Digital Temperature Controller Thermostat Switch XY-WT01

1. はじめに

The Reland Sun XY-WT01 is a high-precision digital temperature controller designed for various applications requiring precise temperature management. This versatile device supports both heating and cooling modes, features a clear LCD display for real-time temperature monitoring, and includes essential functions like power-down memory and high-temperature alarms. Its robust design makes it suitable for industrial control, smart home systems, and equipment protection.

図1: 前面 view of the XY-WT01 Digital Temperature Controller with its LCD display active.

2. 主な特徴

• 多機能操作: Supports power-down memory, urgent stop, and automatic parameter saving.
• リアルタイム表示: High-definition LCD provides real-time temperature readings with a quick refresh rate of 0.5 seconds.
• Dual Mode Control: Capable of operating in both heating (H) and cooling (C) modes.
• 高精度: Accurate temperature measurement with an error margin within 1 degree Celsius.
• アラーム機能: Integrated high-temperature alarm for safety and monitoring.
• 幅広い用途: Suitable for smart homes, industrial control, automatic irrigation, and more.

3. 技術仕様

4. 製品コンポーネントとレイアウト

The XY-WT01 controller features a compact design with an intuitive button layout and a clear LCD display. Understanding the components is crucial for proper operation.

図2: 前面 view of the XY-WT01 showing the control buttons and LCD display area.

• LCDディスプレイ: 現在の温度、設定温度、動作状態を表示します。
• 上ボタン（▲）： 値を増やしたり、メニューを移動したりするために使用されます。
• 下ボタン（▼）： 値を減らしたり、メニューを移動したりするために使用されます。
• SET Button (⚙️): パラメータ設定モードに入り、選択内容を確認します。
• 電源ボタン（⏻）： デバイスの電源をオンまたはオフにします。

5.設置と配線

Proper installation and wiring are essential for the safe and effective operation of the XY-WT01 controller. Ensure all connections are secure and follow local electrical codes.

図3：側面 view of the XY-WT01 illustrating the wiring terminals.

5.1. 電源接続

Connect the appropriate power supply to the designated power input terminals. Refer to the markings on the device for correct polarity and voltage requirements. Ensure the power source matches the controller's specifications.

5.2. センサー接続

Connect the NTC-10K B3950 temperature sensor to the sensor input terminals. The sensor probe should be placed in the environment where temperature measurement is required. Ensure the sensor cable is not damaged and is securely connected.

5.3. 負荷接続

Connect the heating or cooling device (load) to the output relay terminals. The controller will switch this relay to control the load based on the set temperature and operating mode. Ensure the load's current draw does not exceed the controller's maximum output current of 10A.

6. 操作手順

This section details the basic operation and parameter settings for the XY-WT01 temperature controller.

6.1. 電源のオン/オフ

• を押す 電源ボタン（⏻） to turn the device on. The LCD will display the current temperature.
• を押し続けます 電源ボタン（⏻） デバイスの電源をオフにするには、約 3 秒間押し続けます。

6.2.設定温度

• 通常の動作モードでは、 SET Button (⚙️) once. The display will flash the current set temperature.
• 使用 上へ（▲） そして 下へ（▼） ボタンを押して希望の温度値を調整します。
• を押す SET Button (⚙️) again to confirm the setting and exit. If no button is pressed for a few seconds, the setting will automatically save and exit.

6.3. Parameter Settings (P0-P6)

To access advanced parameter settings, press and hold the SET Button (⚙️) for approximately 3 seconds. The display will show