HURRISE HURRISE1twhz4brp72056

HURRISE 4-Bottle Rotating Liquor Dispenser Instruction Manual

Model: HURRISE1twhz4brp72056

1. はじめに

This manual provides comprehensive instructions for the safe and effective use of your HURRISE 4-Bottle Rotating Liquor Dispenser. Designed for precise measurement and convenient dispensing, this unit is suitable for various settings. Please read these instructions thoroughly before installation and operation to ensure optimal performance and longevity of the product.

2. 安全情報

  • Ensure the dispenser is securely mounted to a stable surface (wall or shelf) before attaching any bottles.
  • Do not overload the dispenser beyond its intended capacity.
  • お子様の手の届かない場所に保管してください。
  • Use caution when handling glass bottles to prevent breakage.
  • Clean the dispenser regularly as per the maintenance instructions to prevent residue buildup.

3. パッケージ内容

開梱時にすべてのコンポーネントが揃っていて損傷がないことを確認します。

  • 1 x HURRISE 4-Bottle Rotating Liquor Dispenser unit
  • 取り付け金具（ネジ、アンカー）

Note: Liquor bottles are not included.

4. セットアップとインストール

The dispenser can be mounted on a wall or shelf. Choose a location that is sturdy and can support the weight of the dispenser with four full bottles.

4.1 Mounting the Dispenser

  1. 場所を選択してください: Identify a suitable wall stud or a solid shelf surface for mounting.
  2. 掘削ポイントをマークする: Hold the dispenser's mounting bracket against the desired surface. Use a pencil to mark the positions for drilling. Ensure the dispenser is level.
  3. ドリル穴: 印を付けた位置に下穴を開けます。スタッドのない乾式壁に取り付ける場合は、適切な壁アンカーを使用してください。
  4. セキュアディスペンサー: Attach the dispenser to the wall or shelf using the provided screws. Ensure it is firmly secured and does not wobble.
後方 view of the HURRISE 4-Bottle Rotating Liquor Dispenser showing mounting points.
画像4.1：リア view of the dispenser's mounting bracket. This image illustrates the back of the dispenser, highlighting the points where it should be attached to a wall or shelf using screws.
トップ view of the HURRISE 4-Bottle Rotating Liquor Dispenser showing bottle holders.
画像4.2: 上 view of the dispenser with bottle holders. This image displays the upper arms and bottle cradles where liquor bottles are inverted and secured into the dispensing mechanism.

4.2 Attaching Bottles

  1. Remove the cap from your liquor bottle.
  2. Carefully invert the bottle and insert its neck into one of the dispenser's pourer mechanisms. The rubber seal should create a tight fit.
  3. Ensure the bottle is securely seated and stable. Repeat for up to four bottles.
Fully assembled HURRISE 4-Bottle Rotating Liquor Dispenser with bottles in place.
Image 4.3: Fully assembled 4-bottle dispenser. This image shows the complete dispenser unit mounted and ready for use, with four bottles inverted into their respective pourer mechanisms.

5. 操作手順

The HURRISE dispenser is designed for easy and accurate pouring of 1.5-ounce shots.

5.1 Dispensing Liquor

  1. Place a glass directly beneath the desired pourer.
  2. Firmly push the glass upwards against the pourer mechanism. This action will release a precisely measured 1.5-ounce shot of liquor into the glass.
  3. Once the pour is complete, remove the glass. The mechanism will automatically reset for the next pour.
Close-up of the pourer mechanism on the HURRISE dispenser.
Image 5.1: Close-up of the pourer mechanism. This image details the lower part of the dispenser, showing the valve and lever system that dispenses a measured amount of liquid when a glass is pressed against it.

5.2 Rotating Feature

The dispenser features a rotating design, allowing you to easily switch between the four attached bottles. Simply grasp the central frame and rotate it to bring the desired bottle to the front for dispensing.

6. メンテナンスと清掃

Regular cleaning ensures hygiene and proper functioning of your dispenser.

6.1クリーニング手順

  • 空のボトル: Before cleaning, remove all liquor bottles from the dispenser.
  • 手洗のみ： The dispenser is 食器洗い機には対応していません. Clean all parts by hand.
  • Disassemble Pourers: Carefully detach the individual pourer mechanisms from the main unit if possible, following any specific instructions for your model.
  • 洗浄成分: Wash the pourer mechanisms and any removable parts with warm, soapy water. Use a small brush to clean inside the pourer spouts and around seals.
  • 本体拭き取り： Wipe down the main aluminum frame with a damp cloth. Avoid abrasive cleaners that could damage the mirror finish.
  • すすぎと乾燥: Rinse all washed components thoroughly with clean water. Allow all parts to air dry completely before reassembling and reattaching bottles.

7。 トラブルシューティング

ディスペンサーで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

問題考えられる原因解決
Liquor is not dispensing or flow is slow.Bottle not seated correctly; pourer mechanism clogged; air lock.Ensure bottle is firmly inserted. Clean the pourer mechanism. Briefly remove and reinsert the bottle to release any air lock.
Dispenser is leaking.Bottle seal not tight; damaged pourer seal; dispenser not level.Check that bottles are securely inserted and seals are intact. Inspect pourer seals for damage and replace if necessary. Ensure the dispenser is mounted level.
Dispenser feels unstable after mounting.Improper installation; loose mounting screws.Verify that the dispenser is mounted into a stud or using appropriate anchors. Tighten all mounting screws.

8. 仕様

  • モデル： HURRISE1twhz4brp72056
  • ブランド： ハリーズ
  • 材料： アルミニウム
  • Capacity per Pour: 1.5オンス
  • Number of Bottles: 4
  • 製品寸法: 13.39 x 12.2 x 4.33インチ
  • 商品の重量: 約0.2ポンド（3.2オンス）
  • 食器洗い機対応: いいえ
  • スタイル： モダンな

9. 保証とサポート

HURRISE offers a hassle-free guarantee for this product. If you have any questions, concerns, or require assistance with your 4-Bottle Rotating Liquor Dispenser, please contact our customer support team. We are committed to ensuring your satisfaction.

For support, please refer to the contact information provided at the point of purchase or visit the official HURRISE store page on Amazon.

Amazonストアリンク: HURRISE Store

© 2024 HURRISE. All rights reserved.