Waveshare 7-inch Resistive Touch Screen LCD (1024x600) User Manual

1。 オーバーview

This manual provides detailed instructions for the Waveshare 7-inch Resistive Touch Screen LCD, featuring a 1024x600 hardware resolution and HDMI interface. It is designed for use with Raspberry Pi (all versions) and can also function as a PC monitor (Windows 11/10/8.1/8/7 compatible). The display supports backlight control for power efficiency and includes drivers for Raspbian, Ubuntu, Kali, and Retropie systems.

画像： The Waveshare 7-inch HDMI LCD connected to a Raspberry Pi, showcasing its display capabilities with the Raspberry Pi OS desktop.

画像： 角度のついた view of the 7-inch HDMI LCD, highlighting its compact design and screen surface.

主な特徴:

• 7-inch display with 1024x600 hardware resolution.
• Resistive touch control for interactive use.
• HDMI interface for display, compatible with Raspberry Pi and PCs.
• IPS panel for wide 170-degree view角度を変える。
• Supports various Raspberry Pi versions (Raspberry Pi 1B and Zero require an additional HDMI cable).
• PC compatibility with Windows 11/10/8.1/8/7 (touch function not supported on PC without specific drivers).
• Drivers provided for Raspbian, Ubuntu, Kali, and Retropie operating systems.
• Backlight control for power saving.

2. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• 7-inch HDMI LCD x1
• HDMI to Micro HDMI Connector x1
• HDMI Connector x1
• スタイラス x1
• RPi Screws Pack (4pcs) x1
• Quick Start Sheet x1

3. セットアップ

3.1 Raspberry Piへの接続

This display is designed for direct connection to Raspberry Pi boards. Ensure your Raspberry Pi is powered off before connecting.

画像： 接続例amples for Raspberry Pi 4 and Raspberry Pi 3B+ with the 7-inch HDMI LCD. This diagram illustrates how to connect the display to different Raspberry Pi models, including power and HDMI connections.

1. Connect the HDMI port of the display to the HDMI port of your Raspberry Pi using the provided HDMI connector or HDMI to Micro HDMI connector, depending on your Raspberry Pi model.
2. Connect the power input of the display to a 5V/3A power source. For some Raspberry Pi models, the display can be powered directly from the Raspberry Pi's GPIO pins or USB port.
3. For touch functionality, connect the touch port (SPI) of the display to the corresponding GPIO pins on your Raspberry Pi.
4. Secure the display to your Raspberry Pi using the provided RPi screws pack if desired.
5. Install the necessary drivers for your operating system (e.g., Raspbian, Ubuntu, Kali, Retropie) to enable touch functionality and optimal display performance. Refer to the official Waveshare documentation for specific driver installation instructions.

注記： Raspberry Pi 1B and Raspberry Pi Zero require an additional HDMI cable, which is not included in the standard package.

3.2 PCへの接続

The display can be used as a secondary monitor for a PC. Touch functionality is generally not supported when connected to a PC without specific driver installation.

画像： The 7-inch HDMI LCD connected to a PC, showing a Windows desktop environment. This demonstrates the display's capability to function as an external monitor for a computer.

1. Connect the HDMI port of the display to the HDMI output of your PC using an HDMI cable (purchased separately).
2. Connect the display to a 5V/3A power source.
3. Your PC should automatically detect the display. You may need to adjust display settings in your operating system (e.g., resolution, orientation) for optimal viewing。

注記： An additional HDMI cable is required for PC connection and is not included.

4. 操作手順

4.1 電源のオン/オフ

To power on the display, ensure it is connected to a stable 5V/3A power source. The display will automatically power on when power is supplied. To power off, disconnect the power source.

4.2 タッチ機能

The 7-inch HDMI LCD features resistive touch control. This function is primarily supported when connected to a Raspberry Pi with the appropriate drivers installed.

画像： A hand using the included stylus to interact with the touch screen. This illustrates the resistive touch control feature of the display.

• Use the provided stylus or a blunt object to interact with the screen. Avoid using sharp objects that could damage the resistive layer.
• Ensure touch drivers are correctly installed on your Raspberry Pi for touch input to be recognized by the operating system.
• Calibration may be required after driver installation for accurate touch response. Follow the instructions provided with the driver package.

4.3 バックライトコントロール

The display supports backlight control to adjust brightness and save power. Specific control methods depend on the operating system and driver configuration. Refer to the Waveshare documentation for detailed instructions on adjusting backlight settings for your specific setup.

4.4OSDメニュー

The display features an On-Screen Display (OSD) menu for adjusting various display parameters such as brightness, contrast, and color settings. The OSD menu is controlled by physical buttons located on the back of the display.

画像： 後方 view of the display's circuit board, highlighting the "Menu", "Up/Left", "Down/Right", and "Return" buttons used to navigate and control the On-Screen Display (OSD) menu.

• を押す メニュー ボタンを押して OSD メニューを開きます。
• 使用 上/左 そして 下/右 メニュー オプションを移動するためのボタン。
• を押す メニュー オプションを選択するか設定を確認するには、もう一度ボタンを長押しします。
• を押す 戻る ボタンを押すと、前のメニューに戻るか、OSD を終了します。

5. メンテナンス

• クリーニング： Use a soft, dry, lint-free cloth to clean the screen surface. For stubborn marks, lightly damp布に水または画面に安全な洗浄液を含ませてください。刺激の強い化学薬品や研磨剤は使用しないでください。
• ストレージ： 使用していないときは、ディスプレイを直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• 取り扱い： Handle the display by its edges. Avoid applying excessive pressure to the screen surface.
• 力： 清掃やメンテナンスを行う前には必ず電源を切ってください。

6。 トラブルシューティング

• 表示なし:
  • Ensure the display is correctly connected to a 5V/3A power source.
  • Verify the HDMI cable is securely connected to both the display and the source device (Raspberry Pi/PC).
  • Check if the source device is powered on and outputting a video signal.
  • If using with Raspberry Pi, ensure the config.txt file is correctly configured for the display resolution.
• Touch Not Working:
  • Ensure the touch interface (SPI) is correctly connected to your Raspberry Pi's GPIO pins.
  • Verify that the correct touch drivers are installed for your operating system on the Raspberry Pi.
  • Perform touch calibration if available in your driver software.
  • Note that touch functionality is generally not supported when connected to a PC without specific driver installation.
• Screen Flickering or Unstable Image:
  • Check the power supply; an insufficient power supply can cause instability. Use a stable 5V/3A adapter.
  • Ensure the HDMI cable is not damaged and is properly seated.
  • Try a different HDMI cable if possible.
• Incorrect Colors or Resolution:
  • Adjust display settings via the OSD menu.
  • Adjust resolution settings on your source device (Raspberry Pi/PC) to match the display's native resolution of 1024x600.
  • For Raspberry Pi, check config.txt settings related to HDMI mode and resolution.

7. 仕様

画像： An infographic summarizing the key specifications of the display, including size, resolution, display port, panel type, viewing angle, touch type, touch port, and OSD menu features.

画像： A technical drawing illustrating the physical dimensions of the 7-inch HDMI LCD in millimeters, including mounting hole positions and overall size.

8. サポート

For further technical support, driver downloads, or additional documentation, please visit the official Waveshare website. You can also contact Waveshare customer service for assistance with product-related inquiries.

正式 Webサイト： www.waveshare.com

Please have your product model number (7inch HDMI LCD) and purchase details ready when contacting support.