ATDAWN Light Up Deer Family Christmas Yard Decoration

導入

This manual provides essential instructions for the safe and proper assembly, operation, and maintenance of your ATDAWN Light Up Deer Family Christmas Yard Decoration. Please read this manual thoroughly before use and retain it for future reference.

安全情報

• 屋外専用です。
• Unplug the decoration during inclement weather conditions, such as heavy rain, snow, or strong winds.
• Keep the product away from children and flammable materials.
• すべての電気接続が安全であり、湿気から保護されていることを確認してください。
• 製品の改造や修理は行わないでください。サポートが必要な場合は、カスタマーサポートにお問い合わせください。

パッケージ内容

組み立てを始める前に、すべてのコンポーネントが揃っていることを確認してください。

• 3 x Deer Bodies (Male, Female, Fawn)
• Pre-installed LED Light Strings
• 9 x Metal Stakes
• プラスチック製ケーブルタイ8個
• Screws & Nuts for assembly

Image: Components included in the ATDAWN Light Up Deer Family set, showing the metal frames, stakes, and cable ties.

セットアップ手順

Follow these steps to assemble your deer decoration:

1. Unfold the Deer: Carefully remove each deer body from the packaging. Lay each flat piece as shown in the assembly diagrams.
2. ヘッドを調整する: For the male deer, gently adjust the head and antlers to the desired position. Ensure the pre-installed LED light strings are not pinched or damaged.
3. 固定ネジ: Use the provided screws and nuts to connect the body sections of each deer. Tighten them securely to ensure stability.
4. Position the Reindeer: Place the assembled deer in your desired outdoor location (yard, lawn, driveway, or porch).
5. Install the Stands: Insert the metal stakes into the bottom frame of each deer. Use the plastic cable ties to further secure the deer to the ground, especially in windy conditions, to prevent tipping.

Image: Visual guide demonstrating the assembly process for the deer decorations.

Image: Diagram illustrating the dimensions of the male, female, and fawn deer figures.

アセンブリビデオ

Video: A seller-provided video demonstrating the assembly of a similar set of light-up reindeer decorations.

操作手順

Once assembled and securely placed, connect the power cord to a suitable outdoor electrical outlet. The LED lights will illuminate, creating a festive display. Ensure the outlet is weather-protected.

Image: The ATDAWN Light Up Deer Family decoration glowing brightly in a snowy outdoor setting.

Image: The deer family decoration enhancing an outdoor Christmas display.

製品デモビデオ

ビデオ: 販売者が提供するビデオショーasing the illuminated Christmas deer decorations.

メンテナンス

• クリーニング： To clean, gently wipe the deer with a soft, damp 布で拭いてください。強力な化学薬品や研磨剤入りの洗剤は使用しないでください。
• ストレージ： The 2D design allows for space-saving storage. Disassemble the deer by reversing the setup steps and store them in their original packaging or a dry, protected area to prevent damage.
• ライトの交換: If any LED lights fail, refer to the product packaging for information on replacement bulbs, if applicable.

トラブルシューティング

• ライトが点灯しない:
  • 電源コードが機能しているコンセントにしっかりと差し込まれているかどうかを確認します。
  • Inspect the entire length of the light string for any broken bulbs or loose connections.
  • 電源がアクティブであることを確認します。
• Decoration Instability:
  • Ensure all metal stakes are fully inserted into the ground.
  • Use additional plastic cable ties to secure the deer to fixed objects or additional stakes if necessary, especially in high-wind areas.
  • Verify that all screws and nuts used during assembly are tightened.

仕様

保証とサポート

For warranty information or technical support, please refer to the product packaging or contact the seller directly. Keep your proof of purchase for any warranty claims.