ADVANTECH VEGA-3300-A0E0 4K HEVC エンコーダカード ユーザーマニュアル

導入

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ADVANTECH VEGA-3300-A0E0 4K HEVC Encoder Card. The VEGA-3300-A0E0 is a high-performance encoder card based on the Socionext M31, designed for real-time 4K HEVC encoding.

Figure 1: ADVANTECH VEGA-3300-A0E0 4K HEVC Encoder Card. This image shows the front view of the encoder card, highlighting its PCIe interface, various input/output ports, and the heatsink design.

主な特徴

• 1-ch 4K (2160p) or 4-ch FHD (1080p) @ 60 fps real time encoding in Main 8, Main 10 or Main 10 4:2:2 modes.
• Less than 15W power consumption.
• Simple-to-use API and example code for FFmpeg and GStreamer multimedia frameworks.

設定

1. ハードウェアのインストール

1. 電源オフシステム: インストールを開始する前に、コンピュータ システムの電源が完全にオフになっており、電源プラグが抜かれていることを確認してください。
2. オープンシャーシ: Carefully open your computer's chassis to access the motherboard's PCIe slots.
3. PCIe スロットを見つけます: Identify an available PCIe x16 or compatible slot on your motherboard.
4. カードを挿入： Gently align the VEGA-3300-A0E0 card with the chosen PCIe slot and press down firmly until it is securely seated.
5. セキュアカード: Use the retention mechanism or screw to secure the card in place within the chassis.
6. クローズシャーシ: Close the computer chassis and reconnect all cables.

2. ドライバーとソフトウェアのインストール

After hardware installation, you will need to install the necessary drivers and software development kits (SDKs) to utilize the encoder card's full capabilities.

• ドライバーをダウンロード: Visit the official ADVANTECH support website for the VEGA-3300-A0E0 model to download the latest drivers and SDKs.
• ドライバーのインストール： Follow the provided installation instructions for the drivers. This typically involves running an executable file 画面の指示に従います。
• Install SDKs: Install the SDKs for FFmpeg and GStreamer if you plan to integrate the encoder with these multimedia frameworks. Refer to the SDK documentation for specific installation steps.
• システムの再起動: A system reboot may be required after driver installation to ensure proper recognition of the hardware.

操作手順

The VEGA-3300-A0E0 encoder card is designed for real-time video encoding. Its operation is primarily controlled through software applications utilizing its API and integration with multimedia frameworks like FFmpeg and GStreamer.

Basic Encoding Workflow:

1. 入力ソース： Connect your video input source (e.g., camera, video player) to the appropriate input ports on the VEGA-3300-A0E0 card.
2. ソフトウェア構成： Launch your encoding software or application that utilizes the VEGA-3300-A0E0's API.
3. Set Encoding Parameters: Configure the desired encoding parameters, such as resolution (4K or FHD), frame rate (60 fps), HEVC profile (Main 8, Main 10, Main 10 4:2:2), and bitrate.
4. Start Encoding: Initiate the encoding process within your software. The card will process the input video in real-time.
5. Output Stream: The encoded video stream will be available for output, typically over a network or saved to local storage, depending on your software configuration.

For detailed programming and integration instructions, refer to the specific API documentation and example code provided by ADVANTECH for FFmpeg and GStreamer.

メンテナンス

Proper maintenance ensures the longevity and optimal performance of your VEGA-3300-A0E0 encoder card.

• 環境条件: Operate the card within recommended temperature and humidity ranges. Avoid dusty environments.
• クリーニング： Periodically clean the card and surrounding area within the PC chassis using compressed air to remove dust buildup, especially from the heatsink and fan (if present). Ensure the system is powered off and unplugged before cleaning.
• ファームウェアの更新： Regularly check the ADVANTECH support website for firmware updates. Firmware updates can improve performance, add features, or resolve issues. Follow the provided instructions carefully when performing firmware updates.
• ソフトウェアアップデート: Keep your operating system, drivers, and encoding software up-to-date to ensure compatibility and optimal performance.

トラブルシューティング

This section addresses common issues you might encounter with the VEGA-3300-A0E0 encoder card.

一般的な問題と解決策:

• カードが検出されません:
  • カードが PCIe スロットに完全に装着されていることを確認します。
  • Verify that the necessary drivers are correctly installed. Check Device Manager (Windows) or lspci (Linux) to see if the card is recognized.
  • 可能であれば、別の PCIe スロットでカードを試してください。
• ビデオ入力/出力なし:
  • Check all video cable connections to ensure they are secure and correctly plugged into the card's ports.
  • Verify that the input source is active and providing a compatible signal.
  • Confirm that your encoding software is configured to use the correct input and output settings for the VEGA-3300-A0E0.
• Encoding Performance Issues:
  • Ensure your system meets the minimum requirements for the encoding tasks.
  • 不要なバックグラウンド アプリケーションを閉じて、システム リソースを解放します。
  • Check for driver or firmware updates for the encoder card.
  • Monitor the card's temperature to ensure it's not overheating, which can lead to throttling.

If you continue to experience issues, refer to the detailed troubleshooting guides available on the ADVANTECH support webサイトをご覧いただくか、テクニカル サポートにお問い合わせください。

仕様

保証とサポート

ADVANTECH products are manufactured to high quality standards and are backed by a limited warranty. For specific warranty terms and conditions applicable to your VEGA-3300-A0E0 encoder card, please refer to the warranty information included with your product packaging or visit the official ADVANTECH webサイト。

For technical support, driver downloads, firmware updates, and additional resources, please visit the ADVANTECH support portal:

www.advantech.com/support

When contacting support, please have your product model number (VEGA-3300-A0E0) and serial number ready.