Intel NUC 11 Pro NUC11TNHi7 Barebone System User Manual

1. はじめに

The Intel NUC 11 Pro NUC11TNHi7 is an ultra-compact barebone system designed for a wide range of applications, from business and education to home computing. This kit provides a customizable board and chassis, allowing users to select and install their preferred memory, storage, and operating system. Its small footprint and robust performance make it an ideal solution for space-constrained environments requiring powerful computing capabilities.

2. 安全情報

Please read all safety instructions carefully before setting up or using your Intel NUC system. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• 電気安全: Always disconnect the power adapter from the electrical outlet before performing any service or installation procedures. Use only the power adapter provided with your NUC or a compatible replacement.
• 換気： Ensure proper airflow around the NUC. Do not block ventilation openings. Operating the NUC in an enclosed space without adequate ventilation can lead to overheating.
• コンポーネントの処理: When installing or removing internal components (RAM, SSD), always handle them by their edges to avoid touching sensitive connectors or components. Use an anti-static wrist strap to prevent electrostatic discharge (ESD) damage.
• 環境： Do not expose the NUC to water, moisture, or extreme temperatures. Operate the device within its specified temperature and humidity ranges.

3. パッケージ内容

パッケージ内のすべての品目が揃っていることを確認してください。不足品や破損品がある場合は、販売店にご連絡ください。

• Intel NUC 11 Pro NUC11TNHi7 Barebone System
• 電源アダプター（AC/DC）
• ドキュメント（クイックスタートガイド、安全情報）

Image of the Intel NUC 11 Pro NUC11TNHi7 barebone system, showcasinコンパクトなデザインとフロントポートを備えています。

4. セットアップ

The Intel NUC 11 Pro NUC11TNHi7 is a barebone system, meaning you will need to install memory (RAM) and storage (SSD) before installing an operating system.

4.1. メモリ（RAM）の取り付け

1. Unscrew the bottom cover of the NUC chassis and carefully remove it.
2. Locate the DDR4 SDRAM memory slots on the motherboard.
3. Align the notch on the DDR4 SODIMM module with the notch in the memory slot.
4. Insert the module firmly into the slot at a 45-degree angle, then push down until the retaining clips snap into place.
5. Repeat for additional memory modules if applicable. The NUC supports up to 64 GB of DDR4 SDRAM.

4.2. ストレージ（SSD）のインストール

The NUC supports Serial ATA (SATA) storage devices. Depending on your specific NUC model, it may also support M.2 NVMe SSDs.

1. Identify the SATA data and power connectors on the motherboard and the corresponding bay for a 2.5-inch drive, or the M.2 slot for an M.2 SSD.
2. For 2.5-inch drives: Secure the drive in the designated bay and connect the SATA data and power cables.
3. For M.2 SSDs: Insert the M.2 SSD into the slot at an angle, then push down and secure it with the provided screw.

4.3. シャーシの再組み立て

1. Carefully replace the bottom cover of the NUC chassis.
2. Secure the bottom cover with the screws removed earlier.

4.4. 周辺機器の接続

1. モニター： Connect your monitor to the NUC using an HDMI cable.
2. キーボードとマウス: USB キーボードとマウスを、使用可能な USB ポートのいずれかに接続します。
3. 力： Connect the power adapter to the NUC's power input, then plug the power cord into an electrical outlet.

4.5. Installing Operating System

Since this is a barebone system, an operating system is not pre-installed. You will need to install your preferred operating system (e.g., Windows, Linux) from a bootable USB drive or network source. Refer to your operating system's installation guide for detailed steps.

5. 操作手順

5.1.電源のオン/オフ

• 電源オン: NUCの前面にある電源ボタンを押します。電源インジケーターライトが点灯します。
• 電源を切る： To shut down the system, use the operating system's shutdown procedure. For a forced shutdown, press and hold the power button for approximately 4 seconds until the system powers off.

5.2. ネットワーク接続

• Wi-Fi： The NUC supports Wi-Fi connectivity. Once your operating system is installed, configure your wireless network settings to connect to an available Wi-Fi network.
• ブルートゥース： The NUC includes Bluetooth for connecting wireless peripherals such as keyboards, mice, and headphones. Enable Bluetooth in your operating system settings and pair your devices.

6. メンテナンス

Regular maintenance helps ensure the longevity and optimal performance of your Intel NUC.

• クリーニング： Use a soft, dry cloth to clean the exterior of the NUC. For dust accumulation in vents, use compressed air. Do not use liquid cleaners directly on the device.
• ソフトウェアアップデート: Regularly update your operating system, drivers, and BIOS/firmware to ensure system stability, security, and performance. Visit the Intel support website for the latest drivers and BIOS updates for your NUC model.
• 環境条件: Operate the NUC in a clean, dry environment with adequate ventilation. Avoid extreme temperatures and direct sunlight.

7。 トラブルシューティング

Intel NUC で問題が発生した場合は、次の一般的なトラブルシューティング手順を参照してください。

• 電源なし:
  • 電源アダプターが NUC と正常な電源コンセントの両方にしっかりと接続されていることを確認します。
  • 別のデバイスを接続して、電源コンセントが機能していることを確認します。
  • 電源アダプターに目に見える損傷がないか確認してください。
• 表示なし:
  • Confirm the monitor is powered on and correctly connected to the NUC via an HDMI cable.
  • 別の HDMI ケーブルまたはモニターがある場合は、それを試してください。
  • RAM モジュールがスロットに正しく装着されていることを確認します。
• 周辺機器が検出されません:
  • 周辺機器を別の USB ポートに接続してみてください。
  • Ensure the peripheral's drivers are installed in your operating system.
  • Test the peripheral on another computer to confirm it is functional.
• システムの過熱:
  • NUC の通気口が塞がれていないことを確認してください。
  • Operate the NUC in a well-ventilated area.
  • 圧縮空気を使用して通気口のほこりを除去します。

8. 仕様

Below are the key technical specifications for the Intel NUC 11 Pro NUC11TNHi7 Barebone System:

9. 保証とサポート

For warranty information and technical support, please refer to the documentation included with your Intel NUC or visit the official Intel support website. Intel provides resources including drivers, software, and troubleshooting guides for their products.

通常、サポートは次のサイトから受けられます。 Intelの公式サポートページ and searching for your specific NUC model (NUC11TNHi7).