1.製品オーバーview
This manual provides detailed instructions for the installation, operation, and maintenance of the Gebildet 5-piece 12mm Blue LED Metal Indicator Light. These lights are designed for various applications requiring visual status cues, such as in power systems, telecommunications, machine tools, motors, and household appliances.
主な特徴:
- 定格巻tage: AC 110V-220V, ensuring broad compatibility.
- 耐久性のある構造: Shell made from brass plated nickel stainless steel for longevity.
- 防水： IP65 protection grade, suitable for use in various environments.
- エネルギー効率: Utilizes excellent LED chips for low power consumption (0.5W).
- 簡単なインストール: Designed for flush mounting with a 12mm hole diameter.
Image 1.1: A set of five Gebildet 12mm Blue LED Metal Indicator Lights, showcasing their compact design and pre-wired connections.
2. 技術仕様
Refer to the table below for detailed technical specifications of the indicator lights:
| 仕様 | 価値 |
|---|---|
| モデル番号 | E825 |
| 定格巻tage | 110V-220VAC |
| 定格電流 | 20mA |
| 定格消費電力 | 0.5W |
| ライトカラー | 青 |
| 取付穴径 | 12mm |
| パネルの厚さ | 1～8mm |
| ケーブル長さ | 15cm (approx. 140mm) |
| Lamp 長さ | 2.1センチ |
| シェル素材 | Brass Plated Nickel Stainless Steel |
| 防水クラス | IP65 |
| 一生 | 10,000 hours (LED Life: 100,000/H as per image) |
| 動作温度 | -30°C ～ +85°C |
| Nut Torque | 5-15Nm |
| 絶縁抵抗 | ≥1000MΩ |
| 絶縁強度 | ≥1900VAC/Min |
Image 2.1: Detailed technical drawing showing dimensions and key specifications of the indicator light.
3. 安全上の注意
Please read and understand all safety information before installing or operating the indicator lights. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- 電気による危険: Always disconnect power to the circuit before installing or servicing the indicator lights.
- 巻tage互換性： 稼働量を確認するtage of your application matches the 110V-220VAC rating of these lights. Connecting to an incorrect voltag製品が損傷し、安全上のリスクが生じる可能性があります。
- 適切な配線: Follow correct wiring polarity. For 110V-220VAC models, the yellow wire is typically positive, and the black wire is negative. Consult a qualified electrician if unsure.
- 環境条件: While waterproof (IP65), avoid submerging the lights or exposing them to extreme conditions beyond their specified operating temperature range.
- 安全なインストール: Ensure the lights are securely mounted to prevent loosening or accidental dislodgement.
4.インストールガイド
4.1 取り付け
- Select a suitable location on your panel or enclosure for the indicator light.
- Using a 12mm drill bit, carefully drill a mounting hole through the panel. Ensure the panel thickness is between 1mm and 8mm.
- Insert the indicator light into the drilled hole from the front of the panel.
- From the back of the panel, secure the light using the provided washer and nut. Tighten the nut to a torque of 5-15Nm to ensure a firm fit without over-tightening.
4.2配線
The indicator lights come pre-wired with approximately 15cm long cables for easy connection.
- Identify the power source for your application. Ensure the power is OFF before proceeding.
- 接続する 黄色のワイヤー of the indicator light to the 正（+） terminal of your 110V-220VAC power supply.
- 接続する 黒線 of the indicator light to the 負（-） terminal of your 110V-220VAC power supply.
- 短絡を防止するために、すべての接続が安全かつ適切に絶縁されていることを確認してください。
- Once wiring is complete, restore power to the circuit and test the indicator light.
画像4.1: クローズアップ view of the indicator lights, highlighting the yellow and black pre-wired connections for electrical hookup.
5. 操作
Once properly installed and wired, the Gebildet 12mm Blue LED Metal Indicator Light will illuminate when power is supplied to its terminals. It serves as a visual signal to indicate the status of the circuit or device it is connected to. The light will remain on as long as power is present and correctly connected.
Image 5.1: The indicator lights are designed with IP65 protection, making them splashproof and suitable for various environments.
6. メンテナンス
These LED indicator lights are designed for low maintenance and long operational life. Follow these general guidelines:
- クリーニング： If necessary, gently wipe the surface of the indicator light with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the metal finish or LED lens.
- 検査： Periodically check the mounting nut for tightness and the wiring connections for any signs of wear or corrosion.
- 環境保護: Ensure the lights are not exposed to conditions beyond their IP65 rating or specified temperature range to maintain their performance and lifespan.
7。 トラブルシューティング
If your Gebildet LED indicator light is not functioning as expected, consider the following troubleshooting steps:
- ライトが点灯しない:
- 電源を確認してください: Verify that power is being supplied to the circuit where the indicator light is installed.
- 配線の検査: Ensure the yellow wire is connected to the positive terminal and the black wire to the negative terminal of the power source. Check for loose or incorrect connections.
- Volを確認するtage: ボリュームを確認してくださいtage supplied to the light is within the 110V-220VAC range.
- 損傷の確認: Inspect the light for any visible physical damage.
- 断続動作:
- 緩い接続: すべての配線接続がしっかりと接続されているか再度確認してください。
- 電力変動: Ensure the power supply is stable and not experiencing intermittent interruptions.
これらの手順で問題が解決しない場合は、カスタマー サポートにお問い合わせください。
8. 保証と顧客サポート
Gebildet products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact Gebildet customer support directly. If you encounter any issues or have questions regarding the installation or operation of your indicator lights, please reach out to the manufacturer's customer service team for assistance.