite number of charge cycles.
  • Check for any damage to the battery or its connectors.
• バッテリーの膨張:
  • Immediately discontinue use. Swelling indicates internal damage and a potential safety hazard.
  • Dispose of the battery safely according to local regulations.

仕様

保証とサポート

For warranty information and technical support, please refer to the documentation provided with your original purchase or visit the official Jamara webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。