amFilm OneTouch スクリーンプロテクター ユーザーマニュアル

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your amFilm OneTouch Screen Protector for the Samsung Galaxy S22 5G 6.1 Inch. This product is designed to offer superior protection with an easy, bubble-free application process.

Figure 1: amFilm OneTouch Screen Protector Kit for Samsung Galaxy S22 6.1 Inch.

パッケージ内容

Your amFilm OneTouch Screen Protector package includes the following items:

• 2 x amFilm OneTouch Screen Protectors (pre-installed in auto-alignment tool)
• カメラレンズプロテクター x 2
• ウェットティッシュ2枚
• マイクロファイバークロス2枚
• 2 x Large Dust Removal Covers
• ホコリ取りステッカー2枚

図2：詳細 view パッケージに含まれるすべてのアイテム。

セットアップとインストール

The amFilm OneTouch Screen Protector features a patented auto-alignment tool for a quick and easy installation. Please follow these steps carefully for optimal results.

スクリーンプロテクターの取り付け

視覚的なガイドについては、公式のインストール ビデオをご覧ください。

1. 画面を掃除します。 Begin by thoroughly cleaning your phone screen using the provided wet wipe. Follow up with the microfiber cleaning cloth to remove any streaks or smudges. Ensure the screen is completely dry and free of dust.
2. ほこりを取り除く: Use the large dust removal cover or dust removal stickers to pick up any remaining dust particles from the screen. This step is crucial for a bubble-free application.
3. Prepare the Alignment Tool: The screen protector comes pre-installed in the auto-alignment tool. Locate the tab marked "TOP" and gently pull the tab downwards to remove the mask film from the screen protector. Ensure you pull downwards to avoid dislodging the screen protector from the tray.
4. 位置合わせして適用: Carefully place the auto-alignment tool over your Samsung Galaxy S22 6.1 inch phone. The tool is designed to perfectly align the screen protector with your device. Once aligned, press down gently on the circular cutout at the top for 2 seconds.
5. スムーズな塗布： Press the screen protector firmly on the "TOP" section of the alignment tool and slowly slide your finger over the entire length of the screen protector from top to bottom. You will see the adhesive spread across the screen automatically.
6. トレイを取り外す: Once the adhesive has fully spread, carefully remove the application tray from your phone. The blue film on the screen protector will come off with the tray, leaving the tempered glass perfectly applied.
7. 最終接着： If necessary, gently press along the edges of the screen protector to enhance adhesion to the phone's surface.

Figure 3: Visual steps for screen and camera lens protector installation.

Camera Lens Protector Installation

1. カメラレンズのクリーニング: Use a wet wipe and microfiber cloth to clean the camera lenses on the back of your phone.
2. ほこりを取り除く: Use a dust removal sticker to ensure no dust remains on the camera lenses.
3. Prepare Lens Protector: Bend the plastic sheet containing the camera lens protectors to carefully peel off one lens protector.
4. 位置合わせして適用: Align the camera lens protector precisely over your phone's camera lenses.
5. 確実な接着： Press firmly on the protector to help it adhere completely to the camera lens area.

操作手順

Fingerprint Sensor Functionality

After installing the screen protector, it is highly recommended to re-register your fingerprints for optimal performance of the in-display fingerprint sensor. This ensures accurate and responsive unlocking.

Figure 4: Guide to rescanning your fingerprint for improved sensor performance.

ケースの互換性

The amFilm OneTouch Screen Protector is designed to be case-friendly, meaning it is slightly smaller than the actual screen size to ensure compatibility with most phone cases without lifting or bubbling at the edges.

Figure 5: Illustration of the screen protector's case-friendly dimensions.

メンテナンス

To maintain the clarity and responsiveness of your amFilm screen protector, regularly wipe it with a clean, soft microfiber cloth. The oleophobic coating helps reduce fingerprints and smudges, but occasional cleaning will keep your screen pristine.

Avoid using harsh chemicals or abrasive materials, as these can damage the coating and the tempered glass.

トラブルシューティング

よくある問題と解決策

• 取り付け後の気泡： Small bubbles can sometimes appear immediately after installation. Most small bubbles will naturally disappear within 24-48 hours. For larger bubbles, gently lift the nearest corner of the screen protector and slowly push the bubble towards the edge using a microfiber cloth or a soft card. Re-adhere the lifted section carefully.
• Fingerprint Sensor Not Responsive: If your fingerprint sensor is not working correctly after installation, ensure you have re-registered your fingerprints. Navigate to your phone's settings (e.g., "Display" > "Touch sensitivity" or "Biometrics and security" > "Fingerprints") and delete existing fingerprints, then add new ones with the screen protector applied.
• Screen Protector Lifting at Edges: This can sometimes occur if the screen was not perfectly clean or if the phone case is too tight. Ensure the screen is free of dust and debris before installation. If using a case, verify it is not pushing against the edges of the screen protector. The amFilm protector is designed to be case-friendly, but some overly tight cases may still cause issues.

Figure 6: The 9H hardness tempered glass provides robust drop protection.

仕様

保証とサポート

amFilm offers a Lifetime Warranty for this product upon registration. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official amFilm webサイト。