1. 重要な安全情報
Before operating the ZIPRO Glow Recumbent Exercise Bike, please read and understand all instructions in this manual. Keep this manual for future reference.
- 運動プログラムを開始する前に医師に相談してください。
- 使用前にすべての部品がしっかりと組み立てられていることを確認してください。
- エクササイズバイクを平らで安定した場所に置きます。
- 動作中は子供やペットを装置に近づけないでください。
- 最大使用者体重: 150 kg (330 ポンド)。
- 適切な運動用の服装と靴を着用してください。
- 気分が悪くなったり、めまいがしたり、痛みを感じたりした場合は、直ちに運動を中止してください。
2.製品オーバーview
The ZIPRO Glow Recumbent Exercise Bike is designed for home fitness, offering a comfortable and effective workout experience with its magnetic resistance system and advanced computer.
全体 view of the ZIPRO Glow Recumbent Exercise Bike.
Dimensions of the exercise bike: 135 cm (length) x 63 cm (width) x 109 cm (height).
3. セットアップと組み立て
The ZIPRO Glow Exercise Bike requires some assembly. Follow these general steps. Refer to the included assembly diagram for detailed instructions.
- コンポーネントを解凍します: Carefully remove all parts from the packaging and lay them out. Verify all components are present according to the parts list.
- スタビライザーを取り付ける: Secure the front and rear stabilizers to the main frame using the provided bolts and tools. Ensure the leveling feet on the rear stabilizer are adjusted for stability.
- ペダルを取り付ける: Attach the left and right pedals to their respective crank arms. Note that pedals are typically marked 'L' and 'R' and thread in opposite directions.
- シートと背もたれを組み立てる: Mount the ergonomic seat and backrest onto the seat post. Adjust the seat position for comfort.
- Mount Handlebar and Console: Attach the handlebar assembly and the advanced computer console to the main upright post. Connect any necessary cables for the console.
- 接続電源： Plug the electric cable into a suitable power outlet.
- 最終チェック: 初めて使用する前に、すべてのボルトと接続部がしっかりと固定されているか再確認してください。
The exercise bike features integrated transport wheels for easy relocation.
4. 操作手順
Familiarize yourself with the functions of your ZIPRO Glow Exercise Bike for an optimal workout.
4.1 コンソール操作
The advanced computer console displays various workout data and allows for program selection.
The console displays workout metrics such as Time, Calories, Speed, Pulse, Body Fat, and Recovery.
The console includes a stand for mobile devices and a USB port for charging.
- 電源オン/オフ: The console typically powers on when you start pedaling or press a button. It will power off automatically after a period of inactivity.
- データ表示： The screen cycles through various metrics. Use the 'MODE' button to select specific data to view.
- 抵抗調整： Use the 'UP' and 'DOWN' buttons to adjust the magnetic resistance level (32 levels available).
- 脈拍測定: Grip the pulse sensors on the handlebars to measure your heart rate.
- iConsole+ and Kinomap Compatibility: Connect your mobile device via Bluetooth to use the iConsole+ or Kinomap applications for extended training possibilities, virtual routes, and workout programs.
The exercise bike is compatible with iConsole+ and Kinomap applications for enhanced training.
4.2 Adjustments for Comfort
- シート調整: The ergonomic seat can be adjusted forward and backward to accommodate different user heights. Loosen the adjustment knob, slide the seat to the desired position, and tighten the knob securely.
- ハンドルバーの調整: The handlebar angle can be continuously adjusted for optimal comfort during your workout.
- ペダルストラップ: Adjust the straps on the anti-slip pedals to secure your feet during exercise.
The bike features an ergonomic seat and backrest for comfortable workouts.
Touch-sensitive pulse sensors are integrated into the handlebars for heart rate monitoring.
Anti-slip pedals with adjustable straps ensure stable foot support during exercise.
5. メンテナンス
定期的なメンテナンスにより、エクササイズバイクの寿命が長くなり、最適なパフォーマンスが確保されます。
- クリーニング： 広告で自転車を拭くamp 使用後は毎回布で汗やほこりを拭き取ってください。研磨剤入りの洗剤や溶剤の使用は避けてください。
- 接続を確認してください: Periodically inspect all bolts, nuts, and connections to ensure they are tight. Tighten any loose fasteners.
- 潤滑: The magnetic resistance system and reinforced bearings are designed for low maintenance. No regular lubrication is typically required for these components.
- ストレージ： 自転車は直射日光や極端な温度を避け、乾燥した涼しい場所に保管してください。
6。 トラブルシューティング
このセクションでは、エクササイズ バイクで発生する可能性のある一般的な問題について説明します。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Console not displaying data or not powering on. | Loose power connection; batteries (if applicable) are low or incorrectly installed; console cable disconnected. | Check power cable connection. Ensure batteries are correctly installed and replace if necessary. Verify console cables are securely connected. |
| 抵抗が変化しない、または一貫性がない。 | Resistance mechanism cable loose or damaged; internal component issue. | Check the resistance adjustment cable connection. If the issue persists, contact customer support. |
| 動作中に異常な音がする。 | Loose bolts or components; friction from moving parts. | Inspect all assembled parts and tighten any loose bolts. The drive system housing is designed to dampen noise, but if a persistent unusual noise occurs, contact support. |
| Inaccurate pulse readings. | Hands not firmly gripping sensors; dry hands; electrical interference. | Ensure a firm, consistent grip on both pulse sensors. Slightly moisten hands if they are too dry. Avoid using mobile devices directly on the console during measurement. |
7. 仕様
| 特徴 | 説明 |
|---|---|
| ブランド | ジプロ |
| モデル | 輝き |
| 色 | Grey-Green |
| 抵抗メカニズム | 磁気 |
| 抵抗レベル | 32レベル |
| 電源 | 電気ケーブル |
| 推奨用途 | Indoor, Home Gym |
| アイテム重量 | 36 kg (79.4 ポンド) |
| 最大ユーザー重量 | 150 kg (330 ポンド) |
| 寸法（長さ×幅×高さ） | 135cm x 63cm x 109cm (53.1 x 24.8 x 42.9 インチ) |
| 材料 | Plastic, Metal, Polyethylene |
| 特集 | Advanced Computer, iConsole+ & Kinomap Compatibility, Ergonomic Seat & Backrest, Pulse Sensors, Bottle Holder, Transport Wheels, Leveling Feet, Anti-slip Pedals with Straps, Mobile Device Stand, USB Charging Port |
8. 保証とサポート
For information regarding warranty coverage and customer support, please refer to the documentation provided with your purchase or visit the official ZIPRO website. For direct assistance, you may contact the seller, ZIPRO, through your purchase platform.
連絡先： Refer to your purchase receipt or the product packaging for specific customer service details.