NUWATT 6インチ ジンバル LED 埋め込みライト 取扱説明書

導入

Thank you for choosing the NUWATT 6 Inch Gimbal LED Recessed Light. This product is designed for versatile lighting applications, offering adjustable light direction and selectable color temperatures. This manual provides essential information for safe installation, operation, and maintenance of your new recessed lights. Please read it thoroughly before beginning installation.

Figure 1: NUWATT 6 Inch Gimbal LED Recessed Light (12-pack shown)

安全情報

警告： To avoid electric shock, always turn off power at the circuit breaker before installing or servicing the fixture. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.

• Do not install in wet locations. Suitable for damp 場所。
• 電源のボリュームを確認してくださいtage は器具の要件 (120V) に適合します。
• 器具を改造しないでください。改造すると保証が無効になり、安全上の危険が生じる可能性があります。
• This fixture is IC Rated, meaning it is suitable for direct contact with insulation.

箱の中身

各パッケージには次のコンポーネントが含まれています。

• 6" Gimbal LED Downlight
• 金属製ジャンクションボックス
• Hole Size Cut Out Template
• Wiring Instructions (detailed in this manual)

Figure 2: Included Components and Installation Steps Overview

セットアップとインストール

The NUWATT Gimbal LED Recessed Light features a slim, canless design for easy installation without the need for a separate housing. Follow these steps for proper installation:

1. 電源を切る: 作業を始める前に、設置場所の電源が回路ブレーカーでオフになっていることを確認してください。
2. カット穴: Use the provided hole size cut-out template to mark and cut a 6.25-inch diameter hole in the ceiling. Ensure there are no obstructions behind the ceiling at the chosen location.
   

   Figure 3: Cutting the Ceiling Hole

3. Wire Junction Box: Open the metal junction box. Connect the building's electrical wires (Live, Neutral, Ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure. Close the junction box cover.
   

   Figure 4: Junction Box Wiring

4. ライトをジャンクション ボックスに接続します。 Connect the male connector from the LED downlight to the female connector extending from the junction box. Ensure a firm connection.
5. ジャンクションボックスを挿入: Place the wired junction box through the cut hole into the ceiling cavity.
6. ダウンライトの取り付け: Push the spring clips on the sides of the LED downlight upwards. Carefully insert the downlight into the cut hole. The spring clips will automatically snap down and secure the fixture against the ceiling.
   

   Figure 5: Securing the Downlight
7. レンズ角度を調整する: Once installed, the gimbal lens can be tilted up to 30 degrees in any direction to adjust the light beam angle. This is ideal for sloped ceilings or for directing light to specific areas.
   

   Figure 6: Adjustable Gimbal Lens

8. 電力を回復する： 回路ブレーカーで電源を再度オンにします。

操作手順

Your NUWATT Gimbal LED Recessed Light offers adjustable color temperature and dimming capabilities.

色温度選択（5CCT）

Before final installation, or by carefully pulling down the fixture (without disconnecting wires), you can select one of five color temperatures using the switch located on the junction box:

• 2700K: Soft White (Warm, inviting light)
• 3000K: Warm White (Slightly less yellow than 2700K)
• 3500K: Neutral White (Balanced, natural light)
• 4000K: Cool White (Brighter, more energetic light)
• 5000K: Daylight (Very bright, bluish-white light)

Figure 7: 5 Color Temperature Options

調光機能

These lights are Triac dimmable, allowing for smooth brightness adjustment from 100% down to 10% when used with compatible Triac dimmer switches. Ensure your dimmer switch is rated for LED lighting.

Figure 8: Dimmable Lighting

メンテナンス

The NUWATT Gimbal LED Recessed Light requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

• クリーニング： 清掃する前に必ず電源を切ってください。器具は柔らかく乾いた布、または軽く湿らせた布で拭いてください。amp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or lens.
• 電球の交換: LEDチップは一体型で、ユーザーによる交換はできません。この器具は長寿命設計となっています。
• 検査： 定期的に器具を点検し、損傷や接続の緩みがないか確認してください。問題が見つかった場合は、電源を切り、資格のある電気技師にご相談ください。

トラブルシューティング

If you experience issues with your NUWATT Gimbal LED Recessed Light, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact NUWATT customer support.

仕様

Key technical specifications for the NUWATT 6 Inch Gimbal LED Recessed Light:

図9：製品仕様view

保証とサポート

NUWATT stands behind the quality of its products. This product comes with a 限定保証. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official NUWATT webサイト。

NUWATT is a US Family Business with over 50 years of lighting experience, committed to providing industry-leading features, quality, and durability. For technical assistance, troubleshooting, or warranty claims, please contact NUWATT customer support. Contact information can typically be found on the product packaging or the official NUWATT webサイト。

オンラインリソース: For additional information, FAQs, and product updates, visit the NUWATT Store on Amazon.

Figure 10: NUWATT Brand Logo