XSPANDER Replacement Shaver Head Assembly User Manual

導入

This manual provides essential information for the installation, maintenance, and safe use of your XSPANDER Replacement Complete Head Assembly. This product is designed to restore the performance of your compatible Philips Norelco electric shaver.

画像： 前面と背面 view of the XSPANDER replacement shaver head assembly, showing the three rotary cutting elements on the front and the attachment mechanism on the back.

安全情報

注意：

This product contains sharp blades. Exercise extreme care when handling, installing, or cleaning the shaver head assembly to prevent personal injury. Keep out of reach of children.

互換性

The XSPANDER Replacement Complete Head Assembly (Model GD-666-2) is compatible with a wide range of Philips Norelco electric shavers. Please verify your shaver model against the list below to ensure proper fit and function.

Compatible Philips Norelco S5000 Series Models:

• S5010、S5011、S5013、S5015、S5050、S5070、S5074、S5075、S5077、S5078、S5079、S5080、S5082、S5085、S5090
• S5100, S5110, S5130, S5140, S5150, S5205, S5210, S5211, S5213, S5230, S5231, S5251, S5252
• S5270, S5271, S5272, S5273, S5290, S5310, S5320, S5330, S5335, S5340, S5355, S5360, S5370, S5380, S5390, S5391, S5395, S5396
• S5400, S5420, S5510, S5520, S5560, S5570, S5571, S5572, S5590, S5600, S5610, S5620, S5640, S5650, S5660, S5675

Compatible Philips Norelco S6000 Series Models:

• S6011、S6015、S6100、S6400、S6550、S6580、S6610、S6620、S6630、S6640、S6670、S6680、S6800、S6810、S6880

画像： Visual representation of several Philips Norelco shaver models from the 5000 and 6000 series, indicating compatibility with the replacement head assembly. Note: The shaver itself is not included with the replacement head.

セットアップとインストール

Follow these steps to replace the shaver head assembly on your Philips Norelco electric shaver:

1. Open the Shaving Unit: Press the release button on your shaver to open the shaving unit. Gently pull the old shaving unit off the shaver body.
2. Remove Retaining Frame: Turn the lock on the old shaving unit counter-clockwise. This will release the retaining frame. Carefully remove the retaining frame.
3. Remove Old Shaving Heads: Lift and remove the individual shaving heads from the shaving head holder.
4. Insert New Shaving Heads: Place the new shaving heads from your XSPANDER replacement assembly into the shaving head holder. Ensure they are seated correctly.
5. Reinsert Retaining Rings: Place the retaining rings back onto the shaving head holder and turn them clockwise until they click into place, securing the new heads.
6. Close Shaving Headholder: Reinsert the hinge of the shaving head holder into the slot of the shaving unit. Close the shaving headholder until it clicks securely.

画像： A visual guide illustrating the six steps for replacing the shaver head assembly, from opening the unit to securing the new head.

メンテナンスと清掃

Regular cleaning of your shaver head assembly is crucial for maintaining optimal performance and hygiene. The XSPANDER replacement head is designed for easy cleaning.

毎日の清掃:

• After each shave, rinse the shaver head under warm running water.
• Ensure all hair clippings are washed away from the blades and the head assembly.
• Shake off excess water and allow the head to air dry before reattaching or storing the shaver.

徹底的な清掃（毎週/隔週）:

• Open the shaver head assembly as described in the "Setup and Installation" section.
• Remove the individual shaving heads.
• Rinse each shaving head and the main head holder thoroughly under warm running water. You may use a small brush (not included) to remove stubborn debris.
• 再組み立てする前に、すべてのコンポーネントを完全に自然乾燥させてください。

画像： Left: A shaver head being rinsed under a faucet, demonstrating the ease of cleaning. Right: A diagram illustrating the steps for cleaning the shaver head, including rinsing and detaching the individual blades for a more thorough clean.

仕様

トラブルシューティング

シェービング性能が悪い:

• 正しく設置されていることを確認してください: Double-check that the replacement head assembly is correctly installed and securely clicked into place. Refer to the "Setup and Installation" section.
• 徹底的に掃除する: Accumulated hair and debris can affect shaving efficiency. Perform a thorough cleaning of the shaver head as described in the "Maintenance and Cleaning" section.
• 損傷の確認: Inspect the blades and the head assembly for any visible damage or bent parts. If damaged, the unit may need to be replaced.

Head Not Fitting Securely:

• 互換性の確認: Confirm that your shaver model is listed in the "Compatibility" section. This replacement head is designed for specific Philips Norelco S5000 and S6000 series models.
• 正しい配置: Ensure the head is aligned correctly with the shaver body before attempting to click it into place. Do not force it.

保証とサポート

Specific warranty information for the XSPANDER Replacement Shaver Head Assembly is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please refer to the product listing on the retailer's webサイトをご覧いただくか、販売者に直接お問い合わせください。

さらに詳しいサポートが必要な場合は、 XSPANDER Store on Amazon.