TEAMGROUP T-Force Delta RGB DDR5 メモリモジュール ユーザーマニュアル

1. はじめに

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your TEAMGROUP T-Force Delta RGB DDR5 32GB (2x16GB) 6400MHz Desktop Memory Module. This high-performance DDR5 memory kit is designed to deliver enhanced speed and stability for compatible systems, featuring vibrant RGB lighting and support for Intel XMP3.0 for optimized performance. It is compatible with Intel 600 Series Chipsets and newer platforms supporting DDR5 memory.

This image displays two individual TEAMGROUP T-Force Delta RGB DDR5 memory modules. Each module features a black heat spreader with the T-Force logo and 'DELTA' branding, accented by a translucent top bar that illuminates with RGB lighting.

2. セットアップとインストール

Proper installation of your memory modules is crucial for system stability and performance. Please follow these steps carefully:

1. 準備： Before beginning, ensure your computer is powered off and unplugged from the wall outlet. Discharge any static electricity by touching a grounded metal object, such as the computer case.
2. ケースを開く: コンピューターのケースを開いてマザーボードにアクセスします。
3. DIMM スロットを見つけます。 Identify the DDR5 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory (typically slots 2 and 4, or 1 and 3, counting from the CPU).
4. オープン保持クリップ: Gently push open the white or black retention clips at both ends of the selected DIMM slots.
5. メモリモジュールを挿入します: Align the notch on the bottom edge of the memory module with the key in the DIMM slot. Apply even pressure to both ends of the module until it clicks into place and the retention clips automatically close. Do not force the module if it does not fit; recheck the alignment.
6. インストールの確認: Ensure both retention clips are fully closed and the module is seated firmly and evenly in the slot.
7. Repeat for Second Module: Install the second memory module into the corresponding dual-channel slot following the same procedure.
8. ケースを閉じて電源を入れます: コンピューターのケースを閉じ、電源ケーブルを接続して、システムの電源を入れます。

This image shows a single TEAMGROUP T-Force Delta RGB DDR5 memory module securely installed in a motherboard's DIMM slot. The module's translucent top bar is illuminated with a gradient of blue and purple RGB lighting, highlighting its aesthetic design.

3. 操作と構成

3.1 Enabling XMP3.0

To achieve the rated 6400MHz speed, you must enable Intel XMP3.0 (Extreme Memory Profile) in your motherboard's BIOS/UEFI settings. This is a one-click overclocking feature that configures the memory to its optimal speed and timings.

1. BIOS/UEFI にアクセスします。 Restart your computer and repeatedly press the designated key (usually Del, F2, F10, or F12) during startup to enter the BIOS/UEFI setup.
2. XMP設定を見つけます: Navigate to the 'Overclocking', 'Memory Settings', or 'AI Tweaker' section. Look for an option labeled 'XMP', 'DOCP', or 'EXPO' (for AMD platforms, though this module is optimized for Intel).
3. プロを有効にするfile: Select the XMP3.0 profile (often labeled 'Profile 1' or similar) and enable it.
4. 保存して終了： Save the changes and exit the BIOS/UEFI. Your system will restart with the memory running at its advertised speed.

3.2 RGB照明制御

The T-Force Delta RGB DDR5 modules feature 120-degree ultra-wide RGB lighting. You can customize the lighting effects using your motherboard's RGB synchronization software.

• Install the appropriate RGB software for your motherboard (e.g., ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync).
• Launch the software and select the memory modules to customize their lighting patterns, colors, and synchronization with other RGB components in your system.

This image illustrates the compatibility of the memory modules with popular motherboard RGB synchronization software, allowing users to control and customize the lighting effects across their system. Supported software includes ASRock Polychrome Sync, ASUS Aura Sync, GIGABYTE RGB Fusion, and MSI Mystic Light Sync.

This image features four TEAMGROUP T-Force Delta RGB DDR5 memory modules installed side-by-side in a motherboard. The modules' RGB lighting cycles through a rainbow spectrum, showcasing the wide range of customizable lighting effects.

4. メンテナンス

TEAMGROUP T-Force Delta RGB DDR5 memory modules are designed for durability and reliability. Minimal maintenance is required.

• 清潔に保ちます： メモリモジュールやその他のコンポーネントに埃がたまるのを防ぐため、コンピューターの内部を定期的に清掃してください。圧縮空気を使って埃を優しく取り除いてください。
• 空気の流れを確保する: Maintain good airflow within your computer case to help dissipate heat from the memory modules, especially during prolonged high-performance operation.
• 物理的損傷を避ける: Handle memory modules by their edges to avoid touching the gold contacts or integrated circuits. Store unused modules in anti-static bags.

5。 トラブルシューティング

If you encounter issues with your memory modules, consider the following troubleshooting steps:

• システムが起動しない/画面が表示されない:
  • Ensure the memory modules are fully seated in their DIMM slots. Re-seat them by gently pushing down until the clips lock.
  • Verify that the modules are installed in the correct slots for dual-channel operation as specified by your motherboard manual.
  • If using multiple modules, try booting with only one module at a time to identify a potentially faulty stick or slot.
• Incorrect Memory Speed Detected:
  • Access your BIOS/UEFI settings and confirm that Intel XMP3.0 is enabled. If not, enable it and save changes.
  • Ensure your motherboard BIOS/UEFI is updated to the latest version, as this can improve memory compatibility and stability.
• システムの不安定性/クラッシュ:
  • If XMP is enabled, try disabling it to see if the system stabilizes. This can help determine if the issue is related to the overclocked profile またはその他のコンポーネント。
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic, MemTest86) to check for errors in the memory modules.
• RGB Lighting Not Working/Synchronizing:
  • Ensure the motherboard's RGB software is correctly installed and up-to-date.
  • 他の RGB 制御ソフトウェアとの競合がないか確認します。
  • Verify that the RGB headers on the motherboard are properly connected (though these modules typically draw power and RGB control directly from the DIMM slot).

6. 仕様

7. 保証とサポート

TEAMGROUP products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official TEAMGROUP webサイトまたは購入時に付属するドキュメントをご覧ください。

7.1 テクニカルサポート

For technical assistance, troubleshooting, or product inquiries, please visit the official TEAMGROUP support channels:

• 公式ブランドストア: Visit the TEAMGROUP Store on Amazon
• ユーザーガイド（PDF）： ユーザーガイド（PDF）をダウンロード
• For additional support, please visit the TEAMGROUP official website and navigate to their support section.