導入
This manual provides essential information for the safe and efficient operation of your TTI 18-Volt Ryobi Charger, model PCG002. Please read this manual thoroughly before use and retain it for future reference. This charger is designed exclusively for Ryobi 18-Volt ONE+ batteries.
安全情報
警告：
- To reduce the risk of injury, electric shock, fire, or damage, always refer to the operator's manual for the correct size, type, and number of batteries to be charged. Charging other types of batteries may result in bursting, causing personal injury and damage.
- This charger is designed for dry indoor use only. Do not expose to rain or wet conditions.
- If the power cord becomes damaged or defective, immediately discontinue use and dispose of the charger responsibly. Do not attempt to repair a damaged cord.
- Always ensure the charger is disconnected from the power source before performing any maintenance or when not in use.
製品終了view
The TTI 18-Volt Ryobi Charger PCG002 is designed to efficiently charge Ryobi 18-Volt ONE+ batteries. It features indicator lights to communicate charging status and a maintenance mode to optimize battery performance. The charger is compact and includes keyholes for convenient wall mounting.
画像1: The TTI 18-Volt Ryobi Charger PCG002, showing its lime green and black housing, connected to its power adapter.
画像2: フロント view of the Ryobi PCG002 charger, highlighting the "RYOBI ONE+" branding and the array of charging status indicator lights.
設定
- 開梱: Remove the charger from its packaging. Ensure all components are present and undamaged. The package includes the charger unit only; batteries are sold separately.
- 配置: Place the charger on a stable, dry, and non-flammable surface indoors. Ensure adequate ventilation around the charger.
- 電源接続: Plug the charger's power cord into a standard 120V AC electrical outlet. The charger is designed for corded-electric operation.
- 取り付け（オプション）: The charger features keyholes on its underside, allowing it to be mounted on a wall or workbench for convenient storage and access. Ensure mounting hardware is appropriate for the surface and can support the charger and a battery.
画像3: Underside of the Ryobi PCG002 charger, displaying the model number (PCG002), electrical specifications, and the keyholes for wall mounting.
操作手順
Follow these steps to charge your Ryobi 18-Volt ONE+ batteries:
- 電池を挿入します: Align the battery with the charging port on the charger. Slide the battery onto the charger until it clicks securely into place.
- 充電ステータスの監視: The charger features indicator lights that provide feedback on the battery's charging status. Refer to the table below for an explanation of the indicator light patterns.
- バッテリーを取り外します: Once the battery is fully charged (indicated by the lights), press the battery release latches (if present on the battery) and slide the battery off the charger.
画像4: トップダウン view of the Ryobi PCG002 charger, showing the battery insertion slot and the warning label.
インジケーターライト
The charger's indicator lights provide visual cues regarding the battery's status:
| ライトパターン | 状態 |
|---|---|
| 緑色 | バッテリーは完全に充電されています。 |
| 点滅する緑 | バッテリーは充電中です。 |
| ソリッドレッド | Battery is too hot or too cold to charge. The charger will enter maintenance mode or wait until the battery reaches an appropriate temperature. |
| 赤色点滅 | Battery is defective or there is a charging error. Remove the battery and try another. If the issue persists, the battery may need replacement. |
The charger also features a メンテナンスモード which conditions batteries stored on the charger for peak performance. This mode automatically engages as needed.
メンテナンス
- クリーニング： Disconnect the charger from the power outlet before cleaning. Use a dry, soft cloth to wipe the exterior of the charger. Do not use water or chemical cleaners.
- ストレージ： Store the charger in a cool, dry, indoor location, away from direct sunlight and moisture.
- コード検査： Regularly inspect the power cord for any signs of damage, such as cuts, fraying, or exposed wires. If damage is found, discontinue use immediately and dispose of the charger responsibly.
トラブルシューティング
充電器で問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Charger lights do not illuminate when plugged in. | No power to the outlet; charger not properly plugged in; faulty charger. | Check the power outlet with another device. Ensure the charger is fully plugged into the outlet. If still no power, the charger may be faulty. |
| Battery does not charge (Flashing Red light). | Battery is defective; battery is too hot/cold; improper battery insertion. | Remove and re-insert the battery, ensuring it is seated correctly. Allow the battery to reach room temperature if it's too hot or cold. Try charging a different Ryobi 18-Volt ONE+ battery to determine if the issue is with the battery or the charger. |
| 充電が遅いです。 | バッテリーの状態、周囲温度。 | Ensure the battery is within optimal charging temperature range. Older or heavily used batteries may take longer to charge. |
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | PCG002 |
| ブランド | TTI (Ryobi) |
| 入力ボリュームtage | 120V〜60Hz 60W |
| 出力巻tage | 18ボルト |
| 製品寸法 | 6.5 x 3.5 x 3 インチ (16.5 x 8.9 x 7.6 cm) |
| アイテム重量 | 15.2オンス（0.43 kg） |
| 色 | Black, Lime Green |
| 電源 | コード付き-電気 |
保証とサポート
For warranty information or technical support regarding your TTI 18-Volt Ryobi Charger PCG002, please refer to the documentation included with your original purchase or visit the official Ryobi webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。
For additional assistance, you may contact TTI customer service. Contact details are typically available on the manufacturer's webサイトまたは製品パッケージに記載されています。
メーカー: 翻訳
Webサポートサイト： www.ryobitools.com