APOLLO Counterbalanced Electric Stacker Forklift

1. はじめに

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your APOLLO Counterbalanced Electric Stacker Forklift, Model CPD15W-177. Please read this manual thoroughly before operating the equipment to ensure proper usage and to prevent injury or damage.

Figure 1: APOLLO Counterbalanced Electric Stacker Forklift.

2. 安全に関する注意事項

Always prioritize safety when operating the electric stacker. Failure to follow these instructions can result in serious injury or death.

• オペレータートレーニング: この機器は、訓練を受けた許可された担当者のみが操作してください。
• 動作前チェック: Before each use, inspect the stacker for any damage, loose parts, or malfunctions. Ensure all controls are functioning correctly.
• 耐荷重: Never exceed the rated load capacity of 3300 lbs. Refer to the load capacity charts for safe lifting limits at various heights and load centers.
• 安定した負荷: 持ち上げたり移動したりする前に、荷物が安定していてフォークの中央に正しく配置されていることを確認してください。
• クリアランス： Maintain adequate clearance from walls, obstacles, and personnel during operation.
• 緊急停止： 緊急停止ボタンとその場所をよく理解しておいてください。
• バッテリーの安全性: Follow all battery charging and maintenance procedures outlined in this manual. Wear appropriate personal protective equipment (PPE) when handling batteries.
• 作業エリア: Operate the stacker on level, firm surfaces. Avoid uneven terrain or slopes.

Figure 2: Warning labels on the mast, indicating safety precautions for operation.

3. セットアップと組み立て

The APOLLO Counterbalanced Electric Stacker is typically delivered largely pre-assembled. However, some initial setup and checks are required before first use.

3.1初期検査

Upon receipt, carefully inspect the packaging and the stacker for any signs of shipping damage. Report any damage immediately to the carrier and supplier.

3.2 Battery Connection and Initial Charge

Ensure the battery is properly connected and fully charged before the first operation. Refer to the charging section for detailed instructions.

Figure 3: The battery compartment, showing the lead-acid batteries. Ensure connections are secure.

3.3 Fork Adjustment

The forks are adjustable to accommodate various pallet sizes. Adjust the fork width by loosening the locking pins, sliding the forks to the desired position, and re-securing the pins.

Figure 4: Fork dimensions and adjustability. Forks are 42 inches long, 1.4 inches thick, and adjustable from 8.7 to 26.8 inches in width.

4. 操作手順

4.1コントロールオーバーview

The stacker features a long handle structure for flexible steering and a control panel for key functions.

• キースイッチ: Turns the stacker on/off.
• 緊急停止ボタン: Immediately cuts power to all functions.
• Lift/Lower Controls: Levers or buttons on the handle to raise and lower the forks.
• 方向制御: Twist grip or buttons on the handle for forward and reverse movement.
• バッテリーインジケーター: 現在のバッテリー充電レベルを表示します。

Figure 5: The control panel, featuring the key switch, emergency stop button, and battery charge indicator.

4.2 Starting the Stacker

1. キーをキースイッチに挿入し、「ON」の位置に回します。
2. バッテリーインジケーターをチェックして、十分に充電されていることを確認してください。
3. 緊急停止ボタンが解除されている（引き出されている）ことを確認します。

4.3 荷物の上げ下げ

1. Position the stacker squarely in front of the load.
2. Carefully insert the forks completely under the pallet or load.
3. Use the lift control to raise the load slightly off the ground.
4. Before moving, ensure the load is stable and within the stacker's capacity.
5. To lower, use the lower control. Lower loads slowly and smoothly.

4.4 Moving the Stacker

1. With the load slightly raised, use the directional controls on the handle to move forward or backward.
2. Steer using the long handle. The vertical driving wheel provides efficient and flexible movement.
3. Always travel with the load in the lowest possible position for stability, especially when turning.

4.5 Load Capacity Charts

Adhere strictly to the load capacity guidelines to prevent tipping or damage.

Figure 6: Load Capacity Chart. For example, load capacity is 1980 lbs when lifting height is between 157-177 inches, and 3300 lbs when lifting height is within 118 inches.

Figure 7: Load center chart, illustrating how load capacity decreases as the load center distance increases.

Figure 8: Lifting height versus load capacity chart, showing maximum weight at different lift heights.

5. メンテナンス

Regular maintenance is crucial for the longevity and safe operation of your electric stacker.

5.1 毎日のチェック

• バッテリーの充電レベルを確認してください。
• Inspect forks for damage or wear.
• ブレーキ機能を確認します。
• 油圧液の漏れがないか確認してください。
• Ensure all warning labels are legible.

5.2 バッテリーの充電

Charge the lead-acid battery using the designated charger. Connect the charger to the charging port on the stacker. Ensure proper ventilation during charging.

Figure 9: The charger port, clearly marked for battery charging.

5.3 油圧システム

Periodically check the hydraulic fluid level and replenish if necessary. Use only recommended hydraulic fluid. Inspect hydraulic hoses and fittings for wear or damage.

5.4 Wheel and Caster Inspection

Inspect wheels and casters for wear, damage, or debris. Replace worn wheels to maintain smooth operation and stability.

6。 トラブルシューティング

This section addresses common issues you might encounter with your electric stacker.

7. 仕様

Detailed technical specifications for the APOLLO Counterbalanced Electric Stacker Forklift, Model CPD15W-177.

Figure 10: Key dimensions of the stacker, including mast height lowered (82.1 inches), mast height raised (216.5 inches), overall length (109.4 inches), and maximum lift height (177 inches).

注意：製品改良のため、仕様は予告なく変更することがあります。

8. 保証とサポート

APOLLO products are engineered for durability and performance. For warranty information, service requests, or technical support, please refer to the contact details provided at the time of purchase or visit the official APOLLO webサイト。

カスタマーサポート: For assistance, please contact APOLLOLIFT customer support. Details can be found on your purchase documentation or the APOLLO brand store.

戻り値: This product is eligible for 30-day easy returns. Please refer to the seller's return policy for specific conditions.