1. はじめに
This manual provides essential information for the safe and efficient operation of your EPEVER IP3000-22 Plus Pure Sine Wave Inverter. The IPower-Plus series is designed to convert 24V DC battery power to 230V AC pure sine wave power, making it ideal for off-grid home emergency lighting, vehicle-mounted systems, and other applications requiring stable AC power. It features an LCD display, USB output, and advanced protection functions.
2. 安全情報
- インストールと操作の前に、すべての指示を注意深くお読みください。
- 過熱を防ぐために、インバーターの周囲に適切な換気を確保してください。
- インバータを水、雨、または過度の湿気にさらさないでください。
- Connect the inverter only to a 24V DC battery system. Incorrect voltag損傷を引き起こす可能性があります。
- Always observe correct polarity when connecting battery cables (positive to positive, negative to negative).
- 出力端子の短絡を避けてください。
- インバータをご自身で開けたり修理したりしないでください。資格のあるサービス担当者にご相談ください。
- インバーターおよびその接続部に子供を近づけないでください。
3.製品オーバーview
The EPEVER IP3000-22 Plus Inverter is part of the IPower-Plus series, featuring a 180-degree rotatable LCD display for easy monitoring and compatibility with lithium batteries. It includes a USB port and surge current suppression on the input side (for 48V models without USB), protecting lithium battery cells and BMS from damage. The inverter is designed for low no-load or standby losses.
Figure 3.1: EPEVER IP3000-22 Plus Pure Sine Wave Inverter, main view.
図3.2：側面 view of the inverter, highlighting the dual cooling fans for efficient heat dissipation.
Figure 3.3: Front panel of the inverter, featuring the DC input terminals for battery connection.
Figure 3.4: Rear panel of the inverter, showing the AC output socket, ON/OFF switch, RS-485 communication port, and USB output.
4. セットアップ
4.1 初期接続
- インバータのオン/オフスイッチが「オフ」の位置にあることを確認します。
- Connect the DC input cables to your 24V DC battery system. Ensure correct polarity: red cable to positive (+), black cable to negative (-). Secure connections tightly.
- Connect your AC loads to the AC output socket on the inverter.
- If using the RS485 communication interface for remote monitoring, connect the appropriate cable to the RS485 port.
4.2リモコンのペアリング
The inverter supports remote control for convenient operation. Follow these steps to pair your remote control:
- Remove the plastic separator from the remote control's battery compartment.
- Press and hold the inverter's power button for three seconds until the red indicator light illuminates. Release the button.
- Immediately press the 'ON' button on the remote control to complete the pairing process. If the red light flashes, pairing was unsuccessful; repeat the steps.
Video 4.1: This video demonstrates the pairing process for the inverter's remote control, showing how to activate the inverter's pairing mode and then use the remote to establish a connection.
5. 操作手順
5.1 電源のオン/オフ
- To power on the inverter, switch the ON/OFF button to the 'ON' position. The LCD display will illuminate, showing system status.
- To power off the inverter, switch the ON/OFF button to the 'OFF' position.
- Alternatively, use the paired remote control to switch the inverter ON or OFF.
5.2 LCDディスプレイの使用
The LCD display provides real-time information about the inverter's operation, including battery voltage、出力ボリュームtage, power consumption, and error codes. The display can be rotated 180 degrees for optimal viewing。
5.3 USB出力
The inverter features a 5VDC/Max.1A USB output, suitable for charging small electronic devices such as smartphones and tablets.
Video 5.1: This video demonstrates the EPEVER Pure Sine Wave Inverter in operation, showcasing its ability to power various household appliances and electronic devices, including a fan, TV, hairbrush, blender, and charging a smartphone.
6. メンテナンス
- Regularly inspect all cable connections to ensure they are secure and free from corrosion.
- Keep the inverter's cooling vents clear of dust and debris to maintain proper airflow.
- インバーターの外側は、乾いた柔らかい布で拭いてください。液体洗剤は使用しないでください。
- 定期的にバッテリーの容量を確認してくださいtage to ensure it remains within the recommended operating range.
7。 トラブルシューティング
The EPEVER IP3000-22 Plus Inverter is equipped with comprehensive protection features to ensure safe operation. If the inverter is not functioning as expected, check the following:
- 出力電力なし: Check if the inverter is switched ON. Verify battery connections and ensure the battery voltage is within the operating range (24V DC system).
- 過負荷保護: If the inverter shuts down due to an overload, reduce the connected load and restart the inverter. The continuous power is 3000W, with a surge power of 6000W (for 5 seconds).
- 短絡保護: Disconnect all loads and check for any short circuits in the wiring or connected appliances.
- オーバーボルtage/低ボラティリティtag保護: バッテリー容量を確認してくださいtage is stable and within the specified range for a 24V system.
- 過熱保護: Ensure adequate ventilation around the inverter. Clear any obstructions from the cooling fans.
- 逆極性保護： Double-check battery connections for correct polarity.
これらの点を確認しても問題が解決しない場合は、カスタマー サポートにお問い合わせください。
8. 仕様
| 特徴 | 仕様 |
|---|---|
| システムバッテリー容量tage | 24V直流 |
| 継続的な電力 | 3000W |
| Surge Power (5s) | 6000W |
| 出力周波数 | 50 / 60Hz±0.2％ |
| 最大効率 | >94% (30% 負荷) |
| 無負荷電流 | <1.0A |
| USB出力 | DC5V/Max.1A |
| RS485インターフェース | 5VDC / 200mA |
| 保護等級 | IP20 |
| ユニット寸法 | 521 × 274 × 148mm |
| 正味重量 | 8kg |
| 入力ボリュームtage | 230ボルト |
| 出力巻tage | 230巻tage（AC） |
| Electrical Wave Shape | 純粋な正弦波 |
| 表示タイプ | 液晶 |
| 認定資格 | CE、RoHS |
9. 保証とサポート
The EPEVER IP3000-22 Plus Inverter comes with a 2-year manufacturer's limited warranty. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly. The isolated RS485 communication interface allows for easy remote monitoring, management, and adjustment via PC software or a mobile phone application, providing additional support capabilities.