tectake Bar Table with 4 Stools - Industrial Style

導入

Thank you for choosing the tectake Industrial Style Bar Table with 4 Stools. This manual provides important information for the safe assembly, operation, and maintenance of your new furniture set. Please read these instructions carefully before assembly and keep them for future reference.

安全に関する注意事項

• 組み立て前に、すべての部品が揃っていて損傷がないことを確認してください。部品が不足または損傷している場合は使用しないでください。
• 傷がつかないように、柔らかく清潔な表面の上で製品を組み立ててください。
• すべてのネジとボルトをしっかりと締めますが、素材を損傷しないように締めすぎないようにしてください。
• すべての接続がしっかりと固定されているかどうかを定期的に確認してください。
• Do not exceed the maximum load capacity for the table (75 kg) and stools (150 kg per stool).
• 窒息の危険を防ぐため、小さな部品や梱包材はお子様の手の届かない場所に保管してください。
• This product is designed for indoor use. Avoid prolonged exposure to moisture or direct sunlight.

パッケージ内容

Before starting assembly, please verify that all the following components are included in your package:

• バーテーブル×1
• 4 x Bar Stools
• 1 x Set of Assembly Hardware (screws, bolts, Allen key, etc.)
• 組み立てマニュアル（本書）1冊

Image: Detailed diagram of product dimensions and included components.

組み立て手順

Follow these steps carefully to assemble your tectake bar table and stools. It is recommended to have two people for assembly.

1. コンポーネントを解凍します: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to avoid scratches. Identify each component using the parts list in the assembly hardware set.
2. テーブルフレームの組み立て: Attach the table legs to the long and short crossbars using the provided screws and Allen key. Ensure all connections are finger-tight before fully tightening.
3. テーブルトップを取り付ける: Place the tabletop upside down on a soft surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Assemble Stool Frames: For each stool, attach the four legs to the seat frame using the provided screws. Ensure the footrests are correctly oriented.
5. Attach Stool Seats: Place each stool seat upside down. Align the assembled stool frame with the pre-drilled holes on the underside of the seat. Secure the seat to the frame.
6. 調整可能な脚を取り付ける: Screw the adjustable plastic feet into the bottom of each table leg and stool leg. These feet protect your floor and allow for minor height adjustments to ensure stability.
7. 最終締め付け: Once all components are assembled, carefully place the table and stools upright. Systematically tighten all screws and bolts using the Allen key. Do not overtighten.

Image: Stable feet with screw-in adjusters and resistant MDF tabletops.

Image: Features including adjustable feet and space-saving stool storage.

操作手順

The tectake bar table and stools are designed for daily use in your home. Here are some guidelines for optimal use:

• 安定性： Use the adjustable plastic feet on both the table and stools to compensate for uneven floors. Turn the feet clockwise or counter-clockwise until the furniture is stable and does not wobble.
• 省スペース: The stools are designed to fit neatly under the table when not in use, maximizing your floor space.
• 耐荷重: Do not place items heavier than 75 kg on the table. Each stool can support a maximum weight of 150 kg.
• 配置: Position the furniture on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for extended periods to prevent material damage.

Image: tectake bar table and stools in use.

メンテナンス

Proper care will extend the life and appearance of your tectake furniture set:

• クリーニング： Wipe surfaces with a dry cloth. For more stubborn marks, use a slightly damp cloth and mild detergent, then dry immediately with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
• 定期点検: すべてのネジとボルトがしっかりと締まっているか定期的に点検してください。必要に応じて締め直してください。
• 保護： コースターやプレースマットを使用して、テーブルトップをこぼれ、熱、傷から保護します。
• 環境： Keep the furniture in a dry environment. Avoid extreme temperature changes and high humidity.

トラブルシューティング

If you encounter any issues with your tectake bar table and stools, please refer to the following common solutions:

• Wobbling Table/Stool:
  • Check if all screws and bolts are securely tightened.
  • Adjust the plastic feet on the bottom of the legs to level the furniture on uneven surfaces.
• 組み立て時の難しさ:
  • Ensure you are using the correct hardware for each step as indicated in the assembly instructions.
  • Do not overtighten screws until all parts are loosely fitted, then tighten them gradually.
  • Refer to the assembly diagrams for correct orientation of parts.
• 傷やへこみ:
  • Minor scratches on the MDF surface can sometimes be minimized with furniture polish or a touch-up pen matching the wood finish.
  • Prevent future damage by using protective pads under items placed on the table.

仕様

保証とサポート

tectake products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or any questions regarding your product, please contact tectake customer service through their official website or the retailer where you purchased the product. Please have your model number (404306) and purchase date ready when contacting support.

You can visit the tectake store for more information: tectake Official Store