ベースス LED デスク Lamp DGZG-0G Instruction Manual

1. セットアップ

Before first use, ensure the Baseus LED Desk Lamp is fully charged. The lamp features a built-in 2200mAh battery, which takes approximately 3 hours to fully charge. You can use the provided USB-C cable to connect the lamp 互換性のある電源に接続します。

Figure 1: The Baseus LED Desk Lamp 標準の直立位置で。

Lamp is designed for portability and can be used while charging. The base is made of aluminum, providing stability. The lamp's arm can be adjusted from 0° to 180° to direct light as needed.

2. 操作手順

電源のオン/オフと明るさの調整

Lamp features a touch-sensitive control panel on its base. Tap the power button to turn the lamp on or off. To adjust brightness, press and hold the power button. The brightness will cycle through its range, release the button at your desired level.

色温度の選択

Baseus LEDデスクLamp offers 3 color temperature settings: warm light (3000K), mixed light (4500K), and cool light (6000K). Tap the color temperature button (usually indicated by a sun icon or similar) to cycle through these options. Choose warm light for reading or bedroom, mixed light for living room or home, and cool light for office work.

Auto-Dimming Smart Feature

Lamp is equipped with an auto-dimming smart feature that intelligently senses the brightness of the room environment. This dynamically optimizes the room lighting balance for a smooth and eye-caring light experience. This feature helps prevent visual strain in dark environments by increasing brightness and reduces glare in bright environments by decreasing の明るさ。

Adjustable Angle and Illumination

Lamp's head can be adjusted from 0° to 180°, allowing you to direct the light precisely where it's needed. It provides a 47-inch wide rectangular illumination, covering a large desk area effectively. The center illuminance can reach up to 940 Lux.

3. メンテナンス

To ensure the longevity and optimal performance of your Baseus LED Desk Lamp, follow these general maintenance guidelines:

• クリーニング： 乾いた柔らかい布で拭いてください。ampの表面を傷つける可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
• ストレージ： 長期間使用しない場合は、amp in a cool, dry place. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan.
• バッテリーのケア： lを充電するamp fully when the battery is low. Avoid completely draining the battery frequently, as this can reduce its overall lifespan. The built-in 2200mAh battery is designed for long-lasting use.

No specific user-replaceable parts are designed for routine maintenance. For any internal repairs or battery replacement, it is recommended to contact customer support.

4。 トラブルシューティング

Baseus LED Desk Lで問題が発生した場合amp、次の一般的なトラブルシューティング手順を参照してください。

• Lamp オンになっていない： lを確保するamp is charged. Connect it to a power source using the USB-C cable and allow it to charge for at least 15-30 minutes before attempting to turn it on again.
• Brightness issues: If the brightness is too low or too high, try manually adjusting it by pressing and holding the power button. If the auto-dimming feature is active, ensure the ambient light sensor is not obstructed.
• 充電に関する問題: Verify that the USB-C cable is securely connected to both the lamp and the power adapter. Try using a different USB-C cable or power adapter to rule out faulty accessories.
• タッチコントロールが反応しない: Ensure your fingers are clean and dry when operating the touch controls. If the issue persists, try restarting the lamp 電源のオン/オフを切り替えることによって。

If these steps do not resolve the problem, please contact Baseus customer support for further assistance.

5. 仕様

6. 保証

Specific warranty information for the Baseus LED Desk Lamp (Model DGZG-0G) is not provided in the product details. Please refer to the product packaging or contact Baseus customer support for detailed warranty terms and conditions.

7. サポート

For any questions, technical assistance, or support regarding your Baseus LED Desk Lamp, please contact Baseus customer service. You can also visit the official Baseus store for more information and product updates.

Baseus公式ストア: AmazonのBaseusストアをご覧ください

Baseus is committed to humanized design and product quality, striving to achieve the