SmartHeart 01-539WR

SmartHeart Automatic Blood Pressure Monitor

Model: 01-539WR

重要な安全情報

Please read this instruction manual thoroughly before using your SmartHeart Blood Pressure Monitor. Keep this manual for future reference.

  • 何らかの病状がある場合は、このデバイスを使用する前に医師に相談してください。
  • 健康上の問題や病気の診断や治療にこのデバイスを使用しないでください。
  • Measurements taken with this device are for reference only. Always consult a healthcare professional for interpretation of results.
  • お子様の手の届かない場所に保管してください。
  • ユニットを分解したり、修理を試みたりしないでください。
  • Use only approved accessories and parts.

パッケージ内容

  • SmartHeart Automatic Blood Pressure Monitor Unit
  • Wide-Range Arm Cuff (fits arm circumference 8.6 in. - 16.5 in. / 22 cm - 42 cm)
  • 取扱説明書
  • 収納バッグ

製品終了view

Familiarize yourself with the components of your blood pressure monitor.

SmartHeart Automatic Blood Pressure Monitor and arm cuff in a black storage bag

図1: SmartHeart Automatic Blood Pressure Monitor with its wide-range arm cuff and storage bag. The monitor features a large digital display and two buttons: MEM and START.

Close-up of the SmartHeart Blood Pressure Monitor display showing readings 120/80 and pulse 60

図2: 詳細 view of the monitor's display. It shows systolic (SYS), diastolic (DIA) pressure in mmHg, and pulse rate per minute. A hypertension indicator is visible on the left side of the screen.

Diagram explaining Intelligent Inflation Technology with an image of the monitor

図3: Intelligent Inflation Technology. This feature uses previous measurement history to determine the optimal inflation level, resulting in faster and more comfortable readings.

Diagram explaining Wide-Range Arm Cuff features and how to choose proper size

図4: Wide-Range Arm Cuff details. The cuff fits arm circumferences from 8.6 to 16.5 inches (22-42 cm), features a traditional D-ring style, soft fabric, and hook & loop closure for a comfortable fit. It is not made with natural rubber latex.

設定

1. バッテリーの取り付け

Open the battery compartment cover on the back of the unit. Insert four (4) AA alkaline batteries, ensuring correct polarity (+/-). Close the cover securely.

2. アームカフの接続

アームカフからのエアチューブコネクタをモニターユニットの左側にあるエアジャックにしっかりと挿入します。

3. Setting Date and Time (if applicable)

Refer to the specific instructions in your manual for setting the date and time, usually involving pressing the 'MEM' button in a specific sequence while the unit is off or in setup mode.

操作手順

測定の準備

  • 測定前の少なくとも 30 分間は、食事、飲酒、喫煙、運動を避けてください。
  • 測定を行う前に少なくとも 5 分間休憩してください。
  • 背中を支え、足を床に平らに置いてまっすぐに座ります。
  • カフが心臓の高さになるように腕を平らな面に置きます。
  • カフは衣服の上からではなく、素肌に直接装着してください。

アームカフの装着

  1. 左腕をカフループに通します。エアチューブは腕の内側に沿って伸びているはずです。
  2. Position the cuff so the bottom edge is approximately 1 inch (2-3 cm) above your elbow.
  3. Wrap the cuff snugly around your arm, securing it with the hook and loop fastener. Ensure it is not too tight or too loose.

測定を行う

  1. With the cuff correctly applied and the unit connected, press the 始める ボタン。
  2. カフは自動的に膨らみます。測定中は静かにしてください。
  3. 測定が完了すると、カフが収縮期血圧、拡張期血圧、脈拍数が画面に表示されます。
  4. The unit will automatically store the reading in its memory.
  5. を押す 始める ボタンをもう一度押すとユニットの電源がオフになります。1 分間操作しないと自動的に電源がオフになります。

メモリ機能

The SmartHeart monitor stores previous readings for easy review.

View保存された測定値を取得する

  • From the OFF state, press the メム ボタン。
  • 最新の読み取りが最初に表示されます。
  • を押す メム ボタンを繰り返し押すと、古い読み取り内容をスクロールします。
  • The unit will display the average of the last three readings (if available) before showing individual readings.

メモリのクリア

To clear all stored readings, press and hold the メム button for approximately 5 seconds while in memory recall mode until "CLR" or "---" appears on the display, indicating memory has been cleared.

メンテナンスとケア

  • Clean the monitor unit and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Store the unit in its storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
  • 長期間使用しない場合は、液漏れを防ぐため電池を取り外してください。
  • Do not drop or subject the unit to strong impacts.
  • Regularly check the air tube and cuff for any signs of damage or wear.

トラブルシューティング

問題考えられる原因解決
電源を入れても何も表示されない。電池が切れているか、正しく挿入されていません。正しい極性を確認して、新しい電池と交換してください。
"E1" or "Err" displayed.カフが正しく装着されていないか、測定中に動いた。Reapply cuff snugly. Remain still and silent during measurement.
一貫性のない測定値。Improper measurement technique, stress, or environmental factors.Ensure proper preparation and technique (see Operating Instructions). Take multiple readings over time. Consult a physician if concerns persist.
カフが膨らまない。Air tube not connected properly or leak in cuff/tube.Check air tube connection. Inspect cuff and tube for damage.

仕様

  • モデル: 01-539WR
  • 測定方法: オシロメトリック
  • 測定範囲:
    • 圧力: 0-300 mmHg
    • 脈拍: 40-199 ビート/分
  • 正確さ:
    • 圧力:±3mmHg
    • 脈拍: 読書の±5%
  • 袖口サイズ: Wide-Range Arm Cuff (fits arm circumference 8.6 in. - 16.5 in. / 22 cm - 42 cm)
  • メモリ: 最大99の測定値を保存
  • 電源: 単三電池4本(別売)
  • 自動遮断: Approximately 1 minute after last operation
  • 動作条件: 50°F - 104°F (10°C - 40°C), 15-90% RH non-condensing
  • 保管条件: -4°F - 140°F (-20°C - 60°C), 10-95% RH non-condensing
  • 重さ: 約8オンス(電池を除く)
  • メーカー: ベリディアンヘルスケア
  • 国際コード: 845717009201

保証とサポート

SmartHeart products are manufactured to strict quality standards. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official SmartHeart webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。

注意: 保証条件は地域によって異なる場合があります。

© 2024 SmartHeart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.