ABB AD1NO-R-15m (2CSM222461R1000)

ABB AD1NO-R-15m Modular Device Switch User Manual

Model: AD1NO-R-15m (Reference: 2CSM222461R1000)

ブランド: ABB

1. はじめに

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

ABB AD1NO-R-15m Modular Device Switch, front view

図1: 前面 view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. 重要な安全上の注意事項

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • 設置およびメンテナンスは資格のある担当者のみが行う必要があります。
  • Disconnect power before installation, maintenance, or servicing to prevent electric shock.
  • すべての配線が地域および国の電気規格および規制に準拠していることを確認してください。
  • デバイスが破損していると思われる場合は操作しないでください。
  • このデバイスは乾燥した環境での屋内使用向けに設計されています。

3.製品オーバーview

The AD1NO-R-15m is an analog time switch with the following key features:

  • アナログダイヤル: For setting daily schedules.
  • 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
  • 1 Normally Open (NO) Channel: 1 つの電気回路を制御します。
  • パワーリザーブ: Maintains timekeeping for a specified duration during power interruptions.
  • モジュラー設計: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. セットアップとインストール

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

  1. 電源切断: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltageテスター。
  2. 取り付け: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
  3. 配線：
    • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
    • Connect the load wire from the output terminal of the time switch to the device you wish to control.
    • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
  4. 電力の回復: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. 操作手順

To set the time and program the switching schedule:

  1. 現在の時刻を設定: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
  2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
  3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages。

6. メンテナンス

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

  • クリーニング： Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
  • 検査： Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
  • 環境条件: 損傷を防ぐために、動作環境が指定された温度と湿度の範囲内であることを確認してください。

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7。 トラブルシューティング

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

問題考えられる原因解決
デバイスが切り替わらない電源なしCheck the circuit breaker or fuse. Ensure wiring connections are correct and secure.
デバイスが切り替わらない間違ったプログラミングRe-check the dial settings and ensure the correct segments are pushed in or pulled out for desired ON/OFF times.
デバイスが切り替わらない手動オーバーライド作動Set the operating mode switch to "AUTO" for programmed operation.
電源を切った後の時刻が正しくないtagePower reserve depleted or faultyAllow the device to charge its power reserve by keeping it connected to power. If the issue persists, contact customer support.

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. 技術仕様

  • モデル： AD1NO-R-15m
  • 部品番号: 2CSM222461R1000
  • メーカー: 図
  • タイプ： アナログタイムスイッチ
  • Switching Interval: 15 minutes
  • チャンネル: 1ノーマルオープン（NO）
  • パワーリザーブ: はい
  • 商品の重量: 約2.82オンス（80グラム）
  • 製品寸法: 約3.54 x 0.69 x 2.6インチ（90 x 17.5 x 66 mm）
  • 取り付けタイプ: DIN Rail (Wall Mount)
  • 含まれるコンポーネント: Modular device switch
  • 必要な電池: No (features internal power reserve)
  • ASIN: B09BP4PFMF
  • 最初に入手可能: 21年2024月XNUMX日

注：仕様は予告なく変更される場合があります。

9. 保証とサポート

保証情報

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。

カスタマーサポート

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webサイトまたは製品パッケージに記載されている連絡先情報を参照してください。

ABB公式 Webサイト： www.abb.com