MAIMEIMI B09DP1G3DT

MAIMEIMI GPS Speedometer 85mm (3-3/8") Instruction Manual

Model: B09DP1G3DT

ブランド: MAIMEIMI

1. はじめに

This manual provides detailed instructions for the installation, operation, and maintenance of your MAIMEIMI 85mm GPS Speedometer. Designed for a wide range of applications including cars, tractors, trucks, boats, and marine vessels, this speedometer features a clear TFT screen, IP67 waterproof rating, and a wide 9-32VDC working voltage range. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. パッケージ内容

パッケージを開封したら、以下のアイテムがすべて含まれていることを確認してください。

  • 1 x GPS Speedometer (85mm / 3-3/8")
  • 1 x GPS Antenna (3-meter cable length)
  • 取扱説明書 x 1
Package contents including GPS speedometer, GPS antenna, and instruction manual

Image: Contents of the MAIMEIMI GPS Speedometer package.

3 製品の特徴

  • TFTスクリーンディスプレイ: Provides clear visibility of speed, odometer, trip meter, battery voltage, and course over ground (COG).
  • ワイドVoltage範囲: Operates on 9-32VDC, suitable for various vehicle types.
  • Waterproof & Anti-fogging: IP67 rated for water and fog resistance, ensuring reliable performance in challenging environments.
  • Multiple Unit Switching: Easily switch between kilometers per hour (km/h), miles per hour (mph), and knots (rounded to one decimal).
  • GPS信号の取得: Initial signal acquisition takes approximately 30 seconds, with faster connections under clear skies.
  • Odometer & Trip Meter: Odometer (0-999999km) is adjustable via the back button. Trip meter (0-999.9km) resets when power is off.
  • Orientation Pointer: Displays Course Over Ground (COG) for directional awareness.
詳細 view of the GPS speedometer display showing SOG, TRIP, ODO, Battery voltage, COG, and Orientation Pointer.

Image: Detailed display information of the GPS Speedometer.

GPS speedometer submerged in water, demonstrating its IP67 waterproof capability.

Image: The speedometer undergoing a waterproof test.

4. セットアップとインストール

Follow these steps for proper installation of your GPS Speedometer:

  1. 取り付け穴を準備します。 Open an 85mm (3 3/8") diameter hole in your panel. Ensure there is a 55mm (2 3/16") depth clearance behind the panel for the gauge body.
  2. Insert the Gauge: Carefully place the speedometer into the prepared hole.
  3. ゲージを固定する: Use the provided mounting ring to screw down and secure the gauge firmly in place.
  4. 配線を接続:
    • Connect the Black wire to Ground (-).
    • Connect the Red wire to 9-30VDC power supply.
  5. GPSアンテナを接続します: Plug the GPS antenna into the designated port on the back of the speedometer. The GPS antenna can be optionally mounted using 3M double-sided tape.
前面と背面 views of the GPS speedometer with dimensions: 97mm (3.81in) front diameter, 85mm (3.35in) body diameter, and 70mm (2.75in) depth.

Image: Front and back dimensions of the GPS Speedometer.

Wiring diagram for the GPS speedometer showing connections for ground and 9-30VDC power.

Image: Basic wiring diagram for the speedometer.

Diagram illustrating the installation process of the GPS speedometer into a panel.

Image: Step-by-step installation guide for the gauge.

5. 操作手順

Once installed and powered, the speedometer will begin searching for a GPS signal. After acquiring a signal, it will display speed and other data.

  • 単位切り替え: To change the speed unit (km/h, mph, or knots), press the button located on the back of the speedometer. The unit will cycle through the options and save automatically.
  • Odometer Adjustment: The odometer value can be adjusted using the button on the back.
  • トリップメーター: The trip meter automatically resets to zero when the power is turned off.
GPS speedometer display showing options to switch between km/h, MPH, and knots.

Image: Display showing selectable speed units.

Video: Demonstration of the 85mm GPS Speedometer, including unit switching and waterproof features.

6. メンテナンス

To ensure the longevity and optimal performance of your GPS Speedometer, follow these general maintenance guidelines:

  • Regularly clean the screen and bezel with a soft, damp 布。 研磨剤入りクリーナーは避けてください。
  • すべての配線接続が安全であり、腐食がないことを確認してください。
  • Periodically check the GPS antenna for any damage or obstruction to maintain signal integrity.
  • While the unit is IP67 waterproof, avoid prolonged submersion or high-pressure water jets.

7。 トラブルシューティング

If you encounter any issues with your GPS Speedometer, consider the following common solutions:

  • GPS信号なし: GPSアンテナがクリアであることを確認する view of the sky. Obstructions can block the signal. Allow up to 30 seconds for initial signal acquisition.
  • スピードリーディングの誤り: Verify that the correct unit (km/h, mph, knots) is selected. If the issue persists, ensure the GPS antenna is securely connected.
  • ディスプレイが動作しない: すべての電源接続が確実に行われ、正しい電圧が供給されていることを確認してください。tage(9-32VDC)。
  • ボタンが反応しない: Ensure the unit is clean and free from debris around the buttons.

これらの手順を試しても問題が解決しない場合は、カスタマー サポートに連絡してサポートを受けてください。

8. 仕様

仕様詳細
製品寸法3.82 x 3.78 x 2.2 インチ; 10.88 オンス
ワーキングVoltage9~32VDC
防水等級IP67
材料Stainless Steel, Plastic, Anti-Fogging Glass
速度範囲0~600 km/h
Odometer Range0-999999 km (adjustable)
Trip Meter Range0-999.9 km (resets on power off)
メーカーマイメイミ

9. 保証とサポート

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official MAIMEIMI webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.