ACT Dual Hard Drive Docking Station

導入

The ACT AC1504 Dual Hard Drive Docking Station provides a convenient and efficient solution for connecting and accessing 2.5-inch and 3.5-inch SATA I/II/III hard drives and SSDs. This device supports high-speed data transfer via USB 3.0 (USB 3.2 Gen1) and features an offline cloning function, allowing you to duplicate drives without a computer connection. It is designed for data transfer, storage expansion, file backup, data recovery, system upgrades, and disk cloning.

パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認してください。

• ACT Dual Hard Drive Docking Station (AC1504)
• USB 3.0 タイプA - タイプB ケーブル
• 電源アダプター
• ユーザーマニュアル（このドキュメント）

Image: The ACT AC1504 Dual Hard Drive Docking Station, its power adapter, and the USB 3.0 cable, as included in the package.

製品の特徴

• デュアルベイ互換性: Supports all 2.5-inch and 3.5-inch SATA I/II/III HDDs and SSDs up to 12.5mm thickness.
• 高速USB 3.0: Utilizes USB 3.2 Gen1 technology for ultra-fast data transfer rates up to 5 Gbps.
• UASP サポート: Enhanced performance with USB Attached SCSI Protocol.
• オフラインクローン作成: Clone data from one hard drive to another without requiring a computer connection.
• 多用途: Ideal for data transfer, storage expansion, file backup, data recovery, system upgrades, and disk cloning.

設定

1. 接続電源： Plug the power adapter into the DC input port on the rear of the docking station. Connect the other end of the power adapter to a wall outlet.
2. ハードドライブを挿入します: Gently slide your 2.5-inch or 3.5-inch SATA HDD/SSD into the drive slots. Ensure the drives are fully seated. For offline cloning, the source drive should be in the 'Source' slot and the target drive in the 'Target' slot.
3. Connect to Computer (for data access): If you intend to use the docking station for data access via your computer, connect the USB 3.0 cable from the docking station's USB port to an available USB port on your computer.
4. 電源オン: Flip the ON/OFF switch on the rear of the docking station to the 'ON' position. The power indicator LED will illuminate.

Image: Rear panel of the docking station, illustrating the USB 3.0 port, ON/OFF power switch, and DC power input for connections.

Image: The docking station connected to a laptop via its USB cable, with two hard drives inserted, demonstrating a typical setup for data access.

操作手順

A. Data Access Mode (Connected to Computer)

1. ドッキング ステーションの電源がオンになっており、USB 3.0 ケーブルを介してコンピューターに接続されていることを確認します。
2. Insert one or two SATA HDDs/SSDs into the available slots.
3. オペレーティングシステムはドライブを自動的に検出し、リムーバブルストレージデバイスとして表示されます。
4. You can now access, transfer, and manage files on the inserted drives as you would with any other external storage.

B. Offline Cloning Function

The offline cloning function allows you to duplicate a source drive to a target drive without a computer connection.

1. ドライブの準備: Ensure both the source drive (the drive you want to copy FROM) and the target drive (the drive you want to copy TO) are SATA HDDs/SSDs. The target drive must be equal to or larger in capacity than the source drive.
2. ドライブを挿入します: Insert the source drive into the 'Source' slot (HDD1) and the target drive into the 'Target' slot (HDD2).
3. PCから切断: Ensure the docking station is NOT connected to any computer via USB.
4. 電源オン: オン/オフスイッチを使用してドッキング ステーションの電源をオンにします。
5. クローンの開始: Press and hold the 'Clone' button for approximately 3-5 seconds until the cloning progress LEDs (25%, 50%, 75%, 100%) begin to flash.
6. クローンの確認: Release the button, then quickly press it again to confirm the cloning process. The cloning process will begin, indicated by the progress LEDs lighting up sequentially.
7. 進捗状況を監視する: The LEDs will indicate the cloning progress (25%, 50%, 75%, 100%). All LEDs will remain solid when the cloning process is complete.
8. 電源を切る： Once cloning is complete, turn off the docking station and safely remove the drives.

重要： All data on the target drive will be erased during the cloning process. Back up any important data from the target drive before initiating cloning.

Image: The ACT AC1504 Dual Hard Drive Docking Station with two hard drives inserted, illustrating its dual-bay design and the LED indicators for power, activity, and cloning progress.

メンテナンス

• ドッキングステーションは清潔に保ち、ほこりを取り除いてください。清掃には柔らかく乾いた布を使用してください。
• デバイスを極端な温度、湿度、または直射日光にさらさないでください。
• ご自身でデバイスの分解や修理を試みないでください。資格のあるサービス担当者にご相談ください。
• Always power off the docking station before inserting or removing drives, especially during data transfer, to prevent data corruption.

トラブルシューティング

• ドライブが検出されません:
  • Ensure the docking station is powered on and the drive is properly seated in the slot.
  • Verify the USB cable is securely connected to both the docking station and your computer.
  • コンピューターの別のUSBポートに接続してみてください。
  • コンピュータのディスク管理 (Windows) またはディスク ユーティリティ (macOS) で、ドライブが初期化されフォーマットされているかどうかを確認します。
• データ転送が遅い:
  • コンピュータのUSB 3.0ポートに接続されていることを確認してください。USB 2.0ポートでは速度が遅くなります。
  • Verify that your operating system and drivers support USB 3.0 and UASP.
• オフラインクローン作成が失敗するか開始されない:
  • Ensure the docking station is NOT connected to a computer via USB during cloning.
  • ターゲット ドライブの容量がソース ドライブの容量以上であることを確認します。
  • Make sure both drives are properly inserted and detected by the docking station (power and activity LEDs should be on).
  • Follow the cloning steps precisely, especially the press-and-hold and quick-press sequence for the 'Clone' button.

仕様

保証とサポート

ACT provides reliable connectivity solutions. All ACT products comply with international standards and EU legislation. This product benefits from a factory warranty of 2 to 5 years.

For technical support or warranty claims, please refer to the official ACT webサイトをご覧いただくか、お近くの販売店にお問い合わせください。

Webサイト： www.act-connectivity.com