BALDR Digital Bathroom Clock with Timer Instruction Manual

1. はじめに

Thank you for choosing the BALDR Digital Bathroom Clock with Timer. This device is designed to provide accurate time, indoor temperature, and humidity readings, along with a convenient shower timer, all within a splash-proof design suitable for wet environments. Its versatile mounting options allow for placement on various surfaces.

Image: BALDR Digital Shower Clock with Timer banner, highlighting the product's main features.

2 製品の特徴

• IP24 Splash-Proof Rating: Suitable for bathrooms and kitchens.
• クリアなLCDディスプレイ: Shows time, indoor temperature, and humidity.
• Tap-Sensitive Timer: Easy setting for 1-minute or 10-minute increments.
• 多彩な取り付け: Freestanding with built-in stand or wall-mounted with suction hook.
• 温度単位: 華氏 (°F) と摂氏 (°C) を切り替えます。
• 時間形式: Switch between 12-hour and 24-hour display.
• 電池駆動: Operates on two AAA batteries (not included).

Image: The BALDR Digital Bathroom Clock with Timer mounted in a shower, displaying time, temperature, and humidity.

3. セットアップ

3.1 バッテリーの取り付け

1. 時計の裏側にある電池収納部を見つけます。
2. 電池ボックスのカバーを開きます。
3. 正しい極性（+と-）を確認して、単4電池2本を挿入します。
4. 電池カバーをしっかりと閉じてください。

3.2取り付けオプション

The clock features an innovative flip design for versatile placement:

• 自立型： Use the built-in stand to place the clock on any flat surface, such as a countertop or shelf.
• ウォールマウント： Flip the clock 180 degrees and use the included suction hook to mount it on any non-porous surface like glass or tiles. Ensure the surface is clean and dry before attaching the suction hook for optimal adhesion.

Image: The BALDR Digital Bathroom Clock demonstrating its wall-hanging and desk-standing capabilities with a 180-degree flip design.

4. 操作手順

4.1初期電源オン

After battery installation, the clock will power on and display default time, temperature, and humidity. It may take a few moments for the temperature and humidity sensors to stabilize.

4.2 時刻と日付の設定

The clock features tap-sensitive buttons on the side for adjustments. Typically, a 'SET' or 'MODE' button (often indicated by an icon) is used to cycle through settings (time, date, 12/24hr format, °F/°C). Use the '+' or '-' buttons (often indicated by '10' and '1' for timer functions, which also serve for general adjustments) to change values. Refer to the quick start guide included with your product for specific button functions and sequences.

4.3 温度単位の切り替え（°F/°C）

Press the dedicated °F/°C button or cycle through the settings using the 'MODE' button until the temperature unit flashes, then use the adjustment buttons to select your preferred unit.

4.4 Switching Time Format (12-hour/24-hour)

Press the dedicated 12/24H button or cycle through the settings using the 'MODE' button until the time format flashes, then use the adjustment buttons to select your preferred format.

4.5 Using the Shower Timer

1. タイマーの設定： The clock has tap-sensitive buttons on the side. Tap the '1' button to add 1 minute to the timer, or the '10' button to add 10 minutes.
2. タイマーの開始: Once the desired time is set, the timer will automatically begin counting down after a few seconds of inactivity, or by pressing a 'START' button if available.
3. タイマーの一時停止/停止: Tap the 'START/STOP' button (if available) or hold down one of the timer setting buttons to pause or stop the countdown.
4. タイマーをクリアする: Tap the 'CLEAR' button to reset the timer to zero.
5. アラーム： The timer will beep when the countdown is complete.

Image: The BALDR Digital Bathroom Clock highlighting its side touch buttons for timer settings and various placement methods.

5. メンテナンス

5.1 クリーニング

時計を柔らかくてdで拭いてくださいamp cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the battery compartment is sealed before cleaning.

5.2 電池の交換

Replace batteries when the display becomes dim or the clock stops functioning. Always replace both AAA batteries at the same time with new ones. Dispose of used batteries responsibly.

5.3 耐水性

The clock has an IP24 splash-proof rating, meaning it is protected against splashing water from any direction. It is not designed for full submersion. Avoid directing strong jets of water directly at the device.

6。 トラブルシューティング

• ディスプレイが空白または暗い場合: Check if the batteries are inserted correctly. Replace with fresh AAA batteries.
• 時刻/日付が正しくありません: Follow the instructions in section 4.2 to reset the time and date.
• タイマーが応答しません: Ensure the clock has sufficient battery power. Gently tap the buttons; avoid pressing too hard.
• 不正確な温度/湿度: Allow the clock to sit in its intended environment for at least 30 minutes for sensors to acclimate.
• Suction hook not holding: Ensure the mounting surface is clean, dry, and non-porous. Press firmly to remove air bubbles.

7. 仕様

Image: The BALDR Digital Bathroom Clock with Timer showing its dimensions (110mm x 110mm).

8. 保証情報

This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your purchase or visit the official Baldr webサイトでご確認ください。保証請求のために購入証明書を保管してください。

9. カスタマーサポート

If you encounter any issues or have questions regarding your BALDR Digital Bathroom Clock with Timer, please contact Baldr customer service. Contact information can typically be found on the product packaging, the official Baldr webサイト、または小売店のサポート チャネルを通じて入手できます。