Magene H603 心拍数モニター チェストストラップ ユーザーマニュアル

1. はじめに

The Magene H603 is a high-performance heart rate monitor designed for fitness tracking. It utilizes an advanced ECG processing circuit and a self-learning algorithm to provide accurate real-time heart rate data, minimizing interference from movement and sweat. The H603 features a comfortable split chest strap design and offers broad compatibility with ANT+ and Bluetooth devices.

This manual provides detailed instructions for setting up, operating, and maintaining your Magene H603 Heart Rate Monitor.

2. パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• Magene H603 心拍センサー (x1)
• 調節可能な伸縮性チェストストラップ（x1）
• CR2032 Battery (x1, pre-installed in sensor)

Image: Components included in the Magene H603 package: heart rate sensor, adjustable elastic strap, and a CR2032 battery.

3. セットアップ

3.1 胸部ストラップへのセンサーの取り付け

1. Moisten the electrode areas on the back of the chest strap with water or electrode gel to ensure good contact with your skin.
2. Attach the heart rate sensor to the two snap fasteners on the chest strap. Ensure it is securely fastened.

Image: The Magene H603 heart rate sensor connected to the split chest strap, ready for wear.

3.2 心拍モニターの装着

1. Place the chest strap around your chest, directly below your pectoral muscles.
2. Adjust the strap length to ensure a snug but comfortable fit. The sensor should be centered on your chest.
3. Ensure the moistened electrodes are in firm contact with your skin.

Image: A user wearing the Magene H603 heart rate monitor chest strap comfortably during exercise.

4. 操作手順

4.1 Powering On and Status Indicator

The Magene H603 automatically powers on when it detects a heart rate signal. A red LED light on the sensor indicates that the monitor is active and ready for use.

Image: The LED indicator on the Magene H603 sensor, which glows red when the device is ready to transmit data.

4.2 デバイスへの接続（ANT+およびBluetooth）

The H603 supports both ANT+ and Bluetooth 4.2 for stable data transmission. It can record two copies of data simultaneously: one via an ANT+ device and another via a Bluetooth application.

1. Bluetooth接続の場合:
   • スマートフォンまたは互換性のあるデバイスで Bluetooth が有効になっていることを確認してください。
   • Open your preferred fitness application (e.g., Zwift, Strava, Elite HRV).
   • Navigate to the sensor pairing or device connection settings within the app.
   • Select "Magene H603" from the list of available devices to pair.
2. ANT+接続の場合:
   • Ensure your ANT+ compatible device (e.g., Wahoo, Garmin cycling computer) is powered on.
   • Go to the sensor pairing menu on your ANT+ device.
   • The device should automatically detect the Magene H603. Select it to connect.

The H603 is compatible with a wide range of fitness devices and applications, including Wahoo, Zwift, Strava, and Elite HRV.

5. メンテナンス

5.1 チェストストラップのクリーニング

• 使用後は毎回、センサーを胸部ストラップから取り外してください。
• Rinse the chest strap under running water.
• Hang the strap to dry. Do not machine wash or tumble dry.
• Avoid using strong detergents or chemicals, as they may damage the electrodes.

5.2 電池の交換

The H603 uses a CR2032 coin cell battery. When the battery is low, the device's performance may be affected, or it may stop transmitting data.

1. Using a coin, twist the battery cover on the back of the sensor counter-clockwise to open it.
2. 古い CR2032 電池を取り外します。
3. 新しい CR2032 電池をプラス (+) 側を上に向けて挿入します。
4. Replace the battery cover and twist it clockwise to secure it. Ensure the O-ring seal is properly seated to maintain water resistance.

Image: Illustration of replacing the CR2032 battery in the Magene H603 heart rate sensor.

6。 トラブルシューティング

7. 仕様

Image: The Magene H603 sensor demonstrating its IP67 dustproof and waterproof capabilities.

8. 保証とサポート

Magene H603心拍モニターには、 2年間のメーカー保証. This warranty covers defects in materials and workmanship under normal use. Please note that human-caused damage is not covered under this warranty.

For technical support, warranty claims, or further inquiries, please contact Magene customer service through their official web製品を購入したサイトまたは小売店にお問い合わせください。