1. はじめに
This manual provides comprehensive instructions for the installation, operation, and maintenance of your AMIO 01522 LED Daytime Running Lights. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. 安全情報
以下の安全上の注意事項を常に守ってください。
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical shock or short circuits.
- 手順が不明な場合は、資格のある専門家がインストールを実行する必要があります。
- いかなる場合も製品を改造しないでください。許可されていない改造は保証の対象外となり、安全上のリスクが生じる可能性があります。
- 湿気の侵入や電気的な問題を防ぐために、すべての接続が安全かつ適切に絶縁されていることを確認してください。
- Verify local regulations regarding the use of daytime running lights before installation.
3. パッケージ内容
The AMIO 01522 LED Daytime Running Lights package includes:
- 1x AMIO 01522 Set of LED Daytime Running Lights (Pair)
- 取り付けブラケットとハードウェア
- 配線ハーネス
- 取扱説明書（本書）
Figure 3.1: Contents of the AMIO 01522 package, showing the two LED daytime running lights and their retail box.
4. 仕様
| 特徴 | 詳細 |
|---|---|
| ライトタイプ | 導かれた |
| LEDの数 | 10ユニットあたりXNUMX |
| 形 | 広い |
| 長さ | 160ミリメートル |
| 身長 | 25ミリメートル |
| 幅 | 29 mm (base), 52 mm (overall) |
| ハウジング材質 | アルミニウム |
| 消費電力 | 11.52ワット |
| 光束 | 1000ルーメン |
| 色温度 | 5600 キロ |
| レンズ素材 | プラスチック |
| Mounting Side | フロント |
| ハウジングカラー | 黒 |
| LEDカラー | 白 |
| Illumination Lifespan | 20,000時間 |
| 認定資格 | E4, RCE87 |
| ユニバーサルフィット | はい |
| 湿気対策 | 水噴射から保護 |
Figure 4.1: Dimensional drawing of the AMIO 01522 LED Daytime Running Light, showing length (160mm), height (25mm), and width (29mm at base, 52mm overall).
5. セットアップとインストール
Follow these steps for proper installation of your AMIO 01522 LED Daytime Running Lights:
- 準備：
- 車両の電源がオフになっており、バッテリーが取り外されていることを確認してください。
- Identify a suitable mounting location on the front of your vehicle, ensuring the lights are visible and comply with local regulations. The lights are designed for front mounting.
- 取り付け面をよく清掃してください。
- ライトの取り付け：
図5.1: 前面 view of a single AMIO 01522 LED Daytime Running Light, showing the clear lens and LED array.
- Attach the provided mounting brackets to the back of each DRL unit using the supplied hardware.
- Securely mount the DRL units to your chosen location on the vehicle. Ensure they are firmly fixed and correctly oriented.
- 配線接続:
図5.2：背面 view of the AMIO 01522 LED Daytime Running Light, showing the integrated mounting bracket and the wiring harness with a connector.
- Connect the wiring harness from the DRL units to the vehicle's electrical system. Typically, DRLs are connected to a power source that activates when the ignition is on.
- The red wire usually connects to the positive (+) terminal (e.g., ignition switched 12V).
- The black wire usually connects to the negative (-) terminal or vehicle ground.
- Some DRL kits include a control module for automatic on/off functionality. Refer to the specific wiring diagram provided with your kit if applicable.
- Ensure all connections are waterproof and secure.
- テスト:
- 車両のバッテリーを再接続します。
- Turn on the vehicle's ignition to test if the DRLs illuminate correctly.
- Verify that both lights are working and properly aligned.
6. 操作手順
The AMIO 01522 LED Daytime Running Lights are designed for automatic operation:
- Once properly installed and wired, the DRLs will typically turn on automatically when the vehicle's ignition is switched on.
- They are intended to increase vehicle visibility during daylight hours.
- Depending on the wiring configuration, they may dim or turn off when the vehicle's main headlights are activated.
図 6.1: 拡大図 view of the AMIO 01522 LED Daytime Running Light lens, highlighting the E4 and RCE87 certification markings, indicating compliance with European standards.
7. メンテナンス
The AMIO 01522 LED Daytime Running Lights require minimal maintenance:
- クリーニング： 定期的にレンズを柔らかくてきれいな布で拭いてください。amp cloth to remove dirt and debris. Avoid abrasive cleaners or solvents that could damage the plastic lens.
- 検査： Regularly check the lights for any signs of damage, loose connections, or corrosion. Ensure the mounting remains secure.
- LED寿命： The LEDs have a long lifespan of approximately 20,000 hours and are not user-replaceable. If a unit fails, the entire unit should be replaced.
8。 トラブルシューティング
If you encounter issues with your AMIO 01522 LED Daytime Running Lights, refer to the following table:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| ライトが点灯しない。 | No power supply, loose connection, blown fuse, incorrect wiring. | Check all wiring connections for security. Verify power supply to the DRLs. Check vehicle's fuse box for any blown fuses. Ensure correct polarity (+/-). |
| ライトが1つ点灯していません。 | Faulty unit, loose connection to that specific light. | Inspect the wiring connection to the non-working light. If connections are secure, the unit may be faulty and require replacement. |
| ライトがちらついたり暗くなったりします。 | Unstable power supply, loose connection, voltage変動。 | Ensure stable 12V/24V power supply. Check for loose connections. Consult an automotive electrician if the issue persists. |
| レンズ内部の湿気。 | シールの破損、極端な温度変化。 | Small amounts of condensation can occur and usually dissipate. If significant moisture or water ingress is present, the seal may be compromised. Check for cracks or damage. |
9. 保証とサポート
AMIO products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
For technical support or further assistance, please contact AMIO customer service or your authorized dealer. Contact details can typically be found on the product packaging or the manufacturer's official webサイト。