Flyrivergo ジュエリーポリッシャーベンチバッファー ユーザーマニュアル

導入

This manual provides essential information for the safe and efficient operation of your Flyrivergo Jewelry Polisher Bench Buffer. Please read this manual thoroughly before initial use and retain it for future reference. This versatile machine is designed for polishing and buffing various materials such as jewelry, wood, silver, metal, and jade, offering adjustable speed for optimal results.

安全情報

Always prioritize safety when operating power tools. Failure to follow these instructions may result in injury or damage to the product.

• 個人用保護具を着用してください: Always wear appropriate eye protection (safety glasses or goggles) and hand protection (gloves) when operating the polisher.
• マシンを固定する: Ensure the bench buffer is securely mounted to a workbench or a stable surface before operation to prevent movement and vibration. The base has four rubber feet for stability, and it can also be nailed down.
• Use Correct Wheels and Compounds: Always use the correct type of polishing wheel and compound suitable for the material you are working on.
• Maintain Clear Workspace: 作業エリアを清潔で明るい状態に保ちます。 雑然とした場所や暗い場所は事故を招きます。
• 過負荷を避ける: Do not apply excessive pressure to the polishing wheels, as this can cause the motor to stall or overheat.
• 使用しないときはプラグを抜いてください: Always unplug the machine from the power outlet before changing accessories, performing maintenance, or when not in use.
• 水に近づけないでください: Do not expose the machine to rain or operate it in damp または湿気の多い場所。
• 使用前に点検してください: Before each use, inspect the machine and accessories for any damage. Do not operate if damaged.

パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

• Flyrivergo Bench Buffer Polisher Unit
• 2 x Cotton Polishing Wheels
• 2 x Abrasive Fiber Wheels
• Hex Key Wrench (for setup)
• ユーザーマニュアル（このドキュメント）

Image: Bench Buffer Polisher and its components as packaged.

設定

Setting up your bench buffer is quick and easy:

1. 開梱： パッケージからすべてのコンポーネントを慎重に取り出します。
2. 位置： Place the bench buffer on a stable, flat workbench. The unit's base features four rubber taps to prevent movement. For enhanced stability, the base can be secured to your workbench using screws (not included) through the designated holes.
3. ホイールを取り付ける: Select the appropriate polishing wheel (cotton or fiber) for your task. Slide the wheel onto the spindle. Use the provided hex key wrench to tighten the wheel securely onto the spindle. Ensure the wheel is centered and firmly attached to prevent wobbling during operation.
4. Distinguish Spindles: Note that there are left and right spindles. Ensure you attach the wheels correctly to their respective spindles for proper operation.

Image: Attaching a polishing wheel using the hex key wrench.

画像: Examples of cloth wheels for jewelry and fiber wheels for metal parts.

操作手順

Follow these steps for effective polishing and buffing:

1. 電源オン: Plug the machine into a standard 110V AC power outlet. Flip the power switch to the "ON" position.
2. 速度を調整: The polisher features an adjustable speed control knob, allowing you to set the RPM between 2000 and 10000. Turn the knob to select the desired speed. Lower speeds are suitable for delicate items, while higher speeds are effective for more robust materials and efficient work.
3. コンパウンドを塗布する: Lightly touch the polishing compound (not included) to the spinning wheel to transfer the compound onto the wheel.
4. 研磨開始: Gently bring the item you wish to polish into contact with the spinning wheel. Apply light, consistent pressure. Move the item across the wheel to ensure even polishing.
5. 結果を観察する: Periodically inspect your workpiece to monitor progress and achieve the desired finish. Remember to use the correct polishing wheel and compound for optimal results.
6. 電源を切る： Once finished, turn the power switch to the "OFF" position and unplug the machine.

Image: Adjustable speed control dial (2000-10000 RPM).

画像: Example of polishing results on a ring (Before and After).

メンテナンス

Regular maintenance ensures the longevity and optimal performance of your polisher:

• クリーニング： After each use, wipe down the machine with a clean, dry cloth to remove any dust or polishing residue. Do not use harsh chemicals or abrasive cleaners.
• ホイールの交換: The buffing pads are easily replaceable. Replace worn or damaged wheels to maintain polishing efficiency.
• カーボンブラシ: The unit features carbon brush mounting ports. Periodically check and replace carbon brushes as needed to ensure consistent motor performance.
• ストレージ： Store the polisher in a clean, dry place away from direct sunlight and extreme temperatures.

トラブルシューティング

問題が発生した場合は、次の一般的な問題と解決策を参照してください。

• マシンの電源が入らない:
  • 電源コードが通電しているコンセントにしっかりと差し込まれているかどうかを確認してください。
  • 電源スイッチが「オン」の位置にあることを確認してください。
  • Verify the power outlet is functioning by testing it with another device.
• Excessive Vibration or Wobbling:
  • Ensure the polishing wheels are securely tightened on the spindles.
  • Check if the machine is placed on a stable and level surface.
  • Verify that the machine is securely mounted to the workbench if applicable.
  • Inspect wheels for damage or imbalance; replace if necessary.
• モーターの過熱:
  • ワークにかかる圧力を下げてください。
  • モーターの周囲に十分な換気を確保してください。
  • Allow the machine to cool down if it feels excessively hot.
• Poor Polishing Results:
  • Ensure you are using the correct type of polishing wheel and compound for the material.
  • Check if the wheels are worn out and need replacement.
  • Adjust the speed setting to match the material and desired finish.

これらの解決策を試しても問題が解決しない場合は、カスタマー サポートにお問い合わせください。

仕様

Image: Product dimensions for compact bench space.

保証とサポート

Your Flyrivergo Bench Buffer Polisher comes with a 1年間の保証 ご購入日から1年間有効です。この保証は製造上の欠陥をカバーし、通常の使用において製品に材料および製造上の欠陥がないことを保証します。

For technical guidance, warranty claims, or any questions regarding your product, please contact Flyrivergo customer support. We are committed to providing timely assistance and ensuring your satisfaction.

連絡先情報（例：ample - replace with actual if available):

• Webサイト： Visit the Flyrivergo Store on Amazon
• メールアドレス: support@flyrivergo.com (placeholder)
• 電話： 1-800-XXX-XXXX（プレースホルダー）