導入
The VOX VFS3 is a dedicated 3-button footswitch designed to enhance the functionality and control of your VOX Mini Go series amplifier. This footswitch allows for hands-free operation of various amplifier features, such as program switching, effect on/off, or looper control, depending on your specific Mini Go amplifier model. This manual provides essential information for the proper setup, operation, and maintenance of your VFS3 footswitch.
安全情報
- ユニットを雨や湿気にさらさないでください。
- ユニットを熱源の近くや直射日光の当たる場所に置かないでください。
- ユニットを分解したり改造したりしないでください。修理は必ず資格のある専門家にご依頼ください。
- Use only with compatible VOX Mini Go amplifiers。
- お子様の手の届かない場所に保管してください。
パッケージ内容
- VOX VFS3 3-Button Footswitch (with integrated cable)
- ユーザーマニュアル（このドキュメント）
製品終了view
The VFS3 footswitch features three robust buttons, each with an associated LED indicator, and an integrated cable for connection to your amplifier。
フロント view of the VOX VFS3 3-Button Footswitch. It features three silver footswitches labeled 1, 2, and 3, each with a corresponding LED indicator above it. The VOX logo is on the left, and 'VFS3' is on the bottom right.
側 view of the VOX VFS3 footswitch, highlighting its compact and durable metal casing.
戻る view of the VOX VFS3 footswitch, displaying the integrated cable that connects to the amplifier. The VOX logo is prominently featured.
設定
- Connect the Footswitch: Locate the footswitch input jack on your VOX Mini Go amplifier. This is typically a 3.5mm (1/8-inch) stereo jack.
- Insert the Cable: Firmly insert the integrated 3.5mm cable from the VFS3 footswitch into the footswitch input jack on your Mini Go amplifier。
- 電源オン: Turn on your VOX Mini Go amplifier. The footswitch is powered by the amplifier, so no external power supply is needed for the VFS3.
- 接続を確認します: の amplifier should recognize the footswitch. Refer to your Mini Go amplifier's manual for specific indications or settings related to footswitch connection.
The VOX VFS3 footswitch connected to a VOX Mini Go amplifier, illustrating the proper connection of the cable to the ampライファの入力ジャック。
操作手順
The specific functions controlled by the VFS3 footswitch buttons (1, 2, and 3) are determined by the connected VOX Mini Go amplifier model and its current settings. Please consult the user manual for your specific VOX Mini Go amplifier for detailed information on footswitch assignments and configuration.
Common Functions (May Vary by Amplifier Model):
- Program/Preset Switching: Buttons may be assigned to switch between amplifier programs or presets (e.g., Clean, Overdrive, Distortion).
- エフェクトのオン/オフ: Control individual effects (e.g., Reverb, Delay, Chorus) by toggling them on or off.
- ルーパーコントロール: For Mini Go models with a built-in looper, the buttons often control looper functions such as:
- ボタン1: 録音/再生
- ボタン2: 停止
- ボタン3: Clear/Undo
- タップテンポ： いくつかの amplifiers may allow one of the buttons to be used for tap tempo functionality for time-based effects.
The LEDs above each button indicate the status of the assigned function (e.g., effect on/off, selected program). Refer to your amplifier's manual for the meaning of specific LED colors or states.
メンテナンス
- クリーニング： 柔らかく乾いた布で拭いてください。研磨剤入りの洗剤、ワックス、溶剤は使用しないでください。
- ストレージ： When not in use for extended periods, store the footswitch in a clean, dry environment away from extreme temperatures.
- ケーブルのお手入れ: Avoid sharp bends or kinks in the integrated cable to prevent damage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| フットスイッチが反応しない | ケーブルが完全に挿入されていません。 Amplifier not powered on; Incorrect ampライファイア設定。 | Ensure the 3.5mm cable is securely connected to the amplifier. Verify the amplifier is powered on. Check your Mini Go amplifier's settings to ensure footswitch control is enabled and configured correctly. |
| LEDが点灯しない | No power from amplifier; Faulty connection. | 確認する amplifier is on and the cable is properly connected. The footswitch draws power from the amplifier。 |
| Buttons perform unexpected functions | Footswitch assignments are incorrect on the amplifier。 | Refer to your VOX Mini Go amplifier's manual to reconfigure the footswitch button assignments. |
仕様
- モデル： VFS3
- 対応デバイス: VOX Mini Go Ampリファイアー
- コネクタタイプ: 3.5mm Jack (integrated cable)
- 材料： 金属シャーシ
- 寸法（長さ×幅×高さ）： 約7.9 x 3 x 2.5インチ（20.1 x 7.6 x 6.4 cm）
- 重さ： 約1.1ポンド（0.5kg）
- 電源: 接続された ampリファイアー
保証とサポート
For warranty information and technical support, please refer to the documentation provided with your VOX Mini Go amplifier or visit the official VOX webサイトでご確認ください。購入証明として購入レシートを保管してください。