Weytoll T-100

Weytoll T-100 Portable Airbrush Air Compressor User Manual

Model: T-100 | Brand: Weytoll

1. はじめに

This manual provides instructions for the safe and efficient operation, setup, and maintenance of your Weytoll T-100 Portable Airbrush Air Compressor. This professional airbrush air compressor kit features a special non-oil type design, ensuring stable fluid output. It is designed for a wide range of applications, including makeup, model making, cake decorating, tattoos, and nail art. The compact and portable design makes it suitable for various spray-painting tasks, offering an adjustable pressure range from 0 to 25 PSI.

Weytoll T-100 Portable Airbrush Air Compressor with airbrush and hose

Figure 1: Weytoll T-100 Portable Airbrush Air Compressor with connected airbrush and hose.

2. 安全情報

Please read and understand all safety instructions before operating the air compressor. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

  • 電気安全: 電源がボリュームと一致していることを確認してくださいtage specified on the compressor. Do not operate the compressor with a damaged cord or plug. Keep the power cord away from heat, oil, sharp edges, or moving parts.
  • 換気: Operate the compressor in a well-ventilated area. Do not block the air vents.
  • Eye and Respiratory Protection: Always wear appropriate eye protection (safety glasses) and a respirator or mask when operating an airbrush to protect against paint fumes and overspray.
  • プレッシャー: The compressor operates at a maximum pressure of 25 PSI. Do not attempt to exceed this pressure or modify the pressure relief valve.
  • 可燃性物質: Do not spray flammable or combustible materials near open flames, pilot lights, or other ignition sources. Ensure adequate ventilation when using such materials.
  • 子供とペット: Keep children and pets away from the operating area. This device is not a toy.
  • ストレージ: コンプレッサーは、子供の手の届かない、乾燥した安全な場所に保管してください。

3. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

  • 1 x Air Compressor (Model T-100)
  • ペンスタンド×1
  • 1 x Hose (1.8 meters)
  • 取扱説明書 x 1

4. セットアップ

Follow these steps to set up your Weytoll T-100 Airbrush Air Compressor:

  1. コンポーネントを解凍します: すべての品目をパッケージから慎重に取り出します。
  2. Place Compressor: Position the air compressor on a stable, flat surface in a well-ventilated area.
  3. Attach Pen Stand: Insert the included pen stand into the designated slot on top of the compressor. This provides a convenient holder for your airbrush when not in use.
  4. ホースを接続します: Connect one end of the 1.8-meter air hose to the air outlet port on the compressor. Ensure a secure, hand-tight connection.
  5. Connect Airbrush: Connect the other end of the air hose to your airbrush. Ensure this connection is also secure.
  6. 電源接続: Plug the power adapter into the compressor's power input port, then plug the adapter into a suitable electrical outlet.
Weytoll T-100 Air Compressor with air outlet and power input ports

図2:背面 view of the compressor showing air outlet and power input connections.

1.8 meter air hose for airbrush compressor

Figure 3: The 1.8-meter air hose included with the compressor.

5. 操作手順

コンプレッサーをセットアップしたら、次の手順に従って操作します。

  1. 電源オン: Press the red power button located on the top of the compressor to turn it on. The compressor will begin to generate air pressure.
  2. 圧力調整: The compressor provides an output pressure range from 0 to 25 PSI. The pressure is automatically regulated within this range. No manual adjustment knob is present; the compressor maintains a stable output suitable for various airbrushing tasks.
  3. エアブラシを準備する: Fill your airbrush cup with the desired medium (paint, makeup, etc.).
  4. スプレーを開始します: Hold the airbrush at an appropriate distance from your working surface and activate the airbrush trigger to begin spraying. Practice on a scrap surface to get accustomed to the flow and pressure.
  5. 用途: This compressor is suitable for a variety of applications including:
    • ボディアート
    • 塗装修理
    • ネイルアート
    • ケーキデコレーション
    • Model Making
    • Commercial Arts
    • タトゥー
  6. 電源を切る: When finished, press the red power button again to turn off the compressor. Disconnect the power adapter from the wall outlet.
Diagram showing various applications for the airbrush compressor including body art, paint repair, nail art, cake decorating, model making, commercial arts, and tattoos.

Figure 4: Scope of application for the Weytoll T-100 Airbrush Air Compressor.

6. メンテナンス

適切なメンテナンスを行うことで、エアコンプレッサーの寿命が長くなり、最適なパフォーマンスが確保されます。

  • Cleaning the Airbrush: Always clean your airbrush thoroughly after each use to prevent clogging and ensure smooth operation. Follow the cleaning instructions provided with your specific airbrush model.
  • コンプレッサーのクリーニング: Wipe the exterior of the compressor with a clean, damp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
  • Non-Oil Design: The Weytoll T-100 features a special non-oil type design, meaning it does not require lubrication. Do not attempt to add oil to the compressor.
  • エアフィルター: Periodically check the air intake filter (if accessible) for dust and debris. Clean or replace as necessary to maintain optimal airflow.
  • ストレージ: Store the compressor and airbrush in a clean, dry environment when not in use. Disconnect the hose and power cord for long-term storage.

7。 トラブルシューティング

If you encounter issues with your air compressor, refer to the following troubleshooting guide:

問題考えられる原因解決
コンプレッサーが作動しないNo power supply; Damaged power cord/adapterEnsure power adapter is securely plugged into compressor and wall outlet. Check for power at the outlet. Inspect power cord for damage.
No air output or low pressureHose not connected properly; Airbrush clogged; Compressor air intake blockedCheck all hose connections for tightness. Clean the airbrush thoroughly. Ensure compressor air intake is clear of obstructions.
一貫性のないスプレーパターンAirbrush nozzle clogged; Paint too thick; Air pressure too lowClean airbrush nozzle. Thin paint to appropriate consistency. Ensure compressor is running and connections are secure.
Compressor runs continuously/loudlyNormal operation; Air leak in systemThe compressor may run continuously to maintain pressure. Check all connections for air leaks if noise is excessive or pressure is not building.

8. 仕様

Detailed technical specifications for the Weytoll T-100 Airbrush Air Compressor:

仕様価値
モデルT-100
出力巻tage12ボルト
Zero-load Current<1.0A
Air Flow Capacity (Gasflow)10 LPM (リットル/分)
Maximum Operating Pressure (Gaspressure)25 PSI (ポンド/平方インチ)
ホース長さ1.8メートル
商品サイズ115 * 118 * 59 mm(4.53 * 4.65 * 2.32インチ)
アイテム重量570 g (1.26 ポンド)
騒音レベル40デシベル
材料プラスチック
電源コード式電気
特集ポータブル
Dimensions of the Weytoll T-100 Airbrush Air Compressor: 115mm, 118mm, 59mm

Figure 5: Dimensions of the Weytoll T-100 Airbrush Air Compressor.

9. 保証とサポート

保証情報やテクニカルサポートについては、ご購入時に付属のマニュアルをご参照いただくか、メーカーに直接お問い合わせください。ご購入の証明として、ご購入時のレシートを保管してください。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.