Linkind SP4-Warm White Solar Pathway Lights - 8 Pack User Manual

1. はじめに

Thank you for choosing Linkind Solar Pathway Lights. These solar-powered lights are designed to illuminate and enhance your outdoor spaces such as gardens, walkways, yards, patios, and driveways. Featuring automatic on/off functionality, adjustable height options, and a durable waterproof design, these lights offer a convenient and energy-efficient lighting solution.

図1：以上view of Linkind Solar Pathway Lights highlighting key features.

2.製品コンポーネント

Each Linkind Solar Pathway Light unit consists of the following parts:

• ライトヘッド: Contains the solar panel, LED light source, and control button.
• Extension Poles: Two modular pole sections for adjustable height.
• 地面杭: Pointed stake for secure installation into the ground.

図2: 分解 view of a single Linkind Solar Pathway Light unit.

3. セットアップとインストール

Follow these steps to assemble and install your solar pathway lights:

1. ライトを組み立てる: Connect the desired number of extension poles to the light head and then attach the ground stake to the bottom. You can choose from four different height combinations based on your preference and the installation area.
2. ライトをアクティブにする: Locate the red power button on the underside of the solar panel. Press the button once to activate the default low light mode.
3. 初期充電: Place the assembled lights in direct sunlight for 1-2 days to ensure a full initial charge. This allows the internal battery to reach its maximum capacity before first use.
4. 地上設置: Insert the ground stake vertically into soft soil in your desired location. Ensure the solar panel is exposed to direct sunlight for optimal charging.

Figure 3: Illustration of various height options for assembly.

インストールビデオガイド

ビデオ1: 詳細view, installation, and light demonstration of Linkind Solar Pathway Lights.

4. 操作手順

The Linkind Solar Pathway Lights are designed for ease of use with automatic functionality and multiple lighting modes.

• 自動オン/オフ: The lights feature a light sensor that automatically turns them on at dusk and off at dawn, provided they are in an active lighting mode.
• 照明モードの変更: Use the red power button on the light head to cycle through the available modes:
• 1xを押します： Low Light Mode (lasts up to 12 hours on a full charge).
• 2xを押します： High Light Mode (lasts up to 6 hours on a full charge).
• 3xを押します： Gradual Breathing Mode (light slowly dims and brightens, lasts up to 12 hours).
• 4xを押します： Off (turns the light off completely).

Figure 4: Visual representation of the three lighting modes and their durations.

図5：昼間は自動充電、夜間は点灯。

5. メンテナンス

To ensure optimal performance and longevity of your Linkind Solar Pathway Lights, follow these maintenance guidelines:

• クリーニング： 定期的にソーラーパネルを柔らかくて乾いた布で拭いてください。amp 布で埃や汚れ、ゴミを拭き取ってください。ソーラーパネルを清潔に保つことで、効率的な充電が可能になります。
• 配置: Ensure the lights are placed in an area that receives at least 6-8 hours of direct sunlight daily. Avoid shaded areas.
• 耐候性: The lights are IP65 waterproof, providing excellent resistance against rain and other weather conditions. However, prolonged submersion is not recommended.

Figure 6: The lights are designed to be waterproof for outdoor use.

6。 トラブルシューティング

ソーラー通路ライトが期待どおりに機能しない場合は、次の点を考慮してください。

• ライトが点灯しない: Ensure the light is in an active mode (not 'Off'). Press the red button to cycle through modes. Verify the solar panel is receiving sufficient direct sunlight.
• 短い点灯時間: Make sure the solar panel is clean and free from obstructions. Relocate the light to an area with more direct sunlight if necessary.
• 薄暗い光出力: Allow 1-2 full days of charging in direct sunlight for the battery to reach full capacity.

7. 仕様

Figure 7: Key lighting specifications: 3000K warm light and 200 lumens brightness.

8. 保証とサポート

For warranty information, technical support, or any product-related inquiries, please refer to the documentation included with your purchase or contact Linkind customer service directly. Contact details are typically provided in the product packaging or on the official Linkind webサイト。