Recessed Power Strip with USB Ports User Manual

製品終了view

This package includes two distinct recessed power strips designed for convenient power access in various settings such as desks, countertops, or furniture. Each unit provides AC outlets and USB charging ports, offering a versatile charging solution while maintaining a clean, organized appearance.

The bundle contains:

• One (1) Recessed Power Strip with 2 AC Outlets and 2 USB-A Ports.
• One (1) Recessed Power Strip with 2 AC Outlets, 1 USB-A Port, and 1 USB-C Port (with PD 20W fast charging).

画像: 上view of the two recessed power strips included in the package.

安全情報

Please read all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• 注意：感電の危険があります。 開いていません。 内部にはユーザーが修理できる部品はありません。
• 屋内使用のみ。水や過度の湿気にさらさないでください。
• デバイスの最大電気定格を超えないでください。
• お子様の手の届かない場所に保管してください。
• Ensure the power strip is properly installed and secured before connecting any devices.
• 電源コードやプラグが破損している場合は使用しないでください。

セットアップとインストール

These recessed power strips are designed for flush-mount installation into a surface such as a desk, countertop, or cabinet. Installation requires cutting a precise opening in the desired surface.

必要なツール（含まれていません）：

• 巻尺または定規
• 鉛筆またはマーカー
• Jigsaw or appropriate cutting tool for your surface material
• Screwdriver (for securing the unit, screws not included)

インストール手順:

1. 測定とマーク: Carefully measure the required cut-out dimensions for the specific power strip you intend to install.
   • For the 2 Outlets & 2 USB-A Ports unit: Approximately 3.8 inches (L) x 1.6 inches (H) x 1.7 inches (W).
   • For the 2 Outlets & 1 USB-A and 1 USB-C Ports unit: Approximately 5.20 inches (L) x 1.88 inches (W) x 1.5 inches (H).

   Note: It is recommended to draw the cut size on a piece of cardboard first and test the fit before cutting your furniture.

2. 開口部をカットします。 Using a jigsaw or suitable cutting tool, carefully cut the marked rectangular opening in your desired surface. Ensure the cut is clean and precise.
3. Insert the Power Strip: Gently insert the recessed power strip into the cut opening. The flange of the power strip should sit flush with the surface.
4. ユニットを固定する: Once the power strip is in place, secure it using appropriate screws (not included) through the designated mounting holes. Ensure it is firmly seated and does not wobble.
5. 電源に接続: Route the 6.56 ft extension power cord to a standard wall outlet and plug it in.

Image: Illustration of the thin flat plug design, allowing the power strip to fit easily behind furniture like beds and sofas.

画像: Example of the recessed power strip installed flush into a wooden desk surface.

Image: The power strip integrated into a side table, providing convenient charging access.

操作手順

Once installed and connected to a power source, the recessed power strip is ready for use.

ACコンセントの使用:

Plug your electronic devices into the standard 2-prong or 3-prong AC outlets. Each power strip provides two AC outlets.

USB充電ポートの使用:

Connect your USB-powered devices (smartphones, tablets, etc.) to the appropriate USB ports.

• USB-Aポート： Both power strips include USB-A ports for standard USB charging.
• USB-Cポート（PD 20W）： The specific power strip with a USB-C port supports Power Delivery (PD) 20W fast charging for compatible devices. Use a USB-C to USB-C cable or USB-C to Lightning cable for optimal fast charging.

Image: Demonstrating fast charging a smartphone using the PD 20W USB-C port.

メンテナンス

To ensure the longevity and safe operation of your recessed power strip, follow these maintenance guidelines:

• クリーニング： 清掃する前に、電源タップを壁のコンセントから抜いてください。表面を拭く際は、柔らかく乾いた布を使用してください。液体洗剤や研磨剤は使用しないでください。
• 検査： Periodically inspect the power cord and the unit for any signs of damage, fraying, or loose connections. If any damage is observed, discontinue use immediately.
• 環境： Ensure the installation environment remains dry and free from excessive dust or debris.

トラブルシューティング

If you encounter issues with your recessed power strip, please refer to the following common troubleshooting steps:

• コンセント/USBポートに電力が供給されない:
  • Ensure the power strip's main plug is securely inserted into a functioning wall outlet.
  • Check the wall outlet by plugging in another known working device.
  • Verify that the circuit breaker for the wall outlet has not tripped.
• USB経由で充電されないデバイス:
  • Ensure the USB cable is securely connected to both the device and the power strip's USB port.
  • ケーブルに欠陥がないか確認するため、別の USB ケーブルを試してください。
  • Test with a different USB device to confirm the port's functionality.
  • For fast charging, ensure your device and cable are compatible with PD 20W.
• 取り付け後のゆるいフィット:
  • Ensure the mounting screws (if used) are tightened appropriately.
  • Verify that the cut-out dimensions match the power strip's specifications.

これらの手順を試しても問題が解決しない場合は、カスタマー サポートにお問い合わせください。

仕様

Image: Detailed specifications for the power strip unit featuring USB-C and USB-A ports.

Image: Detailed specifications for the power strip unit featuring two USB-A ports.

保証とサポート

For warranty information or technical support, please refer to the product packaging or contact the manufacturer directly. You can also visit the official Kungfuking store on Amazon for more information and support resources.

Visit the Kungfuking Store on Amazon