FRANKE 115.0600.095 Centro Kitchen Faucet Instruction Manual

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your FRANKE 115.0600.095 Centro Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

安全情報

重要： Always turn off the main water supply before beginning any installation or maintenance work on the faucet. It is recommended that installation be performed by a qualified plumber to ensure compliance with local plumbing codes and safety standards. Use appropriate tools and wear protective gear during installation.

• 漏れを防ぐために、すべての接続が確実に固定されていることを確認してください。
• コンポーネントが損傷する恐れがあるため、接続を締めすぎないでください。
• Protect the faucet's chrome finish from abrasive materials or harsh chemicals.

パッケージ内容

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• FRANKE 115.0600.095 Centro Kitchen Faucet
• 取り付け金具
• 接続ホース

セットアップとインストール

The FRANKE 115.0600.095 Centro Kitchen Faucet is designed for deck mounting with a single hole installation. Follow these general steps for installation:

1. 取り付け面を準備します。 Ensure the sink or countertop has a mounting hole with a diameter of Ø35 mm. The maximum deck thickness should be considered for proper installation.
2. 蛇口を取り付けます。 Insert the faucet body into the mounting hole. Secure it from underneath the sink using the provided mounting hardware (washer and nut). Ensure the faucet is oriented correctly before fully tightening.
3. 水道管を接続する: Attach the hot and cold water supply lines to the corresponding inlets on the faucet. Connect the other ends to your hot and cold water supply valves. Hand-tighten first, then use a wrench for a quarter turn to ensure a leak-free seal.
4. 漏れがないか確認する: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections slightly until the leak stops.

A detailed technical diagram providing all necessary measurements and installation specifications for the faucet. Note the Ø35 mm mounting hole and 150° spout rotation.

操作手順

The FRANKE 115.0600.095 Centro Kitchen Faucet features a single mixer lever positioned at the top for easy control of water flow and temperature. The spout has a fixed position but offers a 150° rotation for convenience.

• 水の流れと温度制御: Move the lever upwards to increase water flow and downwards to decrease it. Move the lever left for hot water and right for cold water.
• 節水技術： This faucet incorporates a two-stage flow reduction system. When opening the lever, it will initially stop at a halfway point, naturally limiting water flow to reduce consumption by up to 50%. For a full flow, simply push the lever further upwards past this resistance point.
• Laminar Jet: The special design of the aerator provides a compact and crystal-clear water stream, significantly reducing splashing during use.
• 注ぎ口の回転: The faucet spout can be rotated up to 150 degrees, allowing for flexible use across different sink bowls or areas.

The faucet is shown installed in a kitchen environment, highlighting its design and functionality in a typical setting.

この画像は詳細な view of the faucet's aerator, which produces a compact and splash-reducing laminar water stream.

メンテナンスとケア

To maintain the appearance and functionality of your FRANKE 115.0600.095 Centro Kitchen Faucet, follow these care guidelines:

• 仕上げのクリーニング： Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
• 刺激の強い化学物質を避ける: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the chrome finish and internal components.
• エアレーターの清掃: If water flow becomes restricted, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reassemble the aerator securely.

トラブルシューティング

蛇口に問題が発生した場合は、次の一般的な問題と解決策を参照してください。

仕様

• モデル番号: 115.0600.095
• タイプ： High-pressure mixer faucet
• 仕上げる： クロム
• カートリッジ： Ceramic cartridge Ø 35 mm
• Mixer Lever Position: トップ
• 注ぎ口の回転: 150°
• 取付穴径: Ø35mm
• 注ぎ口のタイプ: 固定注ぎ口
• 材質（ハンドル/レバー）： セラミック
• 製品寸法: 23.7 x 25.3 x 5 cm（おおよそ）
• 商品の重量: 2.33キロ
• 特別な機能: Water Saving Technology, Laminar Jet

保証とサポート

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Franke website. Contact Franke customer service for assistance with parts, service, or any questions not covered in this manual.