1.製品オーバーview
The Logitech CAT5E KIT TAP Graphite is designed to simplify the connection of Logitech Tap devices to a meeting room computer. This kit utilizes standard Cat5e cabling to transmit both data and power over a single cable, eliminating the need for separate power outlets at the Tap location. It supports cable runs of up to 40 meters, offering significant flexibility in room layout and installation.
The kit includes all necessary cabling, a power supply, and adapters to facilitate a clean and efficient setup. It is compatible with various Logitech Tap mounting solutions, including Table Mount, Riser Mount, and Wall Mount, allowing for integrated cable routing and a tidy appearance.
2. パッケージ内容
以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。
- Cat5e Cables (10 meters included, supports up to 40 meters with user-supplied cabling)
- 電源ユニット
- USB Data and Power Adapters
Figure 2.1: Complete Logitech CAT5E KIT TAP Graphite components.
3. セットアップ手順
Follow these steps to set up your Logitech CAT5E KIT TAP Graphite:
- ケーブルを準備します: The kit includes 10 meters of Cat5e cabling. If a longer run is required (up to 40 meters), you may use your own Cat5e or higher cabling. For custom lengths, cables can be cut and crimped to exact specifications to minimize clutter.
- Connect the Adapters: Identify the USB data and power adapters. One adapter connects to the Logitech Tap device, and the other connects to the meeting room computer.
- Connect Cat5e Cable: Connect one end of the Cat5e cable to the adapter connected to the Logitech Tap. Connect the other end of the Cat5e cable to the adapter connected to the meeting room computer. Ensure secure connections at both ends.
- 電源の接続： Plug the power supply unit into a suitable power outlet and connect it to the designated power input on the appropriate adapter (typically the one near the computer or power injector). This supplies power over the Cat5e cable to the Logitech Tap.
- Integrate with Mounts (Optional): If using a Logitech Tap Table Mount, Riser Mount, or Wall Mount, route the Cat5e cable through the mount's integrated cable management system for a clean and secure installation.
Figure 3.1: USB-C adapter for Logitech Tap connection.
Figure 3.2: Power injector with IN/OUT ports for Cat5e cabling.
4. 操作手順
Once the Logitech CAT5E KIT TAP Graphite is properly installed and connected, it operates automatically. The kit facilitates the transmission of both USB data and power from the meeting room computer to the Logitech Tap device over a single Cat5e cable.
Ensure that the meeting room computer and the Logitech Tap are powered on. The kit will then provide the necessary connectivity for the Tap to function as intended within your meeting room setup. No additional user interaction is required for the kit itself beyond initial setup.
5. メンテナンス
To ensure the longevity and optimal performance of your Logitech CAT5E KIT TAP Graphite, consider the following maintenance guidelines:
- ケーブルのお手入れ: Avoid sharp bends, kinks, or excessive pulling on the Cat5e cables. This can damage the internal wires and affect performance.
- コネクタ保護: Keep the RJ45 connectors clean and free from dust or debris. Avoid forcing connectors into ports.
- 環境条件: Store and operate the kit in a dry environment, away from extreme temperatures and direct sunlight.
- クリーニング： If necessary, gently wipe the external surfaces of the adapters and power supply with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
6。 トラブルシューティング
If you encounter issues with your Logitech CAT5E KIT TAP Graphite, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No data or power to Logitech Tap | ケーブル接続が緩んでいる 電源が接続されていないか故障しています Damaged Cat5e cable Incorrectly crimped custom cable | Ensure all Cat5e and power connections are secure. Verify the power supply is plugged in and functioning. Inspect the Cat5e cable for visible damage. Try a different cable if available. If using a custom cable, re-check crimping for proper pinout. |
| 断続的な接続 | Damaged cable or connectors 環境干渉 | Check cables and connectors for any signs of wear or damage. Ensure cables are not run near sources of strong electromagnetic interference. |
| Logitech Tap not recognized by computer | Driver issues on computer Kit not providing proper data signal | Ensure the latest drivers for Logitech Tap are installed on the computer. Verify all kit components are correctly connected and powered. Restart the computer and Tap. |
If the issue persists after attempting these solutions, please contact Logitech customer support for further assistance.
7. 仕様
- ブランド： ロジテック
- モデル名: CAT5E KIT TAP GRAPHITE
- 商品モデル番号: 952-000019
- ケーブルタイプ: Ethernet (Cat5e or higher compatible)
- 対応デバイス: ロジクール タップ
- 最大ケーブル長： 最大40メートル（131フィート）
- 特集: Cable Management System compatibility
- 電力供給： Power over Cat5e (PoE-like functionality)
- データ転送: USB data over Cat5e
- 色： グレー
- 商品の重量: Approximately 998 Grams (2.2 pounds)
8. 保証とサポート
This Logitech product is covered by a limited hardware warranty. For detailed warranty information, terms, and conditions, please refer to the warranty documentation included with your product or visit the official Logitech support webサイト。
For technical support, troubleshooting guides, and frequently asked questions, please visit the Logitech support portal:
サポートにお問い合わせいただく際は、製品のモデル番号 (952-000019) とシリアル番号 (該当する場合) をご用意ください。