Metabo FSB 36-18 LTX BL 40 Cordless Brush Cutter Instruction Manual

導入

This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Metabo FSB 36-18 LTX BL 40 Cordless Brush Cutter. Please read this manual thoroughly before using the tool and keep it for future reference.

重要な安全上の注意事項

電動工具を使用する際は、常に安全を最優先にしてください。これらの指示に従わないと、重傷を負う可能性があります。

• Always wear appropriate safety gear, including eye protection, hearing protection, and gloves, when operating this tool.
• Be aware of flying debris when using the grass cutting attachment and keep bystanders at a safe distance.
• When using the brushwood cutting attachment, be cautious of cut hazards and keep hands and feet away from the cutting area.
• Ensure the work area is clear of obstacles and hazards before starting.
• 安全に操作するために、必ずこのユーザー マニュアルに記載されている指示に従ってください。

パッケージ内容

パッケージにすべてのアイテムが含まれていることを確認します。

• 自転車のハンドル
• Back carry strap
• ガード
• Twin line spool (line Ø 2 mm, 4 m)
• Brush cutter with 3 blades
• Adapter for blades
• Combo-spanner
• ロックピン
• 注意: バッテリーパックと充電器は付属していません。

セットアップと組み立て

1.製品オーバーview および寸法

Refer to the diagram above for an overview of the brush cutter components and general dimensions. The diagram illustrates the overall structure and key parts of the tool, including the bike handle and cutting head.

2. Attaching the Bike Handle

Attach the bike handle to the shaft as shown in the assembly instructions provided with the product. Ensure it is securely fastened for safe operation and comfortable grip.

The handle features rubberized grip areas for enhanced control and comfort during use. The safety switch is integrated into the handle for immediate power control.

3. Installing the Guard and Cutting Attachment

Install the guard over the cutting head to protect against debris. Depending on your task, attach either the twin line spool for grass cutting or the 3-blade brush cutter for denser brushwood. Use the provided adapter for blades if necessary. Ensure all components are tightened securely.

4. バッテリーの取り付け

This brush cutter operates on a powerful 36 Volt system using two 18 Volt Metabo battery packs. Insert two charged 18V battery packs into the designated slots on the tool. Ensure they click into place firmly. The robust metal gear housing and additional hoop guard protect the battery pack during use.

5. ショルダーストラップの調整

Attach and adjust the back carry strap to achieve a healthy and balanced working position. The strap helps distribute the tool's weight, reducing fatigue during extended use.

操作手順

1. Starting the Brush Cutter

Ensure all safety precautions are observed. Press the safety switch and then the trigger to start the motor. The powerful brushless motor provides high cutting performance and fast work initiation.

2.速度制御

The brush cutter features stepless speed control, allowing you to adjust the cutting speed according to the task and material density. This provides flexible working conditions.

3. Using the Twin Line Spool for Grass

For cutting grass, use the twin line spool. To readjust the line length during operation, gently tap the spool head against the ground. This mechanism extends the line without interrupting your work.

The image shows the cutting head effectively trimming grass, demonstrating its precision and power for detailed work.

4. Using Blades for Brushwood

For denser vegetation and brushwood, attach the 3-blade brush cutter. This provides robust cutting capability for more demanding tasks. Always ensure the blade adapter is correctly installed.

The brush cutter is designed for versatile use in various outdoor environments, from clearing edges to managing larger areas of vegetation.

メンテナンス

1. Metabo Quick Thread Change

The Metabo quick thread change system allows for fast and tool-free replacement of the line spool. You can change the thread without removing or opening the spool, simplifying maintenance.

2.一般的なクリーニング

After each use, clean the brush cutter, especially the cutting head and guard, to remove grass clippings, dirt, and debris. Ensure the tool is disconnected from the battery packs before cleaning. Use a damp 布で拭いてください。刺激の強い化学薬品や研磨剤は使用しないでください。

トラブルシューティング

If you encounter issues with your Metabo FSB 36-18 LTX BL 40, consider the following:

• ツールが起動しません: Ensure battery packs are fully charged and correctly inserted. Check that the safety switch and trigger are engaged properly.
• 切断性能の低下： The cutting line may be too short or worn, or the blades may be dull. Replace the line or sharpen/replace blades as needed.
• 過度の振動： Check for damaged or unbalanced cutting attachments. Ensure all components are securely fastened.

For persistent problems, please contact Metabo customer support or an authorized service center.

仕様

保証情報

For detailed information regarding the warranty coverage for your Metabo FSB 36-18 LTX BL 40 Cordless Brush Cutter, please refer to the official warranty documentation provided with your purchase or visit the official Metabo webサイトをご覧ください。保証条件は地域によって異なる場合があります。

Support and Compatibility

1. Cordless Alliance System (CAS) Compatibility

This tool is 100% compatible with the 18 Volt class of the Cordless Alliance System (CAS). This means you can combine it with all 18V battery packs and chargers from CAS brands. For more information on compatible products, visit www.cordless-alliance-system.com.

2. カスタマーサポート

Should you require further assistance, technical support, or spare parts, please contact Metabo customer service. Contact details can typically be found on the official Metabo webサイトまたは製品ドキュメントに記載されています。