Dynaudio Emit 25C Center Channel Speaker User Manual

1. はじめに

The Dynaudio Emit 25C is a dedicated center channel speaker designed for multi-channel home theater systems. It plays a crucial role in delivering clear dialogue and central audio elements, ensuring an immersive listening experience. The Emit 25C integrates seamlessly with other Emit series speakers, providing consistent sound quality across your setup.

This speaker features Dynaudio's proprietary Magnesium Silicate Polymer (MSP) woofers and a high-quality soft-dome tweeter, engineered for precise sound reproduction and dynamic performance. This manual provides essential information for the proper setup, operation, and maintenance of your Emit 25C speaker.

フロント view of the Dynaudio Emit 25C Center Channel Speaker, showcasing the two Magnesium Silicate Polymer (MSP) woofers flanking the soft-dome tweeter.

2. 安全情報

• スピーカーを操作する前にすべての説明書をお読みください。
• スピーカーを水、湿気、または極端な温度にさらさないでください。
• 過熱を防ぐために、スピーカーの周囲に適切な換気を確保してください。
• Use only speaker cables of appropriate gauge and quality.
• Do not attempt to open or service the speaker yourself. Refer all servicing to qualified personnel.
• スピーカーを強い磁場から遠ざけてください。

3. 箱の中身

Upon unpacking your Dynaudio Emit 25C, please verify that all components are present:

• 1 x Dynaudio Emit 25C Center Channel Speaker
• ドキュメント（ユーザーマニュアル、保証情報）

不足または破損した品目がある場合は、すぐに販売店にご連絡ください。

4. セットアップ

4.1 スピーカーの配置

Optimal placement of the center channel speaker is crucial for clear dialogue and a cohesive soundstage. Position the Emit 25C directly above or below your television or projection screen, centered horizontally with your main left and right speakers. Ensure the speaker is at or near ear level when seated in your primary listening position.

Maintain a clear line of sight between the speaker and the listening area, avoiding obstructions. The Emit 25C includes magnetically attached black front grilles, which can be used for aesthetic preference or removed for a more open sound. Foam plugs are also provided to adjust the bass performance to best suit its position in your room, especially if placed close to a wall or in a cabinet.

フロント view of the Dynaudio Emit 25C Center Channel Speaker with its magnetically attached black fabric grille in place.

4.2 接続

Connect the Emit 25C to the center channel output of your AV receiver or amplifier using high-quality speaker cables. Ensure correct polarity: connect the positive (+) terminal on the speaker (usually red) to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker (usually black) to the negative (-) terminal on your amplifier. Incorrect polarity can result in poor sound quality and phase issues.

Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wires. Twist the bare wire strands tightly. Unscrew the binding post caps on the speaker and amplifier, insert the bare wire into the hole, and tighten the caps securely to ensure a firm connection. Avoid stray wire strands that could short-circuit the amplifier。

後方 view of the Dynaudio Emit 25C Center Channel Speaker, showing the bass reflex port and the high-quality binding posts for speaker cable connection.

5.運用

Once connected, your Dynaudio Emit 25C speaker is ready for operation. Power on your AV receiver or amplifier and select the appropriate input source. Adjust the volume to a comfortable listening level. For optimal performance, refer to your AV receiver's manual for speaker calibration settings, including speaker size (typically 'Small' for center channels with a subwoofer, or 'Large' if running full-range without a subwoofer), crossover frequency, and channel levels.

Allow a break-in period for new speakers. The drivers will perform optimally after several hours of use.

6. メンテナンス

To maintain the appearance and performance of your Dynaudio Emit 25C speaker, follow these simple guidelines:

• クリーニング： Dust the cabinet and grille with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• グリルのお手入れ: If the grille becomes dusty, gently vacuum it with a soft brush attachment.
• ドライバーケア: Avoid touching the speaker drivers (woofers and tweeter) as this can cause damage.
• 配置: スピーカーの上に重い物を置かないでください。

7。 トラブルシューティング

If you encounter issues with your Emit 25C speaker, refer to the following common troubleshooting steps:

• 音が出ない:
  • スピーカーとスピーカー本体の両方のスピーカーケーブルの接続を確認してください。 amplifier/receiver. Ensure they are secure and correctly polarized (+ to + and - to -).
  • あなたの amp受信機の電源がオンになっており、正しい入力ソースが選択されています。
  • Ensure the center channel output is enabled and not muted in your amp送信者/受信者の設定。
• 歪んだ音:
  • 音量レベルを下げてください amplifier/receiver. Distortion often occurs when the ampライターがオーバードライブされています。
  • スピーカー ケーブルの接続部に緩みやショートがないか確認します。
  • Ensure the source audio is not distorted. Try a different audio source.
  • Verify that the speaker impedance settings on your amplifier/receiver match the speaker's specifications (if applicable).
• アンバランスサウンド:
  • Check the balance and channel level settings on your ampリファイア/レシーバー。
  • Ensure speaker placement is symmetrical relative to the listening position.

If these steps do not resolve the issue, please contact Dynaudio customer support or your authorized dealer for further assistance.

8. 仕様

9. 保証とサポート

Your Dynaudio Emit 25C Center Channel Speaker is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or warranty claims, please contact your authorized Dynaudio dealer or visit the official Dynaudio webカスタマー サービス連絡先情報のサイト。

Retain your proof of purchase for warranty purposes.