導入
This manual provides detailed instructions for the safe and efficient operation of your XCFDP AC 220V 0.45kW 0.5HP Variable Frequency Drive (VFD). This VFD is designed to convert single-phase 220V input to three-phase output for precise spindle motor speed control. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper usage and to prevent damage or injury.
安全上の注意
Always observe the following safety precautions to prevent electric shock, fire, or personal injury. Failure to comply with these instructions may result in severe consequences.
- 配線やメンテナンスを行う前に、必ず電源を切ってください。
- 設置と配線は資格のある人のみが行ってください。
- 入力ボリュームを確認するtage matches the VFD's specifications (AC 220V +/-15%).
- Properly ground the VFD to prevent electric shock.
- Do not operate the VFD in environments with explosive gases, flammable materials, or excessive dust.
- 電源を切った直後は残留電圧が残っているため、内部部品に触れないでください。tageが存在する可能性があります。
- Ensure adequate ventilation around the VFD to prevent overheating.
画像： The VFD unit highlighting various safety protections including undervoltage、overvoltage, overload, overcurrent, over temperature, and phase loss protection.
製品の特徴とコンポーネント
The XCFDP VFD is equipped with a user-friendly control panel and robust design features for reliable performance.
多機能コントロールパネル
画像： A close-up of the VFD's control panel, showing the 5-digit LED display, various function keys, and the speed adjustment knob. Each component is numbered for easy identification.
The control panel allows for easy monitoring and adjustment of the VFD's parameters. Key components include:
- 5 Digit LED Display: Shows frequency, current, and other operational data.
- Shift Key (DISP): Used to shift between display modes or parameters.
- Enter or Exit Programming (PROG): Accesses and exits the programming menu.
- Function / Save Key (FUNC DATA): Selects functions and saves parameter settings.
- Forward/Reverse (FWD REV): Changes the motor's rotation direction.
- Numerical Modification Keys (Up/Down Arrows): パラメータ値を調整します。
- 速度調整ノブ: 出力周波数/モーター速度を微調整します。
- Start Key (RUN): モーターの動作を開始します。
- Stop / Reset Key (STOP RESET): Halts motor operation and resets errors.
デザインアドバンtages
画像： A composite image showing four key design advantages of the VFD: efficient vent design for heat dissipation, three anti-paint protection lines for durability, robust tightness and integrity of the casing, and a large heat sink for extended service life.
- 通気口のデザイン: Optimized for low noise and fast heat dissipation, ensuring stable operation.
- Protection Lines: Features three anti-paint protection lines for enhanced durability and resistance.
- Tightness and Integrity: Constructed with high-quality materials for a secure and robust enclosure.
- より長い耐用年数: Designed with efficient cooling and durable components to ensure extended operational life.
セットアップとインストール
Proper installation and wiring are crucial for the safe and correct functioning of the VFD. Ensure all power is disconnected before proceeding.
配線図
画像： A clear wiring diagram illustrating the connection of a single-phase AC 220V input to the VFD (terminals L, N) and the three-phase AC output (terminals U, V, W) to a motor. A grounding terminal (GND) is also shown.
Connect the VFD according to the following diagram:
| ターミナルラベル | 機能説明 |
|---|---|
| L、N | Single phase AC 220V (+/-15%) input terminal. |
| U、V、W | Output terminals to connect to a Delta-connection method three-phase AC motor. |
| グランド | Grounding terminal. Ensure proper grounding for safety. |
重要： You need to set the parameters of the VFD before connecting the motor. Otherwise, the settings may not be saved correctly.
External Terminal Wiring Diagram
画像： An illustration of the external terminal block on the VFD, detailing connections for potentiometer/analog voltage input, and wire-controlled forward/reverse switching, along with multiple speed settings.
For external control, refer to the diagram above. Before using external terminal functions, adjust parameter P011 to '2'. For potentiometer/analog voltage input, adjust P010 to '2'.
手術
Operating the VFD involves setting parameters and controlling the motor speed and direction.
Basic Operation and Control Panel Functions
画像： The VFD control panel with labels and descriptions for each button and display element, including programming, function/save, shift, start, and stop/reset keys, along with the speed adjustment knob.
The VFD is designed for easy operation, adjustment, installation, and disassembly. Refer to the control panel section for button descriptions.
- モーターの始動: を押す 走る 鍵。
- モーターの停止: を押す 停止/リセット 鍵。
- 速度の調整: Use the Speed Adjustment Knob or the Up/Down arrow keys to modify the output frequency.
- 方向転換： 使用 FWD / REV 鍵。
- プログラミングパラメータ: を押す プログラム key to enter the programming mode. Use the Up/Down keys to navigate and the FUNC DATA key to select and save.
注記： Parameters must be set in the stop state; otherwise, changes may not be saved.
アプリケーションリファレンス
画像： A quick selection reference guide for VFD applications, categorizing machines into "Light Load Machine" (e.g., fan, compressor, water pump, sewage treatment) and "High Load Machine" (e.g., injection machine, roots blower, crusher, windlass, ball mill, rolling mill), with recommendations for VFD power selection.
This VFD is suitable for 220V (+/-15%) three-phase AC motors. For light load machines, select a VFD with the same power rating as the motor. For high load machines, it is recommended to select a VFD with 1 to 2 times the power of the motor.
仕様
Detailed technical specifications for the XCFDP AC 220V 0.45kW 0.5HP Variable Frequency Drive.
| 仕様 | 価値 |
|---|---|
| モデル番号 | 220V 0.45kw 0.6HP |
| 入力ボリュームtage | AC 220V (+/-15%) Single Phase |
| 出力巻tage | AC 220V Three Phase |
| 出力定格 | 0.45kW（0.5HP） |
| 定格電流 | 3A |
| 製品寸法（長さ x 幅 x 高さ） | 4.57インチ x 3.98インチ x 6.38インチ (11.6cm x 10.1cm x 16.2cm) |
| アイテム重量 | 2.27ポンド |
| 表示タイプ | LCDまたはLED |
| メーカー | XCFDP |
画像： The VFD unit with its dimensions clearly labeled: 6.38 inches (16.2 cm) height, 3.98 inches (10.1 cm) width, and 4.57 inches (11.6 cm) depth.
メンテナンス
Regular maintenance helps ensure the longevity and optimal performance of your VFD.
- VFDを清潔に保ち、ほこりやゴミが付かないようにしてください。清掃には柔らかく乾いた布を使用してください。
- Ensure ventilation openings are not obstructed to allow for proper heat dissipation.
- すべての配線接続部の締め付け具合や摩耗や損傷の兆候がないか定期的に確認してください。
- VFD を過度の湿気や腐食性の環境にさらさないでください。
トラブルシューティング
このセクションでは、よくある問題に関する一般的なガイダンスを提供します。複雑な問題については、テクニカルサポートにお問い合わせください。
- VFD not powering on: Check input power connections and ensure the circuit breaker is on.
- モーターが動かない: Verify wiring to the motor, check VFD parameters, and ensure the RUN command is active.
- Overload error: Reduce motor load, check motor current, or verify VFD overload settings.
- Overheating error: Ensure proper ventilation, clean cooling fins, and check ambient temperature.
- Parameter setting issues: Ensure parameters are set while the VFD is in the stop state.
保証とサポート
XCFDP is committed to providing quality products and support.
- 保証： This product includes an 18-month free after-sales warranty.
- テクニカルサポート： Lifelong technical support is provided for this product.
- For further assistance, please refer to the contact information provided with your purchase or visit the official XCFDP webサイト。
製品終了view ビデオ
ビデオ： An official product video from XCFDP providing an overview of the AC 220V 0.45kW 0.5HP Variable Frequency Drive, showcasing its features and design. This video is 20 seconds long.