ホフトロニック LED Damp Room Light - Model 552531 Instruction Manual

製品終了view

This manual provides comprehensive instructions for the HOFTRONIC LED Damp Room Light, a 150 cm, 60W fixture designed for various environments. It features a neutral white light at 4000K and an IP65 rating for water and dust resistance, making it suitable for both indoor and outdoor applications.

The fixture is equipped with two LED fluorescent tubes, delivering a total of 9600 lumens at an efficiency of 160 lumens per watt. It is constructed from durable ABS and polycarbonate materials, offering resistance to chemical vapors and impacts. The patented flicker-free design ensures stable illumination, reducing eye strain.

重要な安全情報

警告： Always disconnect the power supply at the main circuit breaker before attempting any installation, maintenance, or repair procedures to prevent electric shock.

• 設置は、すべての地域および国の電気規則に従って、資格のある電気技師が行う必要があります。
• Do not modify the product in any way not explicitly described in this manual. Unauthorized modifications may void the warranty and pose safety risks.
• 取り付け面が構造的にしっかりしており、器具の重量を支えることができることを確認してください。
• The operating temperature range for this fixture is -20 °C to +40 °C. Do not operate outside this range.
• 梱包材は子供の手の届かないところに保管してください。

パッケージ内容

パッケージに次のすべてのコンポーネントが含まれていることを確認します。

• 1x HOFTRONIC LED Damp 室内照明器具
• 2x LED Tubes (G13 fitting)
• 1x LED Driver (integrated)
• 取り付けネジ
• 壁プラグ
• ステンレス製取り付けブラケット

インストール手順

1. 準備

• 作業を始める前に、設置場所への電源がメイン回路ブレーカーで完全に切断されていることを確認してください。
• すべてのコンポーネントを開梱し、損傷がないか検査します。

2. 器具の取り付け

Select a suitable mounting location. The fixture is designed for secure wall or ceiling mounting.

Image: Close-up of the fixture's mounting clips and cable gland.

• Use the provided mounting brackets as a template to mark the drilling points on your chosen surface.
• マークした箇所に穴を開け、壁プラグを挿入します。
• Securely attach the mounting brackets to the surface using the provided screws.
• Attach the light fixture to the installed mounting brackets.

3。 電気接続

Access the internal wiring compartment by carefully turning the two plastic nipples located on the top ends of the fixture's metal cover. Once turned, the cover can be lifted.

画像: 内部 view of the fixture with G13 sockets and wiring.

• Connect the main power supply (220-240V AC) to the fixture's wiring terminals. Ensure correct connection of Live (L), Neutral (N), and Earth (PE) wires.
• This fixture supports linking multiple units in series. If connecting multiple lights, use the cable glands on the side of the fixture for secure and waterproof cable entry/exit.

4. Inserting LED Tubes

Carefully insert the two LED tubes into the G13 sockets within the fixture. Ensure they are securely seated and twisted into place.

Image: LED tube with G13 pins, demonstrating flicker-free technology.

5. Closing the Fixture

• Replace the fixture cover, ensuring it is properly aligned and the plastic nipples are turned back to their locked position to maintain the IP65 seal.
• Secure the cover with the stainless steel clamp提供されます。

6. 電源オン

• メイン回路ブレーカーで電源を復旧します。
• 照明器具が適切に動作するかテストします。

操作手順

HOFTRONIC LED Damp Room Light is designed for simple operation:

• The light is controlled by a standard wall switch connected to its power supply.
• Upon activation, the fixture provides instant, flicker-free neutral white light at 4000K.
• この器具は調光できません。

Image: Compatibility information for different ballast types.

メンテナンス

To ensure optimal performance and longevity of your HOFTRONIC LED Damp Room Light, follow these maintenance guidelines:

• クリーニング： Disconnect power before cleaning. Clean the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the polycarbonate and ABS materials.
• チューブの交換: If an LED tube needs replacement, ensure the power is off. Carefully open the fixture, remove the old tube by twisting and pulling, and insert a new compatible G13 LED tube. Ensure the new tube is securely seated before closing the fixture.
• 検査： Periodically check the mounting hardware and electrical connections for security and signs of wear or damage.

トラブルシューティング

HOFTRONIC LED Dに問題が発生した場合amp Room Light, refer to the following troubleshooting steps:

• ライトが点灯しない:
  • Check the power supply at the main circuit breaker to ensure it is not tripped.
  • Verify that all electrical connections within the fixture are secure and correctly wired.
  • Ensure both LED tubes are correctly inserted into their G13 sockets.
  • Confirm that the wall switch is in the 'ON' position.
• 光のちらつき:
  • This fixture is designed to be flicker-free. If flickering occurs, check for unstable power supply or loose connections.
  • Ensure the fixture is not connected to an incompatible ballast type (e.g., electronic or high-frequency ballasts).
• 明るさを下げる:
  • Clean the exterior of the fixture and the LED tubes to remove any dust or debris that may be obstructing light output.
  • Verify that the correct type of LED tubes are installed and are not nearing the end of their lifespan.

If the issue persists after following these steps, please contact customer support or a qualified electrician.

技術仕様

Image: EU Energy Label for Model 552531.

詳細なエネルギー情報については、EU の公式エネルギーラベルを参照してください。

View EU Energy Label (Model 552531)

保証とサポート

This HOFTRONIC LED Damp Room Light (Model 552531) comes with a 5-year warranty, reflecting its superior build quality and expected lifespan of over 50,000 hours.

Image: 5-Year Warranty and 50,000 Hours Lifespan.

For technical support, warranty claims, or further assistance, please contact your authorized HOFTRONIC retailer or visit the official HOFTRONIC web連絡先情報のサイト。