M-Wave 881041
M-Wave Top Assist 2 メタリックマウントスタンド 取扱説明書
モデル: 881041
1. はじめに
This manual provides essential information for the safe and effective use of your M-Wave Top Assist 2 Metallic Mounting Stand. Please read this manual thoroughly before assembly and operation, and retain it for future reference.
The M-Wave Top Assist 2 repair stand is designed for bicycle maintenance and repair tasks. It offers a sturdy and adjustable platform for various types of bicycles, including e-bikes, with a maximum load capacity of 50 kg.
2. 安全情報
怪我や製品の損傷を防ぐために、常に次の安全上の注意事項を守ってください。
- Ensure the stand is placed on a stable, level surface before mounting a bicycle.
- 最大耐荷重50kgを超えないようにしてください。
- Always secure the bicycle firmly in the clamp 作業を実行する前に。
- Keep hands and fingers clear of moving parts, especially during height adjustment and clamping。
- スタンドに摩耗、損傷、緩んだ部品がないか定期的に点検してください。損傷している場合は使用しないでください。
- Keep children and pets away from the work area when the stand is in use.
- Do not use the stand for purposes other than its intended use.
3. パッケージ内容
パッケージにすべてのコンポーネントが含まれていることを確認します。
- 1 x M-Wave Top Assist 2 Repair Stand
- 取扱説明書(本書)

Image: The M-Wave Top Assist 2 Repair Stand as packaged in its retail box.
4. セットアップと組み立て
The M-Wave Top Assist 2 is designed for quick setup and folding. Follow these steps for assembly:
- 脚を展開する: Carefully unfold the base legs until they are fully extended and stable. Ensure the stand rests firmly on the ground.
- 高さの調整: Loosen the quick-release lever on the main vertical shaft. Extend the shaft to your desired working height. Securely tighten the quick-release lever to lock the height in place.

Image: The M-Wave Top Assist 2 Repair Stand in its fully assembled and extended position, ready for use.
- Cl の調整amp 角度: clamp head can rotate 360 degrees. Loosen the adjustment knob/lever near the clamp head to rotate it to the desired angle for holding your bicycle. Tighten the knob/lever firmly once the angle is set.

画像: クローズアップ view clのamp mechanism, showing the quick-release and rotation features.
5. 操作手順
Using your M-Wave Top Assist 2 stand for bicycle maintenance:
- Clを開くamp: Use the quick-release mechanism on the clamp to open the jaws wide enough to accommodate your bicycle's frame tube. The clamp is universally adjustable to various tube diameters.
- 自転車に乗る: Carefully lift your bicycle and position a suitable part of its frame (e.g., top tube, seat post) into the open jaws of the clamp. Ensure the bicycle is balanced before fully securing.
- Secure the Bicycle: 窓を閉じるamp jaws firmly around the bicycle frame using the quick-release lever. Ensure the bicycle is held securely and does not wobble. The clamp rotates 360 degrees, allowing optimal positioning for various repair tasks.
- Perform Maintenance: With the bicycle securely mounted, you can now perform your desired maintenance or repair tasks.
- Remove the Bicycle: Once finished, loosen the clamp quick-release lever and carefully remove the bicycle from the stand.
6.メンテナンスと保管
To ensure the longevity and optimal performance of your M-Wave Top Assist 2 stand:
- クリーニング: スタンドを拭いてamp cloth after use to remove dirt, grease, or debris. Avoid abrasive cleaners.
- 潤滑: Periodically apply a light lubricant to the moving parts, such as the quick-release mechanisms and height adjustment points, to ensure smooth operation.
- 検査: Regularly check all bolts, nuts, and quick-release levers to ensure they are tight and secure. Inspect the aluminum frame for any signs of damage or bending.
- ストレージ: The stand folds up in seconds for space-saving storage. Store it in a dry, clean environment away from extreme temperatures and direct sunlight.

Image: The M-Wave Top Assist 2 Repair Stand in its compact, folded configuration, ideal for storage or transport.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スタンドが不安定です。 | 脚が完全に伸びていないか固定されていない、表面が平らでない、過負荷である。 | Ensure legs are fully extended and locked. Move to a level surface. Do not exceed 50 kg load capacity. |
| Clamp does not hold bicycle securely. | Clamp not tightened enough; incorrect tube diameter. | Ensure the quick-release lever is fully tightened. Adjust the clamp to the appropriate tube diameter. |
| 高さ調整が難しい。 | Quick-release lever too tight; lack of lubrication; dirt in shaft. | Loosen the quick-release lever. Clean and lubricate the vertical shaft. |
8. 仕様
- モデル: M-Wave Top Assist 2
- モデル番号: 881041
- 材料: アルミニウム
- 色: メタリック
- 最大耐荷重: 50 kg (110 ポンド)
- 商品の重量: 約6kg(13.2ポンド)
- 製品寸法(長さ x 幅 x 高さ): 39.76 x 8.66 x 6.3インチ(折りたたみ時)
- 特別な機能: 360°回転Clamp, Universal Tube Diameter Adjustability, Quick Fold/Setup
- 国際コード: 887539033170
9. 保証とサポート
For warranty information or technical support regarding your M-Wave Top Assist 2 Metallic Mounting Stand, please contact M-Wave customer service or refer to the official M-Wave webサイトをご覧ください。サポートにお問い合わせの際は、モデル番号(881041)と購入証明書をご用意ください。
M-Wave Official Webサイト: www.m-wave.com (注:これはプレースホルダーです URL 具体的なサポートがないため URL 入力データに提供されました。
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.