Festool VECTURO OSC 18 HPC 4,0 EI-Set Cordless Oscillator User Manual

導入

The Festool Cordless VECTURO Oscillating Multi-Tool is designed for versatile cutting, sanding, and scraping applications. This manual provides essential information for the safe and efficient operation, maintenance, and care of your tool.

The VECTURO OSC 18 HPC 4,0 EI-Set features a StarlockMax® holding system for quick blade changes, a brushless EC-TEC motor for durability, and vibration isolation for user comfort. It operates on an 18V lithium-ion battery system.

図1: The Festool VECTURO OSC 18 HPC 4,0 EI-Set, including the multi-tool, two 18V battery packs, a rapid charger, various accessories, and a Systainer SYS3 M 187 for storage and transport.

安全情報

Always observe general power tool safety guidelines. Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• 安全メガネ、聴覚保護具、手袋などの適切な個人用保護具 (PPE) を着用してください。
• 操作前にワークがしっかりと固定されていることを確認してください。
• Keep hands and body parts away from the oscillating blade during operation.
• 調整、アクセサリの交換、またはツールの保管を行う前に、バッテリー パックを外してください。
• Use only Festool-approved accessories and replacement parts.

含まれるコンポーネント

The Festool VECTURO OSC 18 HPC 4,0 EI-Set includes the following items:

• Vecturo Multi-Tool
• Two BP 18 Li 4.0 Ah HPC-ASI Battery Packs
• TCL 6 Rapid Charger
• OSC-A Adapter
• OSC-AH Position Aid
• OSC-AV Dust Extraction Device
• OSC-TA Depth Stop
• USB 78/32/Bi/OSC Universal Saw Blade
• USB 50/35/Bi/OSC Universal Saw Blade
• HSB 100/Bi/OSC Wood Saw Blade
• システナー SYS3 M 187

設定

1. バッテリーの充電と取り付け

1. Insert the battery pack into the TCL 6 Rapid Charger. The charger's indicator light will show the charging status.
2. 完全に充電されたら、バッテリーを充電器から取り外します。
3. Align the charged battery pack with the battery slot on the VECTURO Multi-Tool and slide it in until it clicks securely into place.

2. Blade Installation (StarlockMax System)

The VECTURO features a keyless StarlockMax® quick-change system for fast and easy blade replacement.

1. バッテリーがツールから取り外されていることを確認してください。
2. Press the green lever on the tool head to release the blade holder.
3. Align the desired StarlockMax blade with the holder and press it firmly until it clicks into place.
4. Verify the blade is securely attached before use.

図2: トップ view of the tool demonstrating the StarlockMax blade attachment mechanism.

図3: The VECTURO Multi-Tool with a saw blade securely installed.

3. Accessory Attachment (Dust Extraction, Depth Stop, Position Aid)

Attach optional accessories as needed for specific applications.

• OSC-AV Dust Extraction Device: Slide the dust extraction device onto the tool head until it locks into place. Connect a compatible dust extractor hose for dust-free operation.
• OSC-TA Depth Stop: Attach the depth stop for controlled plunge cuts. Adjust the depth setting according to your requirements.
• OSC-AH Position Aid: Use the position aid for precise guidance during cuts, especially for delicate or intricate work.

図4: Attaching the OSC-AV Dust Extraction Device to the VECTURO Multi-Tool.

操作手順

1. 電源のオン/オフと速度制御

• To turn the tool on, press the power switch.
• To turn the tool off, release the power switch.
• The brushless EC-TEC motor features variable speed control. Adjust the speed dial to match the material and application for optimal results.

2. カットの作成

Always ensure the workpiece is stable and secured. Apply gentle, consistent pressure. The tool's vibration isolation system enhances comfort during extended use.

• プランジカット： For precise plunge cuts, use the OSC-TA Depth Stop. Position the blade over the desired cutting area and slowly lower the tool into the material.
• 一般的な切断: Guide the tool along the cutting line, allowing the blade to do the work. Avoid forcing the tool, which can lead to overheating or damage.

図5: Demonstrating a controlled plunge cut with the VECTURO Multi-Tool.

図6: The VECTURO Multi-Tool performing a cut with the OSC-TA Depth Stop attached for accuracy.

メンテナンス

1. 清掃

• After each use, disconnect the battery and clean the tool with a dry cloth.
• Remove any dust or debris from the ventilation openings to prevent overheating.
• Periodically clean the blade holder mechanism to ensure smooth operation.

2. ブレードの交換

Replace blades when they become dull or damaged to maintain cutting efficiency and safety. Refer to the "Blade Installation" section for detailed steps.

3. バッテリーのお手入れ

• バッテリーパックは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• Do not allow battery packs to fully discharge for extended periods. Recharge them regularly.
• If a battery pack is damaged, discontinue use and replace it with an authorized Festool battery.

トラブルシューティング

This section addresses common issues you might encounter with your Festool VECTURO Multi-Tool.

If you encounter issues not listed here or if solutions do not resolve the problem, contact Festool customer support.

仕様

保証とサポート

保証情報

All Festool power tools, including the VECTURO OSC 18 HPC 4,0 EI-Set, come with a comprehensive 3-year wear-and-tear warranty. This warranty also includes a 2-day standard repair time そして 1か月の満足保証.

For detailed warranty terms and conditions, please refer to the official Festool webサイトをご覧いただくか、カスタマー サポートにお問い合わせください。

カスタマーサポート

For technical assistance, service, or warranty claims, please contact Festool customer support through their official channels. Visit the AmazonのFestoolストア またはそのオフィシャル web連絡先情報のサイト。