Phanteks T30-120 High-Performance PWM Fan User Manual

1. はじめに

The Phanteks T30-120 fan is engineered for superior cooling performance in various computing environments. This fan features a robust Liquid Crystal Polymer (LCP) construction and offers flexible fan profiles to suit different operational needs, from silent computing to extreme performance. This manual provides essential information for the proper installation, operation, and maintenance of your T30-120 fan.

Image 1: Phanteks T30-120 Fan overview.

2 製品の特徴

• Reinforced Liquid Crystal Polymer (LCP) Material: Both the fan blades and frame are constructed from LCP, providing exceptional rigidity and durability. This material allows for tighter tolerances and enhanced performance.
• Versatile Fan Profiles: An integrated switch allows users to select between three distinct fan profiles: Hybrid, Performance, and Advanced, catering to silent, balanced, or extreme cooling requirements.
• Optimized Acoustic Performance: Designed to deliver efficient airflow with a lower frequency range, contributing to a quieter operation.
• 30mm Thickness: The fan's 30mm thickness, compared to standard 25mm fans, allows for a larger blade surface area, resulting in enhanced airflow and static pressure.
• Dual Vapo Bearing: Ensures silent and durable operation.
• 3-Phase Motor: Provides smooth and stable fan operation.
• Magnetic Levitation Plate: A contactless stabilizer for improved longevity and reduced friction.

Image 2: Illustration of Liquid Crystal Polymer (LCP) construction for enhanced rigidity and durability.

Image 3: Diagram detailing the PWM profile switch and its three modes: Hybrid, Performance, and Advanced.

3. パッケージ内容

パッケージにすべてのコンポーネントが含まれていることを確認します。

• 1x Phanteks T30-120 Fan
• 4x Fan Mounting Screws (M3, typically 36mm or 39mm length to accommodate 30mm thickness)
• 1x 500mm Extension Cable

Image 4: Phanteks T30-120 Single Fan.

4. インストール

Follow these steps to install your Phanteks T30-120 fan:

1. システムを準備する: コンピュータの電源を切り、電源から外します。PCケースを開けて、ファンの取り付け位置を確認します。
2. クリアランスを確認してください: The T30-120 fan has a 30mm thickness, which is 5mm thicker than standard 25mm fans. Ensure sufficient clearance in your desired mounting location (e.g., case fan mounts, radiator mounts) to avoid interference with other components.
3. ファンを取り付ける: Position the fan in the desired location. Use the provided mounting screws to secure the fan to the case or radiator. Ensure the fan is oriented correctly for optimal airflow (intake or exhaust).
4. 接続電源： Connect the fan's 4-pin PWM connector to an available 4-pin fan header on your motherboard or fan controller. If the cable length is insufficient, use the provided 500mm extension cable.
5. Set Fan Profile: Locate the small switch on the side of the fan frame. This switch allows you to select one of three fan profiles: Hybrid, Performance, or Advanced. Refer to Section 5 for details on each mode. Set the desired profile before closing your case.
6. ケースを閉じて電源を入れます: Once the fan is securely mounted and connected, close your PC case, reconnect the power, and power on your system.

5. 操作

The Phanteks T30-120 fan features a PWM profile switch that allows you to select between three operational modes:

• Hybrid Mode (Up to 1200 RPM): Designed for ultimate silence. In this mode, the fan can stop completely (0 RPM) when the PWM signal is below 50%, providing passive cooling for minimal noise.
• Performance Mode (Up to 2000 RPM): Recommended for a balanced operation between cooling performance and noise levels. This mode offers efficient cooling suitable for most general computing and gaming scenarios.
• Advanced Mode (Up to 3000 RPM): Provides extreme cooling performance for demanding tasks and high-heat environments. This mode maximizes airflow and static pressure at higher RPMs.

Adjust the fan profile switch on the fan frame to select your preferred mode. The fan speed within each mode will then be controlled by the PWM signal from your motherboard or fan controller.

6. メンテナンス

定期的なメンテナンスにより、ファンの最適なパフォーマンスと寿命が確保されます。

• ほこりの除去: ファンの羽根とフレームの埃は、圧縮空気または柔らかいブラシを使用して定期的に取り除いてください。清掃の前に、ファンの電源を切り、接続ケーブルを外してください。
• 検査： Check for any obstructions around the fan blades or unusual wear on the cables.
• 液体を避ける: Do not use liquid cleaners directly on the fan.

7。 トラブルシューティング

If you encounter issues with your Phanteks T30-120 fan, refer to the following common troubleshooting steps:

• ファンが回転しない:
  • 4 ピン PWM コネクタがマザーボードまたはファン コントローラにしっかりと接続されていることを確認します。
  • Check your motherboard's BIOS/UEFI settings or fan control software to ensure the fan header is enabled and receiving a sufficient PWM signal.
  • In Hybrid Mode, the fan may stop at low PWM signals (below 50%). This is normal operation for silent performance. Increase the PWM signal or switch to Performance/Advanced mode if continuous spinning is desired.
• 過度の騒音:
  • Verify the fan is securely mounted and not vibrating against the case or other components.
  • ファンブレードを妨害するケーブルやゴミがないか確認します。
  • Ensure the fan profile switch is set to a lower RPM mode (e.g., Hybrid or Performance) if noise is a concern. Advanced Mode operates at higher RPMs and will naturally produce more sound.
• 冷却性能が低い：
  • Confirm the fan is oriented correctly for desired airflow (intake or exhaust).
  • Ensure the fan profile switch is set to a higher RPM mode (e.g., Performance or Advanced) for increased cooling.
  • Clean any dust accumulation on the fan blades or radiator fins.
• Physical Fitment Issues:
  • The T30-120 fan is 30mm thick. If it does not fit, verify your case or radiator has adequate clearance for this dimension.

8. 仕様

9. 保証とサポート

Phanteks stands behind the quality of its products. The T30-120 fan comes with a 6年間保証 購入日から、通常使用における製造上の欠陥および材料の欠陥をカバーします。

Image 5: Phanteks 6-year warranty information.

For technical support, warranty claims, or further assistance, please visit the official Phanteks webご購入いただいたサイトをご覧いただくか、カスタマーサービス部門にお問い合わせください。保証の有効性を確認するため、購入証明書を保管してください。