モンテック X3 メッシュ

Montech X3 メッシュ PC ゲーミングケース ユーザーマニュアル

Model: X3 MESH Black

1.製品オーバーview

The Montech X3 Mesh is an ATX Mid-Tower PC Gaming Case designed for high airflow and visual appeal. It comes equipped with six pre-installed fixed RGB lighting fans (3x 140mm in the front, 2x 120mm on top, and 1x 120mm in the rear) to optimize cooling and provide vibrant illumination. The case features a unique door-open tempered glass side panel for easy access and a full panoramic view 内部コンポーネントの。

Montech X3 Mesh PC Gaming Case with RGB fans

Figure 1: Montech X3 Mesh PC Gaming Case (Black)

2.セットアップガイド

2.1 開梱と初期検査

Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws and cable ties, are present.

2.2 コンポーネントのインストール

The Montech X3 Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards. It offers ample space for CPU coolers up to 160mm high and GPUs up to 305mm long.

Montech X3 Mesh internal dimensions for CPU, VGA, and PSU

図2: 内部コンポーネントのクリアランス

2.2.1マザーボードの取り付け

  1. Open the tempered glass side panel by gently pulling the fabric tab.
  2. I/O シールドをケース背面のマザーボードの切り欠きに取り付けます。
  3. Align your motherboard with the standoffs inside the case and secure it with screws.

2.2.2電源ユニット（PSU）の設置

The PSU is mounted at the rear bottom of the case. The case supports PSUs up to 160mm in length.

  1. ケースの背面から PSU を指定されたコンパートメントにスライドさせます。
  2. PSUを外側からネジで固定します。

2.2.3 ストレージドライブのインストール

The case provides bays for 2x 2.5" SSDs behind the motherboard tray and 2x 3.5" HDDs (or 2x 2.5" SSDs) in a removable cage below the PSU shroud.

Montech X3 Mesh internal drive bays for SSDs and HDDs

Figure 3: Drive Bay Locations

  1. For 2.5" SSDs, mount them directly onto the SSD brackets behind the motherboard tray.
  2. For 3.5" HDDs, slide them into the drive cage located under the PSU shroud and secure. The drive cage is removable for easier installation or to create more space.

2.2.4 グラフィックカード（GPU）のインストール

Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the provided screws.

2.3 ケーブル管理

The Montech X3 Mesh offers dedicated cutouts and tie-down points behind the motherboard tray for efficient cable routing, ensuring a clean build and improved airflow.

Montech X3 Mesh cable management cutouts and tie-down points

Figure 4: Smart Cable Management Features

3. 操作手順

3.1電源オン

Connect your power cable to the PSU and press the power button located on the top I/O panel.

Montech X3 Mesh top I/O panel with power button, USB ports, and audio jacks

図5: 上部I/Oパネル

3.2 RGB照明制御

The X3 Mesh features fixed RGB lighting fans. To turn the fan lighting on or off, simply press the dedicated LED button on the top I/O panel. Note that the lighting is fixed and not addressable.

Video 1: Demonstration of RGB Lighting Fans

This video showcases the fixed RGB lighting of the fans within the Montech X3 Mesh case, highlighting their visual effect when powered on.

3.3 空気の流れと冷却

The case is designed for high airflow, with triple 140mm fans in the front providing massive air intake and pre-mounted fans at the top and rear for optimal exhaust. This configuration helps maintain low temperatures for your components.

Montech X3 Mesh airflow diagram showing intake and exhaust fans

Figure 6: Optimized Airflow Design

4. メンテナンス

4.1 ダストフィルターの清掃

The Montech X3 Mesh includes a magnetic dust filter on the top panel and a washable dust filter for the PSU intake at the bottom. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.

  1. Gently remove the magnetic dust filter from the top panel.
  2. Slide out the PSU dust filter from the bottom of the case.
  3. Clean the filters using compressed air or by washing them with water (ensure they are completely dry before re-installation).

4.2一般的なクリーニング

Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panel. For stubborn smudges on the glass, a glass cleaner can be used sparingly on the cloth, not directly on the panel.

5。 トラブルシューティング

5.1 ファンが回転しない / RGBが点灯しない

  • Ensure all fan Molex connectors are securely connected to your power supply. The pre-installed fans are daisy-chained, so check the connection to the last fan in the chain.
  • Verify that the LED button on the top I/O panel is pressed to activate the RGB lighting.
  • Check the power supply connections to the fan hub (if applicable) and the motherboard.

5.2 空気の流れが悪い / 高温

  • Clean all dust filters as described in Section 4.1.
  • Ensure proper cable management to avoid obstructing airflow paths inside the case.
  • Verify that all fans are spinning correctly.

6. 技術仕様

特徴仕様
モデル名X3 MESH Black
ケースタイプミッドタワー
マザーボードの互換性ATX、Micro-ATX、Mini-ITX
寸法（長さx幅x高さ）14.57 x 8.27 x 18.9インチ
アイテム重量14.3ポンド
材料Tempered Glass (Side Panel)
プレインストールされたファンFront: 3x 140mm Fixed RGB
Top: 2x 120mm Fixed RGB
Rear: 1x 120mm Fixed RGB
ファンサポートFront: 3x 120mm/140mm
Top: 2x 120mm/140mm
リア：1x 120mm
ラジエーターサポート上：最大280mm
Front: Up to 360mm (with HDD cage removed)
CPU クーラーのクリアランス160mm
GPU クリアランス305mm
ドライブベイ2x 2.5" SSD
2x 3.5" HDD (convertible to 2.5" SSD)
I/O ポート2x USB 2.0, 1x USB 3.0, HD Audio (Mic/Headphone), Power Button, Reset Button, LED Control Button
電源取付タイプリアマウント

7. 保証とサポート

For warranty information, technical support, or to inquire about replacement parts, please refer to the official Montech web公式サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求の際は、購入証明としてレシートを保管してください。

Montech offers various protection plans for extended coverage. Please visit the product page on Amazon or Montech's official website for details on available plans.