BASIC BSACH-F18CD

BASIC HALO Split Air Conditioner User Manual

Model: BSACH-F18CD | 18400 BTU with Wi-Fi

1. はじめに

Thank you for choosing the BASIC HALO Split Air Conditioner. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new air conditioning unit. Please read this manual thoroughly before using the appliance and retain it for future reference.

This unit is designed to provide comfortable cooling and heating (if applicable) for your indoor environment, featuring a 18400 BTU capacity and integrated Wi-Fi for smart control.

2. 安全情報

火災、感電、または怪我のリスクを軽減するために、常に次の基本的な注意事項を守ってください。

  • 使用前にすべての指示をお読みください。
  • この機器は適切に接地する必要があります。
  • 濡れた手で本機を操作しないでください。
  • 電源がユニットの仕様 (220V) と一致していることを確認します。
  • 空気の吹出口や吸気口に物を入れないでください。
  • 子供をユニットから遠ざけてください。
  • Professional installation is highly recommended to ensure proper setup and safety.
  • 清掃やメンテナンスを行う前に電源をオフにしてください。

3.製品オーバーview

The BASIC HALO Split Air Conditioner consists of an indoor unit, an outdoor unit, and a remote control. It offers various modes for optimal climate control.

HALO Indoor Unit with Remote Control

図3.1: Indoor Unit and Remote Control. The indoor unit distributes conditioned air, while the remote allows for convenient control of settings.

HALO Outdoor Unit

図3.2: Outdoor Unit. This unit houses the compressor and condenser, responsible for heat exchange with the outside environment.

HALO Indoor Unit Front View

図3.3: フロント view of the HALO Indoor Unit, showcasin洗練されたデザインとディスプレイエリアを備えています。

HALO Indoor Unit with Wi-Fi Logo

図3.4: Indoor Unit highlighting the Wi-Fi connectivity feature, allowing for smart control.

4. セットアップ

Proper installation is crucial for the performance and longevity of your air conditioner. It is strongly recommended that installation be performed by a qualified professional.

4.1 インストール手順(専門家推奨)

  1. 場所を選択してください: 室内ユニットと室外ユニットの両方に適切な場所を選択し、適切な空気の流れと排水を確保します。
  2. 屋内ユニットの取り付け: Securely mount the indoor unit to the wall, ensuring it is level.
  3. 屋外ユニットの取り付け: Place the outdoor unit on a stable, level surface, away from direct sunlight or obstructions.
  4. Connect Refrigerant Pipes: Connect the copper refrigerant pipes between the indoor and outdoor units. Ensure connections are tight and leak-free.
  5. 電気配線: Connect the electrical wiring according to the wiring diagram provided in the full installation manual. Ensure proper grounding.
  6. 排水管の設置: Install the drainage pipe from the indoor unit to ensure proper condensation removal.
  7. Vacuum and Test: Evacuate the refrigerant lines to remove air and moisture, then test the unit for proper operation.

4.2 初回電源投入

After professional installation, ensure all connections are secure. Turn on the main power supply to the unit. The unit will typically perform a self-check. You can then use the remote control or the Wi-Fi app to begin operation.

5. 操作手順

Your HALO Split Air Conditioner offers various modes and settings for optimal comfort. Use the remote control or the Wi-Fi app to adjust settings.

5.1リモコン機能

  • 電源ボタン: ユニットの電源をオンまたはオフにします。
  • モードボタン: Cycles through operating modes: Cool, Heat (if applicable), Fan, Dry, Auto.
  • 温度ボタン(▲/▼): 希望の温度に調整します。
  • ファン速度ボタン: ファン速度 (自動、低、中、高) を選択します。
  • スイングボタン: 空気の方向を決める垂直ルーバーの動きを制御します。
  • タイマーボタン: スケジュール運転のオン/オフタイマーを設定します。
  • スリープモード: 快適な睡眠のために温度とファン速度を調整します。
  • Wi-Fiボタン: Activates or deactivates the Wi-Fi function for smart control.

5.2 Wi-Fi接続

The unit features Wi-Fi connectivity for remote control via a smartphone application. Follow these general steps to connect:

  1. Download the official BASIC HALO smart app from your device's app store.
  2. Ensure your air conditioner is powered on and the Wi-Fi function is activated (refer to remote control).
  3. Follow the in-app instructions to add your device, which typically involves connecting to the unit's temporary Wi-Fi network and then configuring it to join your home Wi-Fi network.
  4. Once connected, you can control the unit from anywhere using the app.

6. メンテナンス

定期的なメンテナンスにより、最適なパフォーマンスが確保され、エアコンの寿命が延びます。

6.1 エアフィルターの清掃

ユニットを頻繁に使用する場合やほこりの多い環境では、2 週間ごとにエアフィルターを清掃してください。

  1. ユニットの電源をオフにします。
  2. 室内機の前面パネルを開きます。
  3. エアフィルターを取り外します。
  4. フィルターをぬるま湯と中性洗剤で洗い、よくすすいでください。
  5. フィルターを再度挿入する前に、日陰で完全に乾燥させてください。
  6. フロントパネルを閉じて電源を復旧します。

6.2 室外機の清掃

Periodically check the outdoor unit for debris, leaves, or dirt that may obstruct airflow. Carefully remove any obstructions. Do not spray water directly onto the electrical components.

6.3一般的なクリーニング

Wipe the indoor unit's surface with a soft, dry cloth. For stubborn stains, use a damp cloth with a mild detergent, then wipe dry. Do not use harsh chemicals or abrasive cleaners.

7。 トラブルシューティング

Refer to the table below for common issues and their potential solutions. If the problem persists, contact qualified service personnel.

問題考えられる原因解決
ユニットが起動しない電源がありません。リモコンの電池残量が少なくなっています。タイマー機能が動作しています。電源接続と回路ブレーカーを確認し、リモコンの電池を交換し、タイマー設定をキャンセルします。
冷暖房不足Dirty air filters; Blocked air inlet/outlet; Room too large; Doors/windows open; Temperature setting incorrect.Clean air filters; Remove obstructions; Ensure room size is appropriate; Close doors/windows; Adjust temperature setting.
異常なノイズLoose parts; Unit not level; Foreign object in fan.Check for loose parts and tighten; Ensure unit is level; Turn off and inspect for foreign objects (contact service if unsure).
室内機からの水漏れ排水管の詰まり、不適切な設置。Clear drain pipe obstruction; Contact installer for inspection.
Wi-Fi接続の問題ルーターの問題、Wi-Fi パスワードが正しくない、ユニットがルーターから離れすぎている。ルーターを再起動します。アプリで Wi-Fi パスワードを再入力します。ユニットをルーターに近づけるか、Wi-Fi エクステンダーを使用します。

8. 仕様

Detailed technical specifications for the BASIC HALO Split Air Conditioner, Model BSACH-F18CD.

特徴仕様
ブランド名ベーシック
モデル情報BSACH-F18CD-I, BSACH-F18CD-O
製品寸法99.1 x 61.2 x 44.1 cm; 62 キログラム
効率高い
容量1.54立方フィート
年間エネルギー消費量4909キロワット時
インストールタイプスプリットシステム
部品番号BSACH-F18CD
フォームファクターミニスプリット
特集暖房・冷房機能
巻tage220ボルト
ワットtage560ワット
含まれるコンポーネントなし
電池は付属していますか?いいえ
電池は必要ですか?はい
アイテム重量62キログラム
冷却能力18400 英国熱量単位
電源コード式電気
モデル名BSACD F18CD

9. 保証とサポート

For warranty information, please refer to the warranty card included with your product or contact your local dealer. Keep your purchase receipt as proof of purchase.

For technical support, service, or spare parts, please contact BASIC customer service through their official website or the contact information provided at the point of purchase. When contacting support, please have your model number (BSACH-F18CD) and serial number ready.

© 2023 BASIC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.