Renkforce RF-4599772 USB-C Docking Station User Manual

1. はじめに

The Renkforce RF-4599772 USB-C Docking Station is a versatile hub designed to expand the connectivity of your USB-C enabled device. It integrates multiple essential ports, including HDMI for video output, USB 3.0 for high-speed data transfer, and a card reader for SD and microSD cards. Additionally, it features an M.2 SSD enclosure for expanding storage and supports USB-C Power Delivery to charge your host device.

主な特徴:

• Integrated M.2 2280 B&M SSD enclosure, supporting up to 2TB storage.
• HDMI output with up to 4K @ 30Hz resolution.
• USB-C Power Delivery (PD) up to 100W.
• Two USB 3.0 ports for high-speed data transfer (up to 5 Gbps).
• Fast data transfer for SD and microSD cards.

2. パッケージ内容

開梱後、パッケージの内容をご確認ください。不足品や破損品がございましたら、販売店までご連絡ください。

• Renkforce RF-4599772 USB-C Docking Station
• SSD取り付け用のドライバーとネジ
• ユーザーマニュアル（このドキュメント）

Image: The Renkforce RF-4599772 docking station shown with the included screwdriver and small screws, indicating tools for internal component installation.

3.製品オーバーview

ドッキング ステーションのポートと機能について理解しておきましょう。

画像: トップダウン view of the Renkforce RF-4599772 docking station, clearly displaying the USB-C PD input, SD/MicroSD card slots, HDMI port, and two USB 3.0 ports.

1. USB-C PDポート： Connect your USB-C power adapter for Power Delivery to the host device.
2. SDカードスロット: Insert standard SD cards for data transfer.
3. MicroSDカードスロット： Insert microSD cards for data transfer.
4. HDMIポート： Connect to an external display for video output.
5. USB 3.0 ポート (x2): Connect USB peripherals such as keyboards, mice, or external drives.
6. USB-C ホスト ケーブル: Connects the docking station to your computer's USB-C port.

4. セットアップ

4.1. SSDのインストール（オプション）

The docking station includes an M.2 SSD enclosure. Follow these steps to install an M.2 2280 B&M SSD:

画像: 内部 view of the docking station's circuit board, highlighting the slot for an M.2 SSD and other integrated components.

1. Carefully open the docking station casing using the provided screwdriver.
2. 回路基板上の M.2 スロットを見つけます。
3. Insert your M.2 2280 B&M SSD into the slot at an angle, then gently push it down.
4. 付属のネジでSSDを固定します。
5. Close the docking station casin安全に。

4.2. ホストデバイスへの接続

1. Connect the integrated USB-C host cable from the docking station to a USB-C port on your computer or laptop.
2. The docking station is plug-and-play and should be recognized automatically by your operating system.

4.3. 周辺機器の接続

• 電力供給： If your host device supports USB-C PD, connect your original USB-C power adapter to the USB-C PD port on the docking station. This will charge your host device through the docking station.
• HDMIディスプレイ: Connect an HDMI cable from the docking station's HDMI port to your external monitor or TV. Ensure your display is set to the correct input source.
• USB デバイス: Plug your USB peripherals (e.g., mouse, keyboard, USB flash drive) into the USB 3.0 ports.
• メモリーカード： Insert SD or microSD cards into their respective slots.

5. 操作手順

5.1. HDMI出力を使用する

Once connected, your operating system should automatically detect the external display. You can configure display settings (e.g., duplicate, extend, resolution) through your computer's display settings.

• Supports resolutions up to 4K (3840 x 2160) at 30Hz.
• For optimal performance, ensure your HDMI cable and display support the desired resolution.

5.2. Data Transfer via USB 3.0 Ports

The two USB 3.0 ports support data transfer speeds up to 5 Gbps. Connect your USB devices and access them as you would directly from your computer.

5.3. Using the Card Reader

Insert your SD or microSD card into the corresponding slot. The card will appear as a removable drive on your computer, allowing you to transfer files.

• Ensure the card is inserted correctly and fully seated.
• Always safely eject the card from your operating system before removing it physically.

5.4. Using the M.2 SSD Enclosure

After installing an M.2 SSD (as per Section 4.1), the SSD will function as an external storage device. It may require initialization and formatting through your operating system's disk management tools before first use.

6. メンテナンス

• ドッキング ステーションは、柔らかく乾いた布で拭いて清潔に保ってください。
• 液体クリーナーや溶剤の使用は避けてください。
• デバイスは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• デバイスを湿気や液体にさらさないでください。

7。 トラブルシューティング

• ディスプレイ出力なし:
  • Ensure the USB-C host cable is securely connected to both the docking station and your computer.
  • Verify the HDMI cable is properly connected to the docking station and the display.
  • コンピューターのディスプレイ設定をチェックして、外部モニターが正しく検出され、構成されていることを確認します。
  • 可能であれば、別の HDMI ケーブルまたはディスプレイを試してください。
• USBデバイスが認識されません:
  • Ensure the USB-C host cable is firmly connected.
  • Try connecting the USB device to a different USB port on the docking station or directly to your computer.
  • Some high-power USB devices may require external power or a direct connection to the computer.
• SD/MicroSD カードが検出されません:
  • カードが正しいスロットに完全に挿入されていることを確認してください。
  • Try a different card or connect the card directly to your computer if possible.
  • Check your computer's disk management for the card.
• Power Delivery not working:
  • Ensure your USB-C power adapter is connected to the docking station's USB-C PD port.
  • ホスト デバイスが USB-C Power Delivery をサポートしていることを確認します。
  • Use the original power adapter provided with your host device or a compatible high-wattage USB-C PD 充電器。

8. 仕様

9. 安全情報

• デバイスを分解したり改造したりしないでください。
• 極端な温度、湿度、直射日光を避けてください。
• お子様の手の届かない場所に保管してください。
• Use only compatible power adapters for Power Delivery.
• 雷雨のときや長期間使用しない場合は、デバイスを切断してください。

10. 保証とサポート

Renkforce products are designed for reliability and performance. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Renkforce website. Please have your model number (RF-4599772) and proof of purchase ready when contacting support.

For the latest drivers and software updates, please visit the manufacturer's webサイト。